2
votes
1answer
18 views

EPC mode on Seagate Constellation using Linux

I need to set EPC mode on Seagate Constellation disks connected to LSI 9690SA-4l controller. This is because the controller is not compatible with the disks unless the EPC mode is set – according to ...
0
votes
2answers
21 views

LSI MegaRaid live conversion from RAID 6 to RAID 0+1

I've currently got a lovely working server that has an LSI 9265-8i RAID card in it with 4x1TB RE4 drives, also running CacheCade Pro 2.0 with 2x180GB SSDs in RAID1. I currently have the main array ...
0
votes
0answers
19 views

Why MegaCli always returns blank?

Similar to this question (MegaCLI always returns blank output) with some differences. I am using perc h710p raid controller on Dell Ubuntu box. I download 1.01.39_Linux_Cli.zip (according to ...
1
vote
0answers
62 views

SuperMicro 119-7 - Install Problems 'no device driver found'

I have a set of servers that had Debian installed, and need to have Windows Server 2012 R2. Supermicro 119-7 / 10274-WRFT+ MegaRAID SAS 9266-8i Mount R2 in a flash drive, boot from it in UEFI mode ...
1
vote
1answer
39 views

LSI Raid 5 with 2 disks “not synced”

I have a system with a LSI 1064e SAS raid. The system is not booting, and when I enter the raid configuration utility, It says, that has 2 disc "Not synced". I didn't find the option to resync them, ...
5
votes
4answers
293 views

RAID level confusion (MegaCli vs megasasctl output)

I'm utterly new to working with LSI MegaRAID controllers and I'm confused as to what RAID level I am actually running. My server is equipped with 4 disks, 4TB each and I would like to have them ...
0
votes
1answer
192 views

How to perform disk test attached to LSI RAID controller

I have four Seagate ST33000657 SAS drives attached to LSi 9260-4i controller. I want to test them for hw errors and bad sectors, before launching into production. I ve tried SeaTools, but it's not ...
0
votes
1answer
168 views

Correct VHDX sector size in Hyper-V enviroment for a RAID array

What is the correct sector size (which available in Powershell as options, when creating a new vhdx) for RAID10 array with default stripe size? I am using LSI 9271-4i controller and 4x Seagate ...
2
votes
4answers
589 views

LSI RAID: Write cache policy affects read performance?

I have a server with a LSI MegaRAID SAS 9260-4i controller, RAID-5 with 3 x 2 TB disks. I did some performance testing (with iozone3) and the numbers show clearly that the write cache policy affects ...
0
votes
1answer
84 views

LSI Megaraid 150-6 as regular SATA controller

I have an old but reliable server board that does not have any SATA ports on it. Also i have LSI Megararaid 150-6 (with latest firmware) which i want to use as ordinary "dumb" SATA controller. I ...
0
votes
2answers
222 views

LSI Cachecade Pro 2.0 with RAID10 SSD Cache?

I'm trying to add a RAID10 SSD Cache to a VD by this command: [root@livecd storcli]# ./storcli64 /c0 add vd cachecade type=r10 drives=252:4,252:5,252:6,252:7 assignvds=0 Controller = 0 Status = ...
1
vote
2answers
258 views

SSDs, Hardware RAID, and TRIM

I was told by my datacenter that all HW raid, specifically the LSI 9260-4i hardware RAID controller, does not support SSD TRIM command. My question is, are there severe longevity/speed issues due to ...
0
votes
1answer
103 views

How to address a recurring low temperature error seen at every boot-up?

After updating to latest controller firmware, I started receiving the following error messages: LSI 2208 ROC: Temperature sensor below error threshold on enclosure 1 Sensors 5 thru 7 Is this ...
2
votes
1answer
547 views

Should I enable “Patrol Read” on SSD drives?

LSI, Intel and Dell RAID controllers (perhaps others) have a "Patrol Read" feature to try to spot when a drive is failing before it completely fails. LSI seems to disable patrol read on SSD by ...
4
votes
2answers
2k views

S.M.A.R.T data from disks behind LSI MegaRAID Controller in ESXi 5.1

I was looking at ways to get S.M.A.R.T info and R/W stats from drives behind LSI MegaRAID controller (9260-4i) in ESXi 5.1. ESXi has a command "esxcli storage core device smart get" to get S.M.A.R.T ...
4
votes
2answers
220 views

megaraid: Logical Drives at different RAID levels

I am currently using a SuperMicro machine that has an on-board LSI 2208 controller (MegaRAID class). I want to create a single array from two drives and then carve that up into: one RAID1 100GB ...
0
votes
1answer
238 views

LSI RAID not synchronizing

There is a HS22 Blade with RAID. I removed one of the mirrored disk, and used it for other, but now I'm inserting it back, but it doesn't sync from the working disk. cfggen shows the following: ...
1
vote
3answers
482 views

Why is the 9650SE RAID1 not showing the full size of the disks?

