0
votes
1answer
45 views

Same routes under VPN - how to workaround?

I only have basic experience with VPNs (mostly OpenVPN) and mostly theoric, but now I want to set up something more complex and I am evaluating the possible issues that I may face. I will try to ...
0
votes
1answer
21 views

How to connect remote client software over VPN to DVR

Junior sysadmin here: I would like to enable a remote user to view security camera footage on DVR using its client software installed on the remote machine. Software is Nuvico CMS Lite, DVR is also ...
0
votes
0answers
11 views

Netgear VPN can't access specific server

I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect ...
0
votes
1answer
24 views

How to set up vpn tunnel (ipsec) connection

I'm working with a client who wants to set up a vpn tunnel between their network and ours. They're in charge of the tunnel and to give us the access they are asking me my public IP and my LAN IP. ...
0
votes
0answers
24 views

Routing all network traffic through a VPN for VOIP purposes

We have recently moved offices and as we are in a rural area there is no broadband, but there is a strong 4G signal. Problem I have is that our VOIP phones are not allowed to pass through the 4G ...
0
votes
1answer
49 views

Config OpenVPN on Window Server 2008 R2 for client can connect server's Lan network

I installed openvpn 2.1 on my Windows Server 2008 R2. My server has 2 network adapter. The first adapter connect to internet. (default gateway here) The second adapter connect to lan network. ip ...
0
votes
0answers
34 views

Dante - Socks Server - Not Working over Tun0 Interface

I'm trying to set up a socks proxy, so I can bind a port to my vpn interface. However, I cant' seem to get it to work and I'm not sure why. I don't have much experience with this.. Config: ...
0
votes
2answers
93 views

Gateway gets stripped from DHCP Reply through OpenVPN tunnel

I have a bridged OpenVPN setup. This is my server config: port 1194 proto udp dev tap0 ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key ...
0
votes
0answers
29 views

Amazon VPN connection

I am using a netgear FVS336GV2 firewall and I have a comcast business router in front of it. After numerous phone calls with amazon support I have not been able to establish a vpn connection. I am ...
0
votes
1answer
40 views

WatchGuard XTM510, Dialed in VPN (PPTP) users cant Ping hosted datacentre machine on BOVPN

we have a BOVPN from our network 192.168.1.0/24 range to some hosted environments at a datacentre. 172.15.0.1/20 any machine on our internal network ranges can communicate with the systems at the ...
0
votes
0answers
55 views

OpenVPN Linux Client does not bring up tap0 interface

I have an OpenVPN client on Linux connecting to an OpenVPN server. The server assigns IPs via DHCP, thus I connect using the tap interface rather than the tun interface. OpenVPN connects, ...
4
votes
2answers
169 views

TCP connection through IPSec (Linux/Strongswan) stalls after exceeding PMTU

The backups (via Bacula) of one of my servers (“A”) connected via IPSec (Strongswan on Debian testing) to a storage daemon (“B”) don't finish 95% of the times they run. What apparently happens, is: ...
0
votes
1answer
20 views

Use local Internet connection

I have a network split into through two ethernet segments through a virtual VPN hub. In the figure, blue is the part of the network that I control. My problem is due to the orange subnetwork, that ...
0
votes
0answers
31 views

Aggregate two pptp connection ubuntu

I used pptp client to create two pptp VPN connection ppp0 and ppp1. I would like to aggregate these two connections (in round-robin style). I tried bonding , but it seems that it only work for two ...
0
votes
0answers
28 views

Private, secure network between web nodes

I need to create small network of vps (linux) servers. Their main puropse is to server some data over http to clients. Each server is going to be located elsewhere in the world. I want those servers ...
1
vote
0answers
32 views

Cisco RV016 dual WAN and VPN setup

I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ...
1
vote
1answer
109 views

Connecting Small business network to Azure Site to Site VPN

Would like to have connectivity between azure virtual machines and on LAN users. My current network has a Cisco ISA550 connected to the WAN (one Ethernet cable into the office the fiber transceiver ...
0
votes
1answer
256 views

Mangling traffic from a Mikrotik Router

I have a MikroTik powered Router in the house with a couple of internet connections (2 200/10Mb Cable modems and a 100/20Mb VDSL Line). I am using Mangle rules to set routing marks and NAT rules to do ...
1
vote
1answer
167 views

