LAN, short for Local Area Network, is a network that connects multiple devices in a limited geographical area, such as a room, an apartment or a building. Currently, most LANs are based on Wi-Fi or Ethernet transmission.

learn more… | top users | synonyms

0
votes
1answer
60 views

How to add access to a host via symbolic name?

From one LAN I have access to the host 10.0.0.*** via symbolic name say a007, which was added to my /etc/hosts as: 10.0.0.*/*/* a007 But now I need to use this host as a007 from another LAN and I ...
1
vote
3answers
92 views

Create a /16 (255.255.0.0) local network

My bare knuckles networking understanding led me to believe that if I set an IP address of, for example, 10.0.2.25 with netmask 255.255.0.0 on a machine, it should see all hosts in the subnet ...
-4
votes
1answer
163 views

Broke my company's network, how do I get it set back up? [closed]

My dad moved his office. The new location will only have WiFi access, but he still needs his server setup and the other machines connected to it. The server (don't laugh) is an old Windows NT 4.0. ...
1
vote
1answer
193 views

Connecting to NAS boxes/printer located on local private WAN network

The set up Here's a diagram of my network: # Building 1 (Main) --------- | MODEM | --|------ | |-[WIRED] | --|------------------------------------------ | DrayTek Vigor 2130N ...
0
votes
1answer
201 views

how to connect two different lans [closed]

I have in my office two different LANS with two different ISP. Lan A is faster than Lan B. We want to share files and printers and everything as if it was only one LAN, the thing is that we don't ...
0
votes
1answer
134 views

Is Cisco Misquoting the Nexus 7000 specs [closed]

Looking at the following image: http://blogs.cisco.com/wp-content/uploads/7000-family-550x358.png Cisco is quoting the 7009 as having a 10GigE density of 336 and a backplane bandwidth of 550G/slot. ...
2
votes
1answer
278 views

Is a Fabric Module required for a Nexus 7009, or is it part of the Chassis?

I noticed that Cisco lists separate fabric modules for the Nexus 7009 switch. If I were to simply buy the Nexus 7009 Chassis (N7K-7009), what would I need at minimum? I just want to confirm, but I ...
0
votes
1answer
224 views

Effects of IW10 (initcwnd 10 initrwnd 10) on high speed LAN based TCP/IP communications?

What does changing the number of packets sent during the initial congestion window to 10 have on LAN connections? Via: ip route change default via GATEWAY dev INTERFACE initcwnd 10 initrwnd 10 Is ...
2
votes
1answer
61 views

May a low DRAM router be a bottleneck for a LAN?

I need to install a LAN that is a hybrid between a star LAN and a cascade LAN. There are two levels (I mean that the maximum number of link to go from the central switch to the most external switch is ...
0
votes
1answer
144 views

Multiple WAN to single LAN

I have a block of static external IPs and I'm trying to route them to a single internal server. We have a Sonicwall TZ-210; trying to set this up results in no outbound traffic and an error warning ...
2
votes
1answer
133 views

How to bind stackable switches

Let's say that I have a non modular switch, and that in future I might need to expand my LAN, connecting it to more switches. If I take stackable switches, physically how do I bind them? May I take a ...
0
votes
1answer
70 views

Adding some content to html response

I would like to know is it possible to achieve with (my guess is) a proxy server to add some content to users response? Let's say I would like to add a div to each html document which is being ...
0
votes
4answers
123 views

LAN Load Balancing Router

Everything I find is for WAN load balancing. Our customer wants to have a setup where two servers are connected to the same router. To the outside network devices connected to the router, they think ...
0
votes
3answers
64 views

How to find to which network i'm actually connected [closed]

In our office we have both LAN and Wi-Fi network. say i have now connected to both LAN and WiFi. now when i give ipconfig. It is showing both LAN IP and also WiFi IP. I want to know, to which network ...
0
votes
1answer
584 views

Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static ...
1
vote
2answers
177 views

How to implement firewall in LAN(out of users' os) like EC2 have done?

In aws ec2, users can set up security groups which works like a firewall, usually, firewall work behind a gateway/nat server, however, I found that firewall in EC2 works in the LAN, too. For example, ...
0
votes
0answers
149 views

Clients suddenly stop receiving data from the network

I'm facing a connection problem on a small network: 10 clients connected to a Netgear WNR612v2 WiFi router with DHCP disabled; 4 clients connected to a Linksys WRT160NL router with DHCP active and ...
1
vote
2answers
721 views

How can I configure my network to allow bi-directional traffic between two lans?

