Networking refers to the technologies and techniques that enable the interconnection of devices and applications allowing them to communicate electronically.

learn more… | top users | synonyms (1)

1
vote
0answers
80 views

Routing with multiple NICs on debian

I have a machine with two NICs on different network segments, I've set up routing for the different segments. It works if I run all the routing commands manually, but I can't get it to work when ...
1
vote
0answers
29 views

Split TCP packet - Data layer vs IPv4Layer

What is the different between split TCP packet in the Data layer compare to split the packet in IPv4Layer ?
1
vote
0answers
18 views

Force the GPL/PV driver to a lower link speed

I'm running Xen 4.4.0 on Ubuntu 14.04. On this Dom0 I am running: 1 DomU Ubuntu 14.04 with Shorewall 1 DomU Windows Web Server 2008 R2 with GPL/PV drivers Both domUs connect to the same bridge ...
1
vote
0answers
137 views

Unable Join SOME 64 bit Windows 8.1 Pro Clients to Windows Sever 2003 Domain

We just deployed 12 brand new Windows 8.1 Pro 64 bit client machines. They are all identical models and all wired identically to our network/server room. 8 of the machines joined the domain with no ...
1
vote
0answers
62 views

Bridging two datacenters

i need to find out what would be best way to bridge current datecenter with new DR datacenter. I have following network configuration (show in picture). http://i.imgur.com/7bohb3I.jpg So on internal ...
1
vote
0answers
155 views

How to create openvpn tunnel between multiple interfaces between two hosts ubuntu linux

I want to create OpenVPN tunnel between two Ubuntu 12.10 hosts which has two interfaces, say: Host1: eth0, eth1 Host2: eth0, eth1 A tunnel is wanted between: Host1 (eth0) <-> Host 2 (eth0) ...
1
vote
0answers
118 views

Linux tun interface packet routing

I have questions on the ip packet flow for the following scenario. The scenario is : A tun0 (10.0.0.2/8) interface and a physical wireless lan card wlan0 (ip address not fix) on the client side, ...
1
vote
0answers
48 views

how multicast stream passes when receiving locally

If suppose I have TX application which transmits UDP multicast to 239.0.0.1:1234. And I have RX application which joins multicast (239.0.0.1:1234), and receives this multicast (239.0.0.1:1234). I ...
1
vote
0answers
106 views

linux not replying to an arp request

I am running linux 3.14 on a system with 2 interfaces. on the first interface, i can access our local network. on the second interface, arp packets come in but linux doesn't send out reply. is it ...
1
vote
0answers
88 views

openvpn rdp networking mystery : can connect HTTP cannot RDP, even with firewall off

I have 2 small networks joined using OpenVpn (routed configuration), lets call them A and B. on A, I have a test web server (IIS, Windows 2008R2 or Windows 2012 depending on test machine), lets call ...
1
vote
0answers
65 views

DFSR speed Server 2008r2

So, here’s the simple setup: 2 sites, each with their own file server (server standard 2008r2 fully updated) 100MB WAN link at each site 1.7TB shared drive Replication schedule 64Mbps at night and ...
1
vote
0answers
36 views

VMs with same name an IP

Does Foreman support managing several VMs with same name and IPs, but with different certname? for example: NAME IP CertName VMLinux001 10.0.0.2 VMLinux001@domain.com ...
1
vote
0answers
147 views

amazon ec2 instance going to a remote ip using openswan tunnel is up but no traffic being established on the remote ip

I having establishing a vpn tunnel to a remote peer/public ip using amazon ec2 openswan. The tunnel is up but no traffic has been seen on our side or the remote side? Is there I been missing? Please ...
1
vote
0answers
144 views

Route traffic for a specific IP through a specific interface

I'm setting up a server that tunnels all its traffic over an OpenVPN connection. The VPN connection is further tunnelled over obfsproxy hosted on the same machine. The problem is that as soon as the ...
1
vote
0answers
463 views

Ping connected Clients to VPN tunnel PPTP

I have set up a vpn server on CentOS 6 (PPTP) following this guide... Server End ifconfig ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.15 P-t-P:192.168.1.200 ...
1
vote
0answers
56 views

Why does my server gets requests for domains that are not mapped to my IP

As title states ... Why does my server (nginx) gets requests for domains that are not mapped to my IP? I've split my nginx logs to create a log file for each website that it processes and i've ...
1
vote
0answers
33 views

