I have an MD3000i Dell SAN with dual controllers. Long story short - it managed to muck up some of its own readings on drives and Dell's support told me I could try to shake it loose with a firmware ...
I have a question for an MD3000i SAN expert : We had a RAID with 2 disks on a MD3000i DELL SAN. We deleted the configuration on the storage array without the disks of this RAID configuration plugged ...
We are currently using a md3000i DELL SAN server with a RAID1. I would like to access the information on one disk from a workstation. The hard disk contains 2 LUN but I can only access the first ...
I've been by here as a lurker a few times in the past, and have found it nothing but helpful, now I have a question of my own. I'm charged with creating a VM cluster solution and have been looking ...
We have an MD3000i array accessed by three separate servers (all blade servers accessing through chassis nic's). Controller 1 (both Ports 0 and 1) are linked to Server A. Servers B and C (both with ...
Alright. First and foremost, Warning. This is a bigger-then-normal question. I like to be thorough and try to eliminate all possible "easymode" answers, as well as give everyone a feel of what i've ...
What is the maximum number of servers that can connect to a Dell MD3000i ??