Here's my current setup: (and it may require reworking): 2 LAN networks - 192.168.41.0, 192.168.21.0 2 Public IP's (they are assigned to us by specifying MAC Addresses - not subnetted) ...
0
votes
4answers
142 views

local SSH works when using “localhost”, but not using IP address

I'm having difficulty setting up ssh for a laptop on my LAN. I think I have done all the obvious things. On the server: ps -A | grep sshd 18278 ? 00:00:00 sshd and ss -lnp shows sshd ...
8
votes
3answers
581 views

Migrate raw disk image over LAN

Here is my situation: Two dedicated servers in the same datacenter with gigabit ethernet between them. Both dedicated servers booted into a rescue environment based on Debian Squeeze with extra ...
0
votes
2answers
772 views

how can I block all traffic that is coming to and from an IP address using iptables

I am trying to block all traffic that is both coming and going to an internal IP address (this server acts as a router for the network). so far I have tried the following: iptables -A INPUT -s ...
0
votes
2answers
97 views

OpenVPN as a service, client physically connected to network

I've got OpenVPN running as a service on a client's computer, however oftentimes he will be in the office and able to physically connect to the network. The issue I have with this, is that even when ...
0
votes
1answer
102 views

Requiring all network traffic go through VPN in Windows 7

I have a VPN service that I can can connect to through Network and Sharing Center manually and this works great, but sometimes I forget to enable it or it goes down and then my traffic is not tunneled ...
-2
votes
2answers
754 views

How do I send hostname info to Airport DNS from Linux? [closed]

My router is an Airport Extreme. I can easily ssh to other OS X machines via hostname.local (example1.local, exmaple2.local, etc) once it is set in in the preferences. But despite the fact that my ...
0
votes
1answer
515 views

Dual-port server acting as router, but LAN can't see WAN

Using Windows Server 2012 Essentials. I've got two ethernet ports. One is connected to a router which is connected to the internet. This portion of the network is fine. The router runs DHCP on the ...
0
votes
2answers
133 views

What do I request from the LAN upgrade contractor to avoid simple oversights? [closed]

The company for which I work have allowed me to hire a LAN wiring contractor to completely overhaul the building LAN. Currently there are old 10MBit Ethernet cables and switches running and I ...
0
votes
2answers
183 views

LAN users not listed over wifi

I recently created a small office network with 10+ computers. 9 of them are desktop computers so I used Ethernet cable to connect them.. The computers are connected to a switch via a patch panel and ...
1
vote
1answer
671 views

Subversion server behind firewall and Apache reverse proxy exhibits intermittent hanging

Here's my situation: 1) DMZ: I have an self-signed SSL Cert on an Apache server (our bastion host) configured to run as a reverse proxy for 7 other LAN servers (subversion, ldap, jenkins, ...
0
votes
1answer
259 views

ubuntu set up as router lan pc can ping one direction and get shares but other direction can not ping or connect shares

I have ubuntu router questions. you can see tracert can complete on way but not other way. How to make that work? (a better visual layout exists here) ...
1
vote
1answer
280 views

2 nic cards in ubuntu PC, one to router, one to win7 pc, make connected pc on router talk to win7 on 2nd nic

There are 2 win7 pc, 2 100 mb/s routers and 1 ubuntu 12.04 pc. I scanned a diagram of the Lan setup with IP's ...
0
votes
1answer
225 views

MPLS link not forwarding

We have a new MPLS service and I'm having trouble getting it to work (it seems like a routing issue). It's a T3 with two circuits: a public wan port and a private MPLS circuit connecting 2 sites. ...
2
votes
2answers
2k views

Cannot ping over LAN until a ping is received

I have two OSX machines on a local subnet. Pings from Machine A to Machine B consistently timeout until Machine B pings Machine A. After B pings A, A can successfully ping B, but this success is ...
-1
votes
1answer
73 views

Standard solutions to keep LAN connection up

Do you use some "standard" solution to manage your server connectivity? In particular, how do you ensure that, week after week of uptime, your LAN remains connected, even if the router should reboot ...
0
votes
2answers
98 views

Securing LAN by restricting New Users

How can we restrict any user's PC connecting to the network based on their MAC Address?
1
vote
3answers
7k views

Duplicate MAC address on the same LAN possible?

