1
vote
1answer
66 views

One router and one modem+router. Can I pass a static IP range from one to the other?

I had been running a Huawei HG612 connected to a DD-WRT router for internet services using PPPoE as authentication. Due to an office move, I need to have a DG834 modem+router which will be used for ...
1
vote
2answers
842 views

How can I team or balance two DSL connections? [duplicate]

Possible Duplicate: Is there a sensible way of ‘teaming’ two ADSL connections? WARNING: I am NOT a networking professional (obviously, see below) but I am a programmer and have a decent ...
0
votes
1answer
1k views

What's the best scenario for using a wireless router with Comcast Business Class [closed]

Just had Comcast Business Class internet installed (usage details at bottom of post). During the call to order I asked about the hardware they'd be providing and was told it was a docsis 3 modem that ...
0
votes
1answer
126 views

Connectiong adsl router/modem and router with bridgemode

I have one adsl modem/router which is not "top" of the line and it lack allot of options which I need. I was able to acquire one Cisco router recently which has all options that I need ( like DMZ, ...
1
vote
1answer
100 views

Replacing modem with a vpn router

Can I replace an open network iconnect 624 modem with a cisco router in a small network that needs multiple PPTP VPN connection? iconnect 624 modem doesnt allow multple simultaneous PPTP VPN channels? ...
1
vote
1answer
537 views

Gateway Modem loses ability to DNS lookup intermittently, often under heavy load

We're using a Bell 2Wire Gateway modem/router as our only hub (with some switches attached). Intermittently, but frequently when a large download is initiated, all computers on our LAN lose the ...
0
votes
1answer
132 views

Bridging DSL wifi router to a PacketCable modem [closed]

I used to use a DSL based Internet connection (an AirLive WT-2000ARM). Recently I changed my Internet connection and it is now provided through PacketCable. The provider gave a modem for it (Thomson ...
0
votes
1answer
72 views

WiFi Hotspot Security / Payments [closed]

I'm setting up a local coffee shop network-And we need to display a terms of service / authentication screen before they can connect to internet. Internet --> PC/SERVER --> Wireless Router Then ...
1
vote
1answer
699 views

How to configure public IP behind a modem/router (Actiontec GT724R)

I want to figureout how to use a public IP address (ISP provided) behind the modem/router. I'm replacing an aging modem with a NEW one, which is an actiontec GT724R modem. Its manual is Here This ...
1
vote
2answers
618 views

Port Forwarding not working locally

I have a new Comcast Business Gateway that just replaced my old, perfectly-functional residential modem. I noticed the router I had only had a 10/100 ethernet WAN port but I have a 100mbit connection, ...
0
votes
1answer
194 views

Local sharing between Netgear router and modem

We have 2 internet (Broadband) connection, About connection 1 ADSL modem (Binatone) + Netgear wireless router (Netgear WGR614-v10) ADSL Modem (192.168.1.0) , Wireless router (192.168.2.0) About ...
1
vote
2answers
633 views

Two wireless access points directly connected to modem possible?

I've got the following arrangement set up: Wireless Modem/Router/Switch --> Router 1 (LAN to LAN) Wireless Modem/Router/Switch --> Router 2 (LAN to LAN) with: Wireless Modem/Router/Switch Static ...
0
votes
2answers
950 views

Recommendation for ADSL modem/router that supports multiple servers w. static IPs?

I have what doesn't seem like all that complicated a network in my home: I have a block of 8 (= 5 usable) static IP addresses, which are assigned to five externally-visible servers; I also have a ...
3
votes
3answers
147 views

Number of routers in small community lock up and require reboot

I live in a small town which has one primary ISP. Lately I have noticed that a number of wireless routers have been locking up and requiring a reboot before allowing any connections. This has affected ...
0
votes
1answer
856 views

How to setup tp-link wi-fi adsl router to use internet signal from cable modem (there is no WAN port)

I have TP-LINK TD-8901G router and it has 4 LAN ports, but there is no separated WAN port. Also, I have one CISCO 2100 cable modem. So, how I can setup tp-link to use signal from cisco modem and to ...
4
votes
4answers
836 views

How a router decides destination of packet?

I have a basic networking question. Two PCs are communicating on a WLAN. Both the PCs are behind routers or modems. Both the PCs have the same public IP. That public IP is most of the time is either ...
0
votes
1answer
729 views

Netgear Router/Modem installation PPPoA NAT issues

I am having difficulty getting something that should be simple going. I have a Netgear DM111P modem connection to a broadband connection using PPPoA. Connected to this I have a Netgear FCG318 wireless ...
0
votes
2answers
518 views

Netgear and Port 80

Netgear routers and I are not the best of friends, but we are starting to get along a little better now. The problem started when I first bought the router. I had to work long hours back then so my ...
0
votes
2answers
725 views

Setting up a Cisco router for dial in access

Our MPLS provider needs our routers to be setup with modems so that they can dial in and make config changes when necessary. I have connected the modem to the router (Cisco 2600) via the aux port. ...
1
vote
1answer
202 views

Modem with support for wired 802.1x

I'm looking at allowing internet access for only a few scattered users on a school network. One method I'm considering is using 802.1x authentication for the modem. Of course there are simpler options ...
1
vote
1answer
4k views

Port forwarding with multiple IP's

I work at a company which uses a Fortigate 60 router, something I'm not really familiar with. Everything worked fine with it until a week ago when Comcast came in and replaced our modem. It seemed as ...
0
votes
1answer
950 views

Intermittent disconnect: which needs replacing, the router or the modem?

We have a WatchGuard SOHO 6 with the latest firmware (6.4.1) and an ISP-supplied DSL modem. The firebox's PPPoE settings look like this: We've been having a problem lately where our internet ...
1
vote
1answer
2k views

Linksys WRT160NL & ADSL modem/router - WAN port

I have a router/modem at ip 192.168.1.254. I also have a linksys router connected to the modem through the LAN port. So right now I have this: 192.168.1.254 <----> 192.168.1.1 <----> PCs ...
2
votes
2answers
268 views

Modem/router that can handle 50+ clients

I have a network of 50+ PCs, with a Dynalink RTA 1320 for internet access, and have issues with internet speed. The Dynalink connects with a PPPoA connection. Only about 20 actually have internet ...
12
votes
3answers
9k views

What's the difference between a switch, a router, and a modem?

What's the difference between a switch, a router, and a modem?