How to stabilish a VPN connection, only on port 8080

Infrastructure: Here's what I want, be able to connect to the website 10.10.100.32:8080 from my LAN on 'Router 1', and all the traffic outside the port 8080 should go to the default gateway 'Router ...
1
vote
2answers
42 views

Setting up a VPN in a Network with Various Restrictions

I work for a Social Welfare Center in Greece, that consists of 5 separate institutions, located on a radius of roughly 150 km. 4 of those are effectively connected through Syzefxis which is a national ...
1
vote
2answers
85 views

Give internal access to external client

I am newbie in the networking issues. I got a question for which I don’t know how to solve. I have my internal network that has a fixed IP (only accessed by VPN) and I have a server where I put some ...
0
votes
1answer
36 views

How can I use hardware VPN connections from the cloud?

We currently host our servers in a typical hosting environment. We connect to several third parties via VPN connections. Each third party stipulates what VPN devices we can use to connect to their ...
0
votes
1answer
174 views

How to surf the internet using static IP using SSL VPN [closed]

I have a Fortinet 60D device which configured to use SSL VPN this appliance connect to ADSL router with WAN interface and to my Radius server on LAN interface. The problem is when I go out to the ...
0
votes
1answer
122 views

vpnc client ( open source ) that can connect to checkpoint gateway

I am searching for a long time a vpnc client ( open source ) that can connect to checkpoint gateway ( firewall ) Until now without any results I need vpn / vpnc client for Linux machine ( no matter ...
0
votes
0answers
46 views

OpenVPN Server & Two Gateways

I have a network setup as follows: Internet <---> Firewall <---> VPN (1) VPN <---> NAT (2) Internet <---> Firewall <---> NAT (3) (I don't have the reputation to post the picture :/) ...
4
votes
1answer
222 views

High throughput meshed VPN to connect datacenter hosts

We're renting a number of hosts in a public datacenter. The datacenter does not offer private VLANs; all hosts receive one (or more) public IPv4/IPv6 addresses. The hosts come with very modern CPUs ...
0
votes
0answers
105 views

Routing through SonicWALL SSL-VPN and Cisco L3 Switch

In the image above, we use the SonicWALL NSA 3500 at our gateway and handle VPN with its SSL-VPN. Our Layer 3 Cisco switch is our core network switch and handles about a dozen VLANs. Most VLANs ...
0
votes
1answer
119 views

Network remapping with iptables and PPTP VPN

I have two different networks: Home network 192.168.1.0/24 A - Home PC (192.168.1.100) B - Home Router (192.168.1.1 lan ip - x.x.x.x public ip) Office network 192.168.1.0/24 C - File Server ...
3
votes
4answers
102 views

Tunnel over HTTP Server [closed]

As you know, in many countries censorships are prevents us to reach some sites. In Turkey, there will be censorships on Facebook and Youtube. I thought It will be great to pass these censorships ...
2
votes
1answer
97 views

Create a 4 nodes peer to peer VPN

Is there a way to create a peer to peer virtual private between a small number of nodes (4) where every packet goes directly to its destination ? Every node would have a public address and will be ...
0
votes
3answers
57 views

Acces VPN over Windows network management instead of OpenVPN client

I am running openVPN on my Linux server and use openVPN Windows client to connect to it - everything is working fine. Now I was wondering if I can setup the VPN connection through Windows' network ...
0
votes
0answers
57 views

PPTP server with multiple IP addresses does not let clients through

I have set up the pptpd server on a Debian 6 server. This server has multiple IP addresses where IP1 is the default eth0 interface IP and IP2 is the IP configured to eth0:0. On connecting to the ...
0
votes
1answer
77 views

Openvpn make computer on local network accessible

I'm trying to make computes on local network accessible for VPN clients. My server is available on 10.0.2.1 from VPN but I can't connect to other computers on local network of the server. How can I do ...
0
votes
1answer
97 views

EAP password prompt in strongSwan

I'm trying to setup a host-host configuration using strongSwan. I did manage to set it up using certificates and now I wish to set it up using certificates + EAP authentication. I mixed this ...
2
votes
3answers
2k views

OpenVPN and Routing and IPtables

GOAL: Access internal network devices and browse web via the tunnel. 192.168.2.x = internal network 192.168.3.x = openvpn server 192.168.2.111 = openvpn server on internal network [root@openvpn ~]# ...
0
votes
1answer
253 views

How to route traffic only to specific hosts using sshuttle?

