Management Information Base, used in SNMP.

learn more… | top users | synonyms

1
vote
1answer
12 views

Are SNMP MIB's and OID's platform independent?

For example, OID for CPU load for 1 minute is .1.3.6.1.4.1.2021.10.1.3.1 in Linux and Cisco router. But I'm not sure if it is just a coincidence or it is secured over various network devices. I haven'...
0
votes
1answer
30 views

Is there any OIDs standard for NAS in MIB tree?

I'm looking for OIDs for NAS in MIB tree. Is there any standard for that?
2
votes
0answers
47 views

Why is the wrong MIB being used during snmpwalk?

Running snmp walk for the following OID 1.3.6.1.2.1.43.11.1.1.9, which belongs to PRINTER-MIB under prtMarkerSuppliesLevel, is returning SNMPv2-SMI values. I imagine they are correct, but why is the ...
0
votes
0answers
21 views

How to implement snmptrap with custom OID

Is there any way to implement SNMP trap with a custom OID by using snmpd and net-snmp?
1
vote
1answer
150 views

Customize OID of snmp in linux

Iwant to add an custom OID to MIB tree structure. I add the line as below to file /etc/snmp/snmpd.conf extend test1 /bin/echo Hello, world! but I don't know how to specifiy the exact OID ...
0
votes
0answers
9 views

Change MAX-ACCESS value in IP-MIB

I am trying to query IPv4 of agent through SNMP. I see that IP-MIB contains object ipAddressEntry, which as a second value has ipAddressAddr which is exactly what I need. ( http://www.net-snmp.org/...
0
votes
1answer
18 views

SNMP MIB for geographical location

I am writing an SNMP agent and would like to incorporate the node's identifier and/or geographical location into the data. I was wondering if there are standard MIB's for these or even a commonly used ...
0
votes
0answers
68 views

Real time Rssi from Clients from a Cisco WLC

I have a Cisco WLC and different LWAPPs. What I am looking for is a way to be able to get in the WLC the rssi of all connected clients. For the moment I am able to access through SNMP to the ...
2
votes
0answers
161 views

SNMP commands for IBM server

I’m trying to get some data from an IBM server, for example the temperature using the OID .1.3.6.1.4.1.2.3.51.3.1.1.2.1.1 If I run the command: snmpget -O n -v 2c -c public IP .1.3.6.1.4.1.2.3.51.3....
0
votes
0answers
36 views

Typical procedure to identify unknown objects in MIB? (SNMP)

Over the past week or so I've spent time getting to know SNMP. I have quickly learnt that the bane of working with SNMP devices, to create simple monitoring tools, are the MIBs. In my particular ...
2
votes
1answer
30 views

Why would you add MIBs to a device/agent?

I'm currently learning all the SNMP protocols and attempting to put together a script for querying device information, purely all GET queries. I've seen a lot of example questions/scripts where ...
0
votes
0answers
38 views

SNMP - Mib for variable OIDs

Helly everyone, I have a Problem with my Mib for recieving SNMP-Traps. Let's say my relevant OID part is: ...42788.4.6.1. Where 6 is my Client, reaching from 1-32 and 1 is my State (On/Off). For now ...
1
vote
0answers
45 views

Cisco process memory usage

I am trying to monitor a Cisco process memory usage. This is what I get with the command line: show system internal processes memory | inc PID|ipfib PID TTY STAT TIME MAJFLT TRS RSS ...
1
vote
0answers
47 views

Clone/copy definition of MIB leaf into another MIB tree

I have MIB file with definitions of four traps .1.3.6.1.4.1.5591.1.0.0 (SCTE-HMS-COMMON-MIB::hmsColdStart) .1.3.6.1.4.1.5591.1.0.1 (SCTE-HMS-ALARMS-MIB::hmsAlarmEvent) .1.3.6.1.4.1.5591.1.0.2 (...
0
votes
2answers
2k views

How to get/retrive the list of Interface, vlans, port id, and mac address in juniper via snmp?

