I'm on linux mint. I've just installed a PCIe gigabit network card (from eBay!) into my linux machine. I've already had to follow this guy's instructions to get the onboard NIC working correctly. I ...
I have a server running OpenSuse with a 10Gbe card (Intel 82599eb) and the driver is installed and it is working correctly. I need to move the card to another slot. However, when I do so, the card ...
I have a motherboard with only one x16 PCIe slot and no x8 slots. I am buying a NIC with very specific configuration, but it is available for x8 slots only. Can I plug a x8 card in a x16 slot? I have ...
I have a Fujitsu Primergy TX100 S2 server and I want to add more network cards. The only PCI slot is already occupied with a NIC. I have available one PCI Express x4 slot and two PCI Express x8 slots. ...
I have a Dell PowerEdge R610 system sitting in a co-location facility. It has four onboard NICs and a 2-port PCIe NIC in one of the slots. I'm usually working with HP servers, so I have the ability to ...
I have PCIe x4 NIC plugged into PCIe x16 slot. I have read, that even though it should run in x4 mode, it's not guaranteed: the network card can run in backward compatibility 1x mode. How to verify ...
Is it possible to plug in PCIe x4 NIC into PCIe x16 slot?