This is a follow-on to How can I grow a 3Ware 9650SE RAID1 under ESXi 5.0? I've successively replaced 1TB drives in my RAID1 with 2TB drives hoping that I can grow the datastore I've got in ESXi 5.0. ...
0
votes
1answer
545 views

How can I grow a 3Ware 9650SE RAID1 under ESXi 5.0?

Thanks to this question I've now got my ESXi 5.0.0 (Build 623860) running/booting off a physically enlarged 9650SE controlled RAID1 array. The 1TB drives had been replaced with 2TBs; I'd like to ...
0
votes
1answer
60 views

How to find out the amount of sectors available in a RAID physical disk for replacement?

So, to start with, let me confess I have no knowledge of RAID besides what I read in a few APC mags 5 years back and what the acronym stands for. Everything I know now comes from assumptions and the ...
0
votes
1answer
240 views

LSI 2208 9286-8e MegaRAID controller beeping when connected to 24-bay NexentaSTOR JBOD enclosure

I am getting beeping from the LSI external RAID controller even if I properly shutdown and there is no array re-initialization. Would I be required to use a battery back (BBU) with the LSI controller ...
0
votes
2answers
490 views

No drives showing on LSI 2008 SAS + HP SAS Expander

Followin this guide http://www.servethehome.com/supermicro-x8si6-f-motherboard-review-including-onboard-lsi-sas-2008-controller/ I got myself an RPC 4224 case (They are called Inter-Tech in Europe, ...
2
votes
1answer
306 views

LSI RAID-on-chip with RAID6 over two SAS links goes red when HDD enclosure is powered cycled; how to recover?

I have a RAID6 array managed by LSI 9286-8e card. I also have Sans Digital 24-bay NexentaSTOR JBOD enclosure with SAS extender built-in. They are connected to separate UPS devices. Normally, I'd ...
1
vote
0answers
176 views

Possible bad raid card / hard disks (LSI 9261-8i)

I am in a bit of bad spot at the moment, i have a dedicated server hosted by someone else, it has a LSI 9261-8i raid card installed, attached is: 3x300GB SAS 15K rpm disks (in RAID5) 5x2TB SATA ...
2
votes
1answer
63 views

mount hardware raid disk 1 with one disk and no hardware raid controler

I have one of two raid disk (from LSI raid card) There is a way to mount it in a PC and access to the disk without the raid card? Maybe mounting or skipping the first bytes!? Thanks in advance. ...
-3
votes
2answers
243 views

megaraid 8308ELP upgrade Recommendation [closed]

I have a Gateway E-9525R 2U, and I am looking to replace the raid card (an LSI 8308ELP) What I need (in order of necessity) is Vsphere Esx 5 compatibility Dual SFF-8087 (as it has a 6x backplane) ...
1
vote
1answer
170 views

How many RAIDs per RAID controller

I am going to build a SQL server and I need to have four independent RAID 10s. I am looking at different RAID controllers to choose from. For instance I am looking at LSI 9260-8I but I cannot figure ...
1
vote
1answer
5k views

LSI RAID monitor reports “Consistency Check inconsistency logging disabled”

I have a server with a LSI MegaRAID 9261-8i controller. Recently I started getting alerts like this one: Controller ID: 1 Consistency Check inconsistency logging disabled, too many ...
0
votes
3answers
727 views

MegaRAID Storage Manager Error 1920 “Service MRMonitor (MegaMonitorSrv) failed to start.” on Windows Server 2003 R2 x64

I'm trying to install the MegaRAID Storage Manager 8.10 provided by SUPERMICRO, but I keep getting an error 1920 that "Service MRMonitor (MegaMonitorSrv) failed to start. Verify that you have ...
3
votes
1answer
775 views

Megaware Raid 10

I have 22 disks and would like to create a Raid 10. Unfortunately my raid controller (MegaRAID SAS 9260-8i) is only capable to handle 8 arrays within a RAID 10. Because of that I could only use 16 ...
7
votes
2answers
3k views

LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 ...
0
votes
2answers
536 views

MegaRAID SAS 8208XLP

I'm just wondering whether anyone knows if I can use a Debian distro with the MegaRAID SAS 8208XLP controller. Currently at the moment LSI only supply drivers/support for RHEL/CentOS but I was ...
2
votes
2answers
1k views

Upgrading Raid Card - import configuration - Perc 5

I am upgrading my Perc 5 to a Perc 5i (allegedly lets me have hot spares and power management). When I put the 5i card in and connect the drives, it does not recognise the previous RAID ...
0
votes
1answer
388 views

Why can't add a hot spare in freebsd? Can anybody help me fix it?

