1
vote
1answer
31 views

Macvlan-interface and PPP-session

I need to pick up two PPP-sessions on the same interface with different MAC-addresses (on some device with openWrt). I decided to check macvlans. I created an interface with another MAC-address. ...
1
vote
1answer
29 views

Enable external SSH traffic on selected workstations within my network

I have already enabled an external SSH connection (with public and private keys) to my router, however... I would also like to enable an ssh connection to one of my internal workstations (permanently ...
0
votes
1answer
232 views

how to use iptables to block the IP of device connected to openwrt router

I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the ...
0
votes
1answer
59 views

Is it possible to restrict the connection duration per client on the router (say with OpenWRT)?

How to limit the connection duration per client per period (say, one MAC-address can connect only for 3 hours per week to the network). Where could be defined such a rule? In the firewall? So the ...
0
votes
1answer
399 views

PRIO qdisc example not working

I have a TP-Link WR1043-ND with OpenWrt 12.09 (r36088, Linux 3.3.8). There is a bridge called br-lan joining eth0.1 (tagged VLAN for the 4 LAN ports) and wlan0 (Wi-Fi). There is also the WAN port at ...
1
vote
2answers
669 views

Openwrt two nic on the same vlan instead of alias?

I have a TP-Link WR1043ND with 1 wan and 1 lan cables attached. The lan cable currently have 2 ips of two different network, using an alias. The two networks share the same switch. I'd like the ...
0
votes
2answers
2k views

Route an IP from WAN to a host on LAN on OpenWRT

EDIT: I know how to use NAT, I specifically want the server to be reachable on two IP's, one private, one public, with the firewall of the OpenWRT in between, if feasible. At the office we have ...
1
vote
0answers
626 views

OpenWRT with VLANs: NAT not working with single Firewall Rule

I have a configuration on my OpenWrt Backfire 10.03 with different VLANs, k2 belonging to fwz2 is one of them. In this testing environment the WAN is DHCP with IP:192.168.1.1: config 'interface' ...
0
votes
5answers
2k views

Wireless clients have no route to ethernet clients in OpenWrt router

I'm using OpenWrt Kamikaze 8.09 on a Linksys WRT54g v1.1 router. I just flashed it with default settings and got everything working, except my wireless laptop cannot ping my desktop which is wired to ...