I have a raid5 array on 4 disks, sda1, sdb1, sdd1 and sde1. sdd1 was removed but is a healthy drive. While attempting to re-add it, I accidentally zeroed out the superblock for sdb1. sdb1's data is ...
I'm a bad person and haven't backed up my RAID elsewhere. I now have a RAID10 array that won't assemble, and I'm hopeful I can save it. Here's the details: I have five hard drives set up as RAID10 ...
Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto ...
After troubleshooting problems with my mdadm config and kernel settings for about a week now i got careless and left my data drives plugged in after a successful boot test. i was attempting to change ...
I'm trying to recover whatever data I can from a RAID5 array of a failed NAS. The disks were physically moved to another server that so they could be imaged, but Knoppix "helpfully" detected and ...
Some system details AMD Phenom II X6 1090T, 16GB DDR3 1600 running 11.04 natty, 2.6.38-8-server Raid in question consists of 5 SATA drives; 4 Samsung, 1 Western Digital; 500 GB each Drives are ...
So I've been handed these 2 drives that were part of a RAID0 (eek!) array in a NAS. One of the drives had failed. Turns out, the drive had a bad controller card. What I've done is copied the ...