VM LAB - Promiscuous mode clarification

So for clarification I am running a Lab within VMware behind OpenVPN, 1 NIC with direct internet access (WAN vswitch) and another NIC with a leg inside a LAN vswitch. (This obviously houses my VM's ...
1
vote
0answers
45 views

Xen VM could not be installed

I have rented a server from Hetzner. I have installed Xen on Dom 0 - Centos 6.5. I couldn't create a Dom1 Centos 6.5 VM. The Error I see is 'Unable to retrieve 'the link for centos image' while ...
1
vote
0answers
64 views

Dell PE2900 seeing only 1/2 ethernet controller

I have 2 ethernet controller on my dell poweredge 2900 : http://www.dell.com/downloads/emea/products/pedge/en/pe2900_Spec_Sheet_Quad.pdf But I only see one on my linux system : $ ip addr 1: lo: ...
1
vote
0answers
371 views

How to create a link between GNS3 and a VMWare Workstation VM that is totally isolated from the physical host?

My physical host machine runs windows server 2012 R2 with a DHCP server. I have the following topology in GNS3: Windows Server is the physical machine, it is connected to both VMNet 2 and VMNet 3 ...
1
vote
0answers
199 views

Hyper-V VMs keep losing network connection

We had a major power loss in our server room two days ago and several Cisco Nexus 2232PP FEX devices went down. We were able to get everything back online, but since that event we've been experiencing ...
1
vote
0answers
72 views

Redirect Default Gateway Traffic in Linux to File

I am trying to troubleshoot one of my linux servers (ubuntu server). Therefore I want to intercept all traffic that is sent to the default gateway and then write it to a file: preferably some kind of ...
1
vote
0answers
86 views

Receive many UDP packets & ksoftirqd load

I want my server to be able to handle more than 1Mpps from a 10g card. Is it possible? I have Ubuntu 14.04 with kernel 3.11 and a 16 core Xeon machine. It seems that ksoftirqd becomes bottleneck in ...
1
vote
0answers
118 views

Load Balancing over multiple ISP connections

I have been trying to implement load balance and fail over on a linux machine having multiple interfaces. Currently I am using two ISP lines and I wish to split the network traffic such that both of ...
1
vote
0answers
89 views

Using a G. 655 with a G. 652.D fiber cable?

Is it possible to use a G.652.D patch cord with a G.655 fiber cable for just a small distance (less than 10 m) for the interconnect only (from the patch panel to the switch) ? If yes or no, what will ...
1
vote
0answers
84 views

two different ping results to the same machine, what does this mean?

I am trying to track down a network or possibly server issue, and I opened a ping to the server from my machine. I will generally receive a <1ms response for a period of time, say 10+ minutes. ...
1
vote
0answers
41 views

Most secure way to encrypt critical data to be shared, edited and seen (must ALWAYS be secure)

This question does not rely on time... so it's not about keeping data on tape or anything similar. I have 3 distinct PCs with critical information. PCs are running Windows OS. They all hold critical ...
1
vote
0answers
713 views

How to access the setup wizard on Sonicwall TZ 100 firewall

I am trying to setup a TZ 100 firewall. I am following these instructions and I have attempted to follow these instructions: "Connect your computer to the LAN (X0) port on the SonicWALL. Connect an ...
1
vote
0answers
109 views

TCP Window Size Allocation, TCP Window Zero Errors and Network Latency

My mind is about to explode as everyone is always blaming the network guys for disconnections and slowness in the networks, but Solarwinds Reports that all utilization in the network devices and links ...
1
vote
0answers
198 views

Using my IPs on OVH server via GRE

I can't route my IPs into a OVH server, can you help me to find the problem? Mikrotik GRE IP: 192.168.55.10 OVH Server GRE IP: 192.168.55.20 GRE iface name: ali1_fr1-ovz1 IP to route from Mikrotik to ...
1
vote
0answers
173 views

How to setup multiple OpenVPN connections on a server for a single localhost app to use on CentOS 6.5?