Let's say someone is on the same network as me and spoofs their MAC address to match mine: Is this possible? Can two or more clients with the same MAC address be on the same network at the same time ...
13
votes
3answers
662 views

Prevent administrative users from assigning duplicate static IPs to their workstations

How can I prevent a user that is an administrator on their local machine from manually assigning an IP to their network adapter that is in use on a server? Some users have done this, and it's caused ...
-1
votes
1answer
1k views

2 router network setup. Why does ping only work in one direction?

So the setup looks like this: There is a main WLAN-router/modem which is connected to the internet and serves the lower floor with WLAN. Now upstairs I have a second WLAN-router/modem (I will call it ...
-2
votes
3answers
170 views

No route to host after changing interface to static ip [closed]

I installed a Linux (Ubuntu) server inside my home LAN, initially it's automatically configured to use DHCP interface. I'm connecting to this server from another computer using that server's hostname. ...
-4
votes
1answer
154 views

Router vs switch in a LAN [closed]

If I have a LAN and and connect it with a switch, I understand it uses a CAM table to route packets in layer 2 (by saving mac to port relations). So far all good. However, when using a router for a ...
2
votes
2answers
4k views

Can't ping some IP addresses in the same subnet (LAN) Windows 2011 Server

Hi I’m running in Windows Small Server 2011 server standard (192.168.1.108), it’s my dhcp and dns server too, but suddenly all other users can’t get internet. My gateway is 192.168.1.1. After a lots ...
0
votes
2answers
482 views

Assigning static IP and domain name mapping to local server in LAN

I have developed a web application which will be deployed in a LAN environemnt. Clients will be Computers/Android Tablets/IPAD In order for communication between client and local server 1) need to ...
1
vote
2answers
144 views

Cisco sg100-08 connections

I have multiple computers, some have a 10/100 ethernet adapter while others have a 10/100/1000 ones. If I connect them together with the Cisco sg100-08 switch, do I keep the 1Gbit speed where possible ...
-1
votes
1answer
61 views

Would it be risky to disable LMHash in GPO?

I run a AD server with Windows 2008, I have clients running XP and Windows 7, now I've decided to enforce Lan Manager authentication by refusing LM & NTLMv1 encryption methood, would it be risky? ...
0
votes
1answer
649 views

How to enable TCP/IPV4 disabled on LAN via command prompt [closed]

I have unchecked tcp/ipv4 protocol from LAN properties & now iam unable to access the server or connect remotely. However i have serial console access to the server where i can use netsh command. ...
0
votes
1answer
2k views

CSS, JS and images are not loading while sharing WAMP over local network [closed]

I have share my wamp over my personal LAN . (Server IP : 192.168.0.100) When I am trying to access wamp server it's working perfectly. But when I open website hosted on server using client machine ...
-1
votes
1answer
67 views

VPN That Hijacks Lan (Can I use a VM?) [closed]

I have to use a VPN for work 'citrix anyconnect vpn' which unfortunately also routes lan through the VPN. This is a feature of the VPN. Is there a good / easy way or guide to do something like ...
1
vote
1answer
355 views

Connecting to another subnet's machine via ssh

I want to connect to my VPS via ssh. The output of ssh is the following: "No route to host" It seems, that it's because I'm located at a LAN and have no public IP. So, my question is, how can I ...
4
votes
4answers
968 views

How to wire 20 computers and 20 phones and 1 server into LAN?

I have currently 3 switches Two Netgear JFS524 with 24 slots, One Belkin with 16 slots. Server DSL Internet Router. Main question is how to connect switches together, two Netgear's are next to each ...
2
votes
3answers
236 views

Routing domain on lan

I have LAN setup with public server on it. The server is accessible via domain example.com. If I access example.com from within lan, it goes over my ISP. I wish it went just over my local network. ...
-1
votes
2answers
315 views

Tool to analyze the real time traffic in Windows XP SP2 [closed]

My client machine/(s) is/(are) Windows XP SP2. I can’t effort every time to have physical access to my server machine. To analyze the real time traffic and bandwidth between client and server machine, ...