Below are the following commands I used to get the specific data that I need in a juniper switch. Get Port Id and Interface snmpwalk -r:"switchName" -v:2 -t:10 -c:"*******" -os:"1.3.6.1.2.1.2.2.1.2"...
1
vote
1answer
344 views

(net)SNMP can GET but not SET

I am running OpenWRT (tried all 3 latest versions) in a TP-LINK WDR3600, with snmpd and snmp utils installed. I can get (although MIBs seem missing) but not set OIDs. SNMPGET root@OpenWrt:/# snmpget ...
0
votes
1answer
81 views

Understanding SNMP and the configuration file

I'm trying to get my head around how SNMP works and the configuration files. From my understanding of how SNMP works so far is as follows: * Management Station - this manages the nodes (get/set are ...
1
vote
0answers
3k views

snmpget “No such object available on this agent at this OID”

I have been working on trying to get a value with a custom MIB through SNMP This is my custom MIB: MY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, enterprises ...
4
votes
2answers
226 views

How do I select an OID for my MIB

I've been trying to attach an OID to run a specific script for sometime and at this point I think the culprit is my bad MIB. I've corrected my MIB but I'm curious about the OID i'm trying to use. ...
0
votes
1answer
1k views

Using SNMP to monitor Qnap Volume Usage

I would like to use SNMP to monitor drive usage on a NAS. It's a Qnap TS-859U+. I'm not sure how to use the MIB to my advantage in recognizing the correct OID's to query the right object instance. ...
1
vote
1answer
162 views

How to convert lots of MIBs?

Regarding my latest question on this site; I'm still struggling with adding MIB files to my snmptt server. I have this huge pile of MIBs from both Cisco and Juniper, and snmptt needs handlers for them....
2
votes
1answer
99 views

SNMPTT and MIB files

I have a system setup using SNMPTT to translate incoming traps and put them in a MySQL database. From there, a custom made web application reads out the database and presents the trapt to the user. ...
0
votes
1answer
505 views

net-snmp mib loading and snmptranslate

I'm trying to run snmptranslate on my system but it does not work, even if I did everything by tutorial from net-snmp.org. They say it should work but it doesn't. I have a debian 6 server and net-...
0
votes
0answers
414 views

Is it possible to add/register an MIB for the Windows built-in SNMP service?

I need to build monitoring into an existing .NET application. I will use SNMP to send the application's status to the Windows SNMP service. I have used a .NET library to create the SNMP SET request ...
0
votes
1answer
139 views

Installing new Cisco MIB

I'm having issues exposing firewall information via OIDs on a Cisco IOS device (c7200-ik9s-mz.124-25c.bin). It seems like either the IP-ACCESS-LIST-MIB or the CISCO-ITP-ACL-MIB would supply that ...
0
votes
2answers
164 views

Trouble polling for OID values within tables

I'm very confused about which OIDs are supported by my device, specifically for the CISCO- IPSEC-FLOW-MONITOR-MIB. It seems like some OIDs within that MIB are supported, while other OIDs aren't. ...
-1
votes
1answer
936 views

Translating MIB to OID and a Juniper Switch

2 chained EX 4500 I'd like to monitor using SNMP. http://kb.juniper.net/InfoCenter/index?page=content&id=KB17526 Can anyone please explain how did he translate "jnxOperatingDescr" to "1.3.6.1.4....
-5
votes
1answer
3k views

OID's and MIB's for CISCO, JUNIPER and ZTE Router/ Switch devices [closed]

I want OID's and MIB's for CISCO, JUNIPER and ZTE Router/ Switch devices to monitor CM, PM & FM datas through SNMP. So Please kindly share me the details. Also If you share dumps/files/logs ...
1
vote
1answer
206 views

dell SNMP raid disk no data

I'm trying to monitor data with SNMP for disks in a raid attached to some servers. From what I understand the raid is configured with PERC and PERC does have a MIB associated with it. I've downloaded ...
0
votes
1answer
873 views

How to fetch a cpu status thought net-snmp

I want to fetch a device's cpu and memory status thought net-snmp. I get my device's info with this command: snmpwalk -v 2c -c public 210.38.xxx.xxx system And I got this info: SNMPv2-MIB::...
1
vote
1answer
892 views

Total CPU usage Object ID?

How can i find the correct OID to get the total cpu usage of my Checkpoint (linux) based firewall? with 8 cores CPU. I found this : ssCpuUser .1.3.6.1.4.1.2021.11.9 ssCpuSystem .1.3.6.1.4.1.2021.11....
1
vote
1answer
795 views

Where to download a free MIB complete database

I want to update an MIB database that is exhaustive. oidview is limited so I couldn't finish downloading MIBs per vendor and only Cisco is making its OIDs available for public on ftp. Is there a way ...
1
vote
1answer
93 views

Easy way to add a MIB?

I want to add some tests to a block of remote servers. It looks pretty straightforward to code this using NetSNMP::Agent from Perl. What I'm not clear on is the best way to add the definitions to a (...
2
votes
1answer
4k views

Did not find 'zeroDotZero' in module SNMPv2-SMI

I have a perl script that searches through our switches to find which one hosts a given IP address; this script uses net-snmp libraries to poll through a daisy-chain of ethernet switches (think core / ...
5
votes
2answers
2k views

Which SNMP variables to diagnose/characterise wifi congestion?

