0
votes
0answers
11 views

sar -b reports much too high statistics, are the I/O counted twice?

On a Linux server sar -b reports much too high read block statistics, sometimes 3.500.000 readb/s peak and around 2.500.000 readb/s sustain, which makes more that 1 gigabyte/s (according to the sar ...
0
votes
1answer
19 views

Error creating LVM snapshot: Module dm_snapshot not found

I've installed via apt-get lvm2: (precise)root@localhost:~# apt-get install lvm2 Reading package lists... Done Building dependency tree Reading state information... Done The following NEW ...
0
votes
0answers
5 views

lvm mirror doesn't resync the logical volulme

I trying to restore one lvm mirror using the old metadata, for restore the config i'm using the command vgcfgrestore -f redhat vgmirror but after the restore of the old metadata, the resync ...
1
vote
2answers
63 views

ZFS RAID0 pool without redundancy

I created a ZFS pool on Ubuntu 14.04 without specifiying RAID or redundancy options, wrote some data to it, rebooted the machine and the pool is no longer available (UNAVAIL). I don't have the exact ...
0
votes
0answers
24 views

swapoff running forever on LVM volume

I'm currently trying to resize my swapspace on a Proxmox VE server with LVM volumes, as I'm running out of space for LVM snapshots and the swapspace is fairly oversized: root@rb-srv-gus:~# free -m ...
0
votes
1answer
42 views

Redundancy: LVM+mdadm or LVM internal RAID

The task is to create LVM storage for virtual machine images. So LVM will be used in any case. There are two ways LVM providing redundancy: block mirroring lvcreate -m 1 --mirrorlog mirrored -n ...
1
vote
0answers
22 views

LVM physical volume priority

Linux LVM can combine several physical volumes in one group and when spread space of this group among logical volumes. If some slow devices will be added to group it may slow down all logical ...
0
votes
1answer
64 views

Which file system was I using?

This is an odd question of a somewhat forensic nature. I was running a server, which originally had openSuse 11.4 installed, and was upgraded twice (to v12.3 and v13.1). Recently, an update messed up ...
0
votes
2answers
34 views

Why the root partition is not reduced after attaching new partition to the /var directory?

This is my disk state before attaching new virtual disk: Filesystem Size Used Avail Use% Mounted on /dev/xvde1 4.9G 4.6G 1.3M 100% / tmpfs 828M 0 828M ...
2
votes
3answers
139 views

Repartitioning already mounted logical volumes

This is my current disk state on a physical CentOS machine: Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_ecomwise-lv_root 50G 47G 267M 100% / tmpfs ...
5
votes
1answer
202 views

Are ZFS pools or LVM volume groups more reliable for utilizing many partitions?

When deciding whether to use LVM volume groups or ZFS pools in configuring new file servers, what needs to be considered? Is there a "better" choice in the realm of multi-purpose file servers? Unlike ...
0
votes
0answers
22 views

Can traditional partition and LVM coexist? (RHEL6) [duplicate]

There are 2 disks which are configured as RAID1. I want to set system area (/boot, /, swap) as normal partitions. And I think those areas for Applications and Data should be LVM because they might be ...
0
votes
1answer
46 views

dd output file larger than input file when executed with conv=noerror,sync

I am trying to backup an LVM on one of my servers with the following command: dd bs=4M conv=noerror,sync if=/dev/vg_volgroup/LvmName | ssh myuer@myip "dd of=/home/myuser/LvmName bs=4M ...
3
votes
1answer
69 views

LVM in Linux with fdisk?

This question is similar to Is the fdisk partition type important when using lvm however will ask it for clarity. On a CentOS 6.5 insall, I accidentally took a new 3TB virtual disk and performed the ...
0
votes
0answers
13 views

How to shrink encrypted lvm? [duplicate]

I have a LV. on top of LV there is a luks volume and on top of luks there is an ext4. I already shrunk the ext4 and now i don't know how to correctly shrink luks and LV not to loose any data. how to ...
0
votes
1answer
50 views

size of extent on LVM2

in LVM1 there was a limit of 65k extends. So size of extent had to been chosen carefully between wasted space on partitions (to big extent) and maximal possible size of logical volume (too small ...
1
vote
1answer
144 views

How do I remove a locked Logical Volume ([pvmove0]) left over after a disk error?

Following some disk errors while I was moving some extents, I now have a hidden locked [pvmove0] which doesn't seem to have any physical extents assigned, although it is 4Mb long! # lvs -a ...
2
votes
1answer
112 views

Do I need to enable LVM at install time?