Why can't add a hot spare? # mfiutil add e1:s1 mfid0 mfiutil: Drive 1 is not available I found the reason is e1:s1 is marked online, it must be Marked as an unconfigured good drive, and to mark ...
1
vote
1answer
5k views

LSI MegaRaid warning: Patrol Read can't be started

We run a HyperV server on RAID-6 (the OS is Windows Server 2008 R2). The hardware is LSI MegaRaid SAS 8704EM2 controller, with 4x 1TB WesternDigital SATA drives. The server is up & running on this ...
2
votes
1answer
1k views

for ZFS: passthru, I-T mode on LSI 9260-8i?

LSI 9260-8i firmware version 2.0x the controller menu does only have RAID: 0, 5, & 6 Solaris ZFS requires passthrough or Initiator-target mode to get direct access to disks.....how to get that ...
1
vote
2answers
801 views

Monitor LSI 1068e RAID1 mirror status on Windows server?

Assuming that a client has an existing Windows 2008 server with a hardware RAID1 mirror built on an LSI 1068e SAS controller, what is a non-interactive way to monitor the array's status such that an ...
0
votes
1answer
644 views

MegaRaid Storage Manager Version to manage LSI 9260-8I through vSphere 4.1?

When I ran vSphere 4.0 I could use MSM 6.05 to manage my LSI card through the CIM provider, it would show up as a server to connect to. Since upgrading to vSphere 4.1 I my vSphere host does not show ...
1
vote
5answers
1k views

MegaCLI always returns blank output

This server is a Dell R200 running Ubuntu 8.04LTS using a LSI SAS1068E raid card supplied from Dell, I suspect that there might be some kind of RAID issue with the hardware raid built into the ...
0
votes
2answers
854 views

Hard drives continuously failing in Fujitsu RX300 server

We look after a Fujitsu RX300 S4 server that has 6 x 500GB SATA drives in a RAID-6 array, running from an LSI MegaRAID card (built into the motherboard). A couple of weeks ago, one hard drive ...
2
votes
2answers
1k views

Dell Perc 6/i Raid Monitoring on Linux 2.6.32-2x kernels

I am running an LSI raid (Dell Perc 6/i) on my Ubuntu 10.04 server. I want to monitor the raid array but it seems that there is no software for it. The raid drivers are part of the kernel, but I dont ...
1
vote
3answers
3k views

Will RAID 00 give a performance increase over RAID 0?

According to this IBM page, RAID level-x0 allows more physical drives in an array. The benefits of doing so are larger logical drives, increased performance, and increased reliability. So say, ...
3
votes
1answer
208 views

Are PCIe v2 RAID controllers backward compatible with PCIe V1?

I am looking to add a PCIe V.2 RAID controller (LSI SAS 9280-4i4e) to an older Intel server (SR2500) which has PCIe V.1 slots. Does anyone have any experience with using RAID controllers designed for ...
3
votes
4answers
1k views

Very poor SCSI hd performance on IBM x336 with LSI 1030 RAID1

I'm experiencing very poor performance on an IBM x336 server with dual 73GB 15k hard drives on a U320 controller, LSI 1030. We're getting maybe 3.5MB/sec max (per HD Tune utility). It should be over ...
0
votes
2answers
1k views

Is it safe to flash LSI MegaRAID firmware from within MSM on a 'live' system?

When does the firmware actually get reflashed? Next time the server is restarted? I don't want to interrupt services but I'd love to get the latest update out of the way. (It fixes read/writes for ...
0
votes
1answer
669 views

LSI1068E hidden drives after failed raid volume creation

We are using LSI 1068E raid chipset with SAS drives. We had added new drives to the system, and tried to create new raid volume with the lsiutil, unfortunately the creation failed. The problem is ...
2
votes
1answer
6k views

Splitting a raidctl mirror safely

I have a Sun T5220 server with the onboard LSI card and two disks that were in a RAID 1 mirror. The data is not important right now but we had a failed disk and are trying to understand how to do ...
0
votes
2answers
1k views

Is it possible to run LSI SAS 9211-8i PCI-E 8 in PCI-E 16 Slot?

I just bought an LSI SAS 9211-8i HBA(Host bus adapter) to use with my new hardware. I realized after looking at the card that it required an x8 slot and my new mobo only x16 available. I keep on ...
3
votes
4answers
2k views

Severe write performance problem

[Sorry, I tried to stay short but it just was not possible] I'm running Linux 2.6.22.19 with linux-vserver 2.3.0.34 on a Fujitsu Siemens Primergy RX200 S3 for development purpose. Intel(R) Xeon(R) ...