0
votes
0answers
38 views

smartctl & megaraid: how to find the right device node for an adapter #

I can list physical drives on all megaraid adapters using: megacli -PDList -aALL This will display an adapter # for each adapter, and then list the physical drives attached to them. The ...
0
votes
0answers
69 views

megaraid drives are failing to add and giving invalid parameters error

I am trying to add a couple of RAID 5 arrays to my second adapter. Adapter 0 is two disks in a raid 1 which is running the OS. This seems to be working fine. Attempting to add the second array gives ...
0
votes
1answer
23 views

Is it possible to use megacli to copy from one partition to another?

Except "dd" and "rsync", is it possible to directly use the megacli command to copy one partition to another? I am using h310 raid controller, and it seems not working well using "dd" or "rsync", ...
0
votes
1answer
178 views

How to properly use the the MegaCli command for a LSI Megaraid Secure erase for an SSD?

I tried the following commands but I keep getting a invalid command error. It seems to properly pick up the correct controller, drive slot, and adapter though. I currently don't have a screenshot of ...
0
votes
0answers
43 views

How to monitor CacheCade with MegaCli?

I configured the following virtual device for CacheCade: # MegaCli -LDInfo -L1 -aALL Adapter 0 -- Virtual Drive Information: CacheCade Virtual Drive: 1 (Target Id: 1) Virtual Drive Type : ...
1
vote
1answer
886 views

LSI MegaRAID SAS 9261-8i: Disk isn't recognized after replacement

I've got a Supermicro Server with an LSI MegaRAID SAS 9261-8i Raid Controller inside. There were 3 Disks attached to the controller which were configured as RAID5 array. One of the disks failed ...
1
vote
0answers
220 views

running commands on physical drives on different backplane with megacli

So when I run "MegaCli64 -PDlist -aALL -NoLog | egrep 'Slot|state|Inquiry|Enclosure'" to grab a list of disks and their status. I can see a total of 36 disks. The issue is that they have the same slot ...
0
votes
2answers
359 views

LSI Cachecade Pro 2.0 with RAID10 SSD Cache?

I'm trying to add a RAID10 SSD Cache to a VD by this command: [root@livecd storcli]# ./storcli64 /c0 add vd cachecade type=r10 drives=252:4,252:5,252:6,252:7 assignvds=0 Controller = 0 Status = ...
2
votes
0answers
176 views

MegaCLI / MegaRAID Drive Groups

In the MegaRAID SAS Software User Guide it is stated that a Drive Group includes one or more virtual drives. An excerpt from the document is: "A virtual drive is a partition in a drive group that is ...
0
votes
1answer
143 views

MegaCli: when did a drive fail?

Using MegaCli64, is there a way to find out when a hard disk failed? I.e., /opt/MegaRAID/MegaCli/MegaCli64 -ShowSummary -aALL shows Connector : Int.Ports ...
2
votes
1answer
809 views

Should I enable “Patrol Read” on SSD drives?

LSI, Intel and Dell RAID controllers (perhaps others) have a "Patrol Read" feature to try to spot when a drive is failing before it completely fails. LSI seems to disable patrol read on SSD by ...
2
votes
0answers
1k views

PERC MegaRAID S.M.A.R.T. Status is not matching smartctl's - looking for clues what's wrong with the HDD

I'm getting strange SMART error from MegaCli on Dell R720xd and PERC H710P with five 4Tb SATA drives in RAID5 /opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL gives me some "Failure Seq Event Number" ...
2
votes
1answer
1k views

How to create Raid 10 with megacli

I have OpenFiler storage server. Without installing Windows and MSM, I want to create raid10 array from disks 2 to 21. I have already successfully installed MegaCli to OpenFiler but I'm stuck in ...
0
votes
1answer
492 views

Enabling Temperature Support on LSI MegaRaid Cards

I've got two IBM ServeRAID M5014 SAS/SATA Controller cards in two different machines. One reports drive temperatures, the other does not. I am hopping that it is some type of megacli option that I can ...
0
votes
1answer
566 views

MegaRAID - changing cache policy online

I would like to perform some tests with WriteThrough and WriteBack. Is it safe to change these settings on a production system? The RAID controller doesn't have a BBU so I would like to enable ...
0
votes
1answer
301 views

megacli64.exe manual

Is there any document that explains the command line switches of megacli better than the cryptic output of megacli64 -h ? The machine is an IBM x3650 m3 to which I added three more disks.
3
votes
1answer
806 views

Reset MegaCLI error count

I have a system where MegaCli64 -PdList -a0 shows media errors on one disk. After investigating the errors, I've decided not to take any action for now. I'd like to reset the error count, so that ...