I'm preparing for a load test of a classroom wifi system. The pupils all turn on their laptops at the start of the lesson, which launches the web browser and then they start the lesson - which ...
0
votes
1answer
768 views

snmp mib for netapp on debian squeeze

Trying to get cacti drawing graphs on our netapp, I downloaded NETWORK-APPLIANCE-MIB.mib from http://www.oidview.com/mibs/789/NETWORK-APPLIANCE-MIB.html and copied it into /usr/share/mibs/netsnmp/. ...
2
votes
2answers
9k views

Looking for toner level OID for nagios snmp for Brother 9460

I'm setting up an Opsview (nagios) server for monitoring. It's all going fairly swimmingly so far. The most immediate use for the system will be monitoring (or more to the point, alerting me about) ...
4
votes
3answers
32k views

how to get interface traffic snmp information for routers ( cisco, zte, huawei …)?

I have cisco, zte, huawei routers..How can i get the traffic information of every interfaces of these routers. I donot have mib file of zte and huawei. So, i want a generic mib file which can monitor ...
1
vote
2answers
812 views

Cisco Router - Add a missing MIB file

I have a Cisco 881w, and I would like to setup NBAR in my NetFlow Analyzer. But it says that my router misses this MIB in order to allow NFA to poll the router with snmp to get NBAR infos. From the ...
0
votes
1answer
149 views

I have a mib file how can I see the oid for a specific “object”?

I have seen some related questions here but they don't seem to answer my doubt. I have several MIB files I'm reading them using a text editor (know any good free mib reader?) I see the descriptions ...
5
votes
1answer
632 views

SNMP MIB file resource

My company(ISP) has 50+ switch models in our network, we manage them via SNMP from our web based intranet, for some Huawei switches we can't figure out the OID's we need (we usualy figure the OID we ...
2
votes
0answers
354 views

Q-BRIDGE-MIB representation of ports on Dell PowerConnect 6248

I have a Dell PowerEdge 6248 with a 2x10Gb uplink module. I'm trying to make sense of the representation of the ports from the following snmp output: Q-BRIDGE-MIB::dot1qVlanStaticUntaggedPorts.4081 = ...
2
votes
3answers
3k views

3com 4500 switch get some info with SNMP

I have 3com 4500 switch. I can got ram and CPU info with these: 1.3.6.1.4.1.43.45.1.6.1.1.1.3 - 1 Minute CPU AVG 1.3.6.1.4.1.43.45.1.6.1.1.1.4 - 5 Minute CPU AVG 1.3.6.1.4.1.43.45.1.6.1.1.1.2 - 5 ...
2
votes
0answers
437 views

Write a MIB file that defines entire

I am attempting to configure event log monitoring to snmp trap "service" on Windows Server. See: How do I passively monitor the Windows Event Log? & http://www.eric-a-hall.com/articles/20050715....
2
votes
2answers
9k views

Tools to generate a Cacti template from a MIB?

We use Cacti to monitor trends on our servers. Sometimes I get a new appliance or a server, and that appliance comes with a MIB which can be used to monitor the appliance via SNMP. For this example, ...
1
vote
1answer
564 views

SNMP MIB troubleshooting with snmpwalk

I have a MIB file from a vendor for interrogating a specific (and in this case, business-critical) piece of software. When I do an snmptable on the request, I'm getting MAGIC-MIB::queryRtTable: No ...
-1
votes
2answers
288 views

How does SNMP really works? [closed]

How does SNMP gets its information to answer the management station requests ? What is in fact a MIB ? I keep reading about the MIB but nobody says what a MIB is in its practical aspect.
0
votes
1answer
719 views

Possible to get snmpwalk to auto-walk vendor MIBs?

Using net-snmp, I've setup my snmp.conf to see vendor MIBs and I can walk them via "snmpwalk -Cc -v 2c -c <community> <device> <MIB name>". Is it possible to get snmpwalk to auto-...
0
votes
2answers
4k views

How to use a MIB file

I have a HP 2626 switch and want to monitor it by SNMP. how can i use the MIB file. Any starting points on how to understand it ? using snmpwalk to get the data in a *nix machine and output it in a ....
1
vote
1answer
371 views

SNMP: What are Alarm and Alarm Reporting Control Management Information Base (MIB) used for?

I have asked the following questions on StackOverflow, but haven't received a single answer yet, presumably because no one there seems to be knowledgable enough about SNMP and my questions. So, I am ...