I'm setting up a CentOS dedicated server and I would like to use LVM (it's the right thing to do, isn't it?) The thing is, I'm not sure if I have an option to enable LVM at the time of installation. ...
2
votes
1answer
59 views

Amazon AWS: Can I attach volumes at runtime?

I can attach volumes in the AWS Web Console by going to Volumes and attach it to my instance. Unfortunately the Linux Server does not react to this addition of the volume. Nothing appears in dmesg, ...
0
votes
1answer
196 views

Grub install failing on Hardware RAID with LVM

I have a SuperMicro box with an Areca RAID controller installed. The RAID controller is configured for RAID 6 + Hot Spare. I am attempting to install Ubuntu 12.04 LTS. I set up LVM with separate ...
0
votes
1answer
190 views

ext4_orphan_cleanup errors on LVM

I'm running a server with Debian 7.2 on a RAID 1 with two drives with LVM on top and I keep getting these messages in my syslog. Should I be concerned? Is this a bug? What could it be deleting? Feb ...
2
votes
0answers
41 views

Change the logical volume

I am quite new this snapshot process. Let, I have three logical volumes as A, B, C. I worked on logical volume C. But accidentally when I restart the system, it goes to the snapshot A. How can I ...
1
vote
1answer
123 views

Linux Server OS on LVM on Software RAID: Best Practices and Considerations

I am preparing for a minimal Ubuntu Server 12.04 LTS that will simply run libvirt/KVM to host a handful of Ubuntu Server 12.04 LTS guests. On my KVM host I created a RAID 1 comprised of two physical ...
0
votes
1answer
47 views

Recovering LVM RAID-1 on different computer with only one drive?

I have a drive out of an old LVM RAID-1 that's been sitting for a while. I think the array contained a bunch of my photos from years ago (archived online) but I'd like to get at the original data and ...
2
votes
1answer
31 views

Expanding RAID6 with LVM

My question is a bit broader than the question title, but here is my situation: I have Synology Hybrid Raid (SHR) built on 2 x 2TB drives. I want to migrate to a software-RAID on a homegrown linux ...
0
votes
1answer
117 views

Is it a good practice to put all partitions into LVM? [closed]

I would like to know what is the best practice regarding the partitioning policy, especially when it comes to Logical Volume Manager. Is it better to put the entire partitioning into LVM or use it ...
1
vote
1answer
205 views

Boot failure with root on MD (RAID1) + LVM: udev event timing

A fresh install of Ubuntu Server 13.10 (x64) is having problems booting from its root volume located in md+lvm. I've kludged a solution for now, but I'd like to understand more about what's going on ...
2
votes
1answer
66 views

Converting LVM VolumeGroup/Volume identifiers to device names and vice versa

Question(s): What is the best way to convert LVM VolumeGroup/Volume identifiers (e.g. system/var) to device names (e.g. /dev/mapper/system-var or /dev/system/var) and vice versa? Is it safe to just ...
2
votes
0answers
146 views

Please help recovering lost volume group

After a reboot, the volume group on my server completely disappeared. [root@dal01 log]# vgdisplay No volume groups found [root@dal01 /]# lvdisplay No volume groups found [root@dal01 ~]# pvdisplay ...
2
votes
3answers
83 views

LVM: Using an image of a PV?

I have a logical volume spanning several drives. One of those drives (3TB, the largest of the bunch) is dying, and I am currently making an image of it (via ddrescue). I'm not yet sure on how to use ...
0
votes
0answers
47 views

LVM - after server reboot data changes of last 6 month lost

I have a server setup with a Proxmox VE on LVM groups. Today I could not kill some processes, so I decided to reboot the server. This did not work eighter so I had to press the reset button. After the ...
0
votes
1answer
384 views

Unable to repair ext4 filesystem, getting errors(

I just tried to boot from live CD and checked my file system using fsck,fsck.ext4, no errors was reported/fixed (i.e. says file system is clean), yet when I'm inside of system it tells me something ...
1
vote
2answers
60 views

OEL fresh install while keeping old LogVols

I've been asked to install OEL 5.x on a server and setup a disk with a few directories (there's only one disk in the server). So I have an OEL 5.x server wtih multiple log volumes in a volume group: ...
0
votes
2answers
121 views

Expandable Linux filesystem w/ redundancy & support for different drive sizes?