I'm currently using sshuttle to access some VPN-restricted resources, the vanilla version of "route everything" works fine but I'd like to know how to use it to route only traffic to those servers. I ...
3
votes
2answers
126 views

OpenVPN Configuration Setup

I have a CentOS 6.64bit machine that I installed OpenVPN on. I want to have OpenVPN setup internally as a VPN to replace QuickVPN(it's horrible, fragile and randomly will work on Windows 8.x and not ...
0
votes
0answers
61 views

Need help troubleshooting QuickVPN hang

have QuickVPN 1.4.0.5 on XP Pro SP3 and am trying to connect to a RVS4000 using its public IP address. QuickVPN gets to "Connecting..." and hangs. The context menu on the systray icon won't come ...
0
votes
0answers
51 views

Preventing SSH to use VPN

I use a VPN service on my Debian server which I connect to remotely using SSH. The problem I'm facing is that when I connect to the VPN on the server I get disconnected from SSH since the server's IP ...
-1
votes
1answer
62 views

IPsec VPN Server behind Cisco ASA (Transparent mode)

I've a Cisco ASA 5510 with transparent mode, and I'm going to setup a IPsec VPN(Openswan) in a internal linux server(with Public IP). This server has 2 NIC, 1 public IP, and 1 internal IP. I've ...
1
vote
1answer
128 views

Redundant OpenVPN tunnel

I'm trying to set up a fully redundant OpenVPN tunnel, with two routers on each side. All the tutorials I saw (such as ...
1
vote
0answers
74 views

Pass a traffic from a specific domain through OpenVPN

I want to pass traffic from a specific domain through openvpn (tun0) and the rest through eth0 How can I configure openvpn to work with eth0? the domain name is set with ddclient to update dynamic ...
0
votes
2answers
193 views

How to make httpd accessible only through the VPN?

I have a server running PPTP that is supposed to run an httpd (nginx) accessible only through the VPN. I'm also running a few other httpds too, which are not supposed to work on the VPN. routing ...
0
votes
0answers
30 views

How to make httpd accessible only through the VPN?

I have a server running PPTP that is supposed to run an httpd (nginx) accessible only through the VPN. I'm also running a few other httpds too, which are not supposed to work on the VPN. routing ...
2
votes
1answer
148 views

Debug: Cisco VPN Router runs 100% CPU

I've turned logging on and all I am currently getting are Debug/Kernel logs. Nothing above debug. This was also during offsite hours when hardly any traffic was going on. I have also upgraded to the ...
6
votes
1answer
350 views

Cisco QuickVPN Can't view local computers

I am connected to my QuickVPN connection to my RV180 VPN Router and I can access the router via IP but I can't find or see any of the computers. How can I fix that? Do I need to do some more advanced ...
2
votes
1answer
52 views

How to automatically rewrite response records obtained using recursion in BIND?

I'm using Bind 9.9.4 on a hypervisor (lets call the hypervisor A) for VMs. The hypervisor has a VPN connection to a different host (lets call it B), which also has a public IP. The bind on hypervisor ...
1
vote
0answers
263 views

Sonicwall NSA 2400 Not switching back to Primary VPN after Failover

We are experiencing an issue with our SonicWall NSA 2400 Firewall. We have a secondary gateway over IPSec setup in the event of a failure of our main ISP (which is unfortunately common). The ...
1
vote
1answer
54 views

Understanding VPN Implementation

The above image shows what I think occurs during an OpenVPN connection. Hosts A and B are connected to the VPN through the VPN server at 1.2.3.4:1194. My question is: if host A wishes to send a ...
0
votes
0answers
33 views

openVPN as a way to connect to a LAN by another client, different from server

Setup: one LAN handled by a router without a publicly available IP address but without any outbound connection restrictions ("target LAN"); a separate server publicly reachable from the Internet ...