I am having some issues setting up the WAN side of pfSense. I have ordered a dedicated box through a hosting service with ESXi loaded on it. Along with that I have 3 public IP addresses that will ...
To try to find the inside local address of a host, on a LAN with 1 Cisco wireless router, I run nping on one Windows7 host 192.168.1.138. C:\>nping --ec "public" -c 1 echo.nmap.org SENT ...
We are about to hire some consultants to help us set up an AWS-based server environment that will enable us to handle NAT Traversal for our P2P application. One important part of the NAT Traversal ...
I'm looking at setting up a DMZ behind a Cisco ASA that will contain a large number of HTTP front-end load balancers and SSL offload services - over 100 IPs, concentrated on a smaller number of hosts. ...
I have a Windows Server which has ~10 IP addresses statically bound. The problem is I don't know how to specify the default IP address. Sometimes when I assign a new address to the NIC, the default ...
When my cellphone accesses a website via the tower and its GPRS gateway, NAT ensures that the sites receive a public IP. Would all phones using a single tower have the same IP? If yes, then how can ...