I did a bit of research already and didn't come across any filesystems so far that have the following features: Expandability, Redundancy, and the ability to utilize the full capacity of different ...
0
votes
1answer
28 views

Expand logical volume by resizing underlying partition

I'm building out a VM image in VMWare/CentOS that will be copied and brought up a multiple boxes. When I initially set it up, I made the disk size too small, but did not realize it until all the ...
3
votes
3answers
666 views

Slow disk I/O in KVM with LVM and md raid5

I have been battling with a kvm setup under debian for two weeks now, specifically with guest I/O disk performance. The system: -Supermicro 1018d-73mtf (X10SL7-F motherboard) -16GB ECC/UB -Intel ...
0
votes
2answers
1k views

Basic iSCSI target setup on Proxmox VE (Debian 7) not working

I have created a Linux LVM partition on my disk and want to share it over network via iSCSI. However, the target is unreachable with iscsiadm (from both local and remote). The setup is shown below. ...
0
votes
2answers
125 views

CentOS LVM: how to resize root lv

I took over a virtual server at work after a co-worker left. He, however, setup the server incorrectly at multiple stages and im cleaning them up as I run into them... Currently I realized that the ...
0
votes
2answers
176 views

Create logical volumes from partitions in linux

I have a server running RHEL with below hard disks configuration. [root@localhost indika]# fdisk -l Disk /dev/sda: 150.3 GB, 150323855360 bytes 255 heads, 63 sectors/track, 18275 cylinders Units = ...
0
votes
1answer
97 views

LVM2: How to copy snapshots?

I read What does an LVM2 Snapshot contain? and LVM Snapshot confusion. What I'm trying to figure out is if there is a way to create a copy of an LVM snapshot for use with different Xen VMs. I know ...
4
votes
2answers
89 views

CentOS partition reporting out of space

I have CentOS server with 7 partitions and 2 of them are LVM partitions one is divided as 2 LVM partitions. While working with the production software the disk suddenly gets full in a folder that is ...
1
vote
1answer
96 views

How to move partitions from 2 LVM volumes into one LVM on other disk?

i had 2 partitions with following layout Disk /dev/xvda: 376.4 GB, 376354897920 bytes 255 heads, 63 sectors/track, 45755 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size ...
0
votes
1answer
327 views

An LVM snapshot of an ext4 fs does not seem very clean

I create an LVM snapshot of a mounted ext4 fs: lvcreate -L 10GiB -s -n "root-snapshot" "/dev/myvgname/root" If I then run e2fsck on /dev/myvgname/root-snapshot, it says: e2fsck 1.42.5 ...
5
votes
2answers
117 views

ZFS Equivalent of lvdisplay snap_percent

I've been using LVM snapshots for backing up MySQL databases. FLUSH TABLES WITH READ LOCK is issued and then lvcreate --snapshot --size 4G etc. Because the database is live while the snapshot is ...
2
votes
1answer
78 views

Creating “Odd” Size Disks in VmWare/Linux

I believe I suffer from "everything must be in powers of 2" syndrome. When asked to create a 30G disk in VmWare for a VM I want to create a 32G disk. If someone needs 256G of storage using LVM I ...
0
votes
1answer
460 views

volume group not showing in /dev , /dev/mapper

We configure cluster with rhcs with storage partition.we created pv and vg. we can see pvdisplay and vgdisplay with all information about pv and vg which we created. But we can not see vg file on ...
2
votes
0answers
153 views

Convert single O/S disk to RAID 1 - Ubuntu 12.04 LTS

I have a server running Ubuntu 12.04 LTS with only a single drive. There are 2 more empty hot swap bays in the chassis. I want to add a little redundancy by adding a RAID 1 to the system. The ...
-5
votes
2answers
339 views

How to convert lvm to ext3/4? [closed]

I have an old box(CentOS 5) that was formatted as lvm but now I want to convert it to ext3/4 file system without losing data. I have some empty disks that can be used, so is there an easy way to do ...
1
vote
0answers
180 views

Volume unreadable in KVM guest after host volume resize

I have a KVM guest requiring more space on one of it's partitions. This partition is actually an LVM volume on the host. So I first unmounted the partition in the guest, switched to the host and ...
1
vote
1answer
4k views

Is it possible to on-line shrink a EXT4 volume with LVM?

Today I tried this on my machine with OpenSUSE 12.3 (kernel 3.7): # resize2fs /dev/mapper/system-srv 2G resize2fs 1.42.6 (21-Sep-2012) Filesystem at /dev/mapper/system-srv is mounted on /srv; on-line ...