I have a scenario where I need to run several OpenVPN connections at one time and to allow a singular application to access each of these connections. How wold I go about starting up several ...
1
vote
0answers
1k views

TPROXY Not working with HAProxy, Ubuntu 14.04

I'm trying to use HAProxy as a fully transparent proxy using TPROXY in Ubuntu 14.04. HAProxy will be setup on the first server with eth0 111.111.250.250 and eth1 10.111.128.134. The single balanced ...
1
vote
0answers
50 views

Measuring latency with switch and identifying flow path

I have two machines, A and B, connected via switch S1(master) and s2(slave). I want to measure latency and identify packet flow path from machine A to Switch,switch to machine B. If the link between ...
1
vote
0answers
958 views

Ubuntu 14.04 KVM Host - Only network device pcnet working

I've installed a KVM host on Ubuntu 14.04. I've added a networking bridge as br0 and also added the p4p1 network adapter to it. My problem is now that only the "pcnet" networking guest driver is ...
1
vote
0answers
267 views

Network Performance / SMB-CIFS / Guidance

I'm an IT professional working out of my home office. I'm having some performance problems (NAS file copies) which I'm trying to isolate, using iperf. My question is on iperf. Infrastructure - ...
1
vote
0answers
592 views

Route two public (ISP assigned) subnets on 'outside' interface of Cisco ASA 5510

We've got a Cisco ASA 5510 that sits on our edge and acts as the PPPoE endpoint for a fibre connection. The fibre connection came with a static IP, which is assigned via PPPoE, and gets picked up by ...
1
vote
0answers
146 views

trying to reach a port forwarded server from the subnet using the public IP not working

I set up a server which is connected to my router. The router forwards a port of my server. So when I scan that port using http://www.t1shopper.com/tools/port-scan/ I got: 188.143.126.14 is ...
1
vote
0answers
98 views

Binding ISC DHCPD to a virtual (heartbeat) interface

I had a DHCP server that acted as a relay endpoint and worked fine. let's say this is a solo machine with eth0 with an ip of 192.168.0.10 I needed to bring this server down and join it to a cluster, ...
1
vote
0answers
37 views

Adding old T1s to a new configuration

As embarrassing as it is, my facility is running on two T1 lines. One connects us to AT&T and the other connects us directly to our corporate facility. This is a mirror of an old system we once ...
1
vote
0answers
114 views

HP ConnectX cards identifying as ConnectX EN

I bought a lot of four HP branded ConnectX card on Ebay. The cards are : HP InfiniBand 4X DDR ConnectX PCI-E Gen2 Dual-Port HCA 483514-B2 My problem is that two out of four cards identify themselves ...
1
vote
0answers
1k views

upstream timed out (110: Connection timed out) while connecting to upstream

I have my backend in France and one of my frontend servers is in Japan. This issue doesn't happen with any other of my frontends, only this Japan server, which already has about 2s latency from most ...
1
vote
0answers
169 views

Redundant Debian Gateway

I have to configure a redundant gateway with Debian boxes and I would like to get some recommendation what's the best solution in my case. There are certain limitations in my setup and I have to go ...
1
vote
0answers
60 views

How to view network resources used by a thread in Linux

I am trying to check the network resources used by a thread but unable to figure out how. lsof only allows us to give the pid. I checked under /proc/pid/task/thread/ but could not find anything ...
1
vote
0answers
341 views

Network share folder not accessible on one machine

I have a network file share folder available from one server on the network (running Zentyal 3.4/Ubuntu 13.10). I can access that shared folder from all of the computers on the network, except for ...
1
vote
0answers
85 views

Aggregate two pptp connection ubuntu

I used pptp client to create two pptp VPN connection ppp0 and ppp1. I would like to aggregate these two connections (in round-robin style). I tried bonding , but it seems that it only work for two ...
1
vote
0answers
66 views

Cisco RV016 dual WAN and VPN setup

I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ...
1
vote
0answers
136 views

WSUS is not using Akamai CDN for syncronisation source

I've just installed a WSUS onto our network, and I'm currently doing the initial sync. I've found that WSUS does not seem to be talking to an Akamai cache, but rather with MS directly. This is ...
1
vote
0answers
120 views

cannot reach munin port on other AWS instance

2 AWS instances, in the same region but different availability zones, one is in regular EC2 and the other is in VPC, both have an Elastic IP, both are 64bit Amazon Linux AMI 2014.03.1. Both are ...
1
vote
0answers
75 views

All nework interfaces hang for seconds while one interface goes up/down

I am building a client/server application that uses several network interfaces in parallel for redundancy, and I have noticed that while one network interface goes down or goes up, the communication ...
1
vote
0answers
306 views

Make other VMs show in Network on windows server in Azure

I'm deploying a desktop app that connects to a remote database. standard 2-tier setup, but it's not a web app. People will log in via RemoteApp. But I'm having trouble getting the app instances in ...