1
vote
0answers
48 views

Setting up a web server behind a ZTE NAT [closed]

down vote favorite I have developed a web app in Java using netbeans and running on a glassfish server attached to netbeans. I would like to show this to some people but I can't get it running across ...
0
votes
1answer
57 views

Port Forwarding From Second Router

I have the following setup at work, of which I'm impromptu in charge of: Internet(Modem) <-> Smoothwall (firewall/dhcp/nat) <-> Servers/PCs I need to be able to add a second broadband line in, ...
1
vote
1answer
93 views

Automatically ask router for port redirection on ubuntu

Is there a way to use uPnp or something to automatically ask a router/firewall to redirect data coming from outside to a machine running ubuntu? Here's the deal, I'm supposed to prepare a certain ...
0
votes
1answer
103 views

Port forwarding doesn't work internally

I've got a machine configured to run a webserver on port 8080. That's all the machine is required to do, but it is possible that the website will be visited by the machine it's self (inside the ...
0
votes
3answers
65 views

Can I set up port forwarding to emulate not just a port but another IP address?

I am running a proprietary Windows application which functions like a server. You install the program, and then it broadcasts itself over port 13083. The program is web-based, so it's accessed ...
0
votes
2answers
784 views

cisco ip nat / port forwarding

I have been trying to get port forwarding working with a newly installed cisco router. I cannot seem to find where my fault is and have been looking for quite a while. The relevant section of my ...
0
votes
1answer
613 views

Port forwarding behaves differently from virtual server in D-Link router?

There are two pages in D-Link router to setup access to internal network from outside: Port Forwarding and Virtual Server. Both allows to map external port to internal one, except latter page also ...
1
vote
0answers
278 views

NAT loopback/reflection on Zyxel P-661HW-D1 doesn't work

I have a Zyxel P-661HW-D1 modem/router with several port forwards that works on the WAN interface. I'd like to make them work for the LAN interface as well, like I'm used to. I updated the firmware to ...
2
votes
1answer
289 views

Port-forwarding with Authentication

Okay, so here's the story: I administrate a server running a web application on my internal LAN, say foo:1234. My team uses this actively. We have now decided to make this application accessible ...
0
votes
1answer
422 views

iis 7.5 site not reachable through external ip adress from router

I'm hosting a test site under iis 7.5 on windows server 2008 r2. The firewall is deactivated and my router (fritz!box) has a rule to forward the port 3130 to my test server. The test site is ...
-4
votes
2answers
100 views

How to access an IP address as if on a different network using SSH [closed]

In preparation for a lengthy business trip, I set up my router such that I can access my home computer over the internet via port forwarding over SSH. One thing I neglected to do was setup access to ...
0
votes
2answers
554 views

SSH not working through Double NAT

I am trying to setup port forwarding for ssh through 2 NATs The first Router translates my internet IP to my outer network (10.1.7.0). In the outer network there's a second Router that does NAT to my ...
0
votes
1answer
175 views

Browsing my website from proxy sites works but not from my own machine

I just setup my IIS to be accessible from web to be some IP : XXX.XXX.XXX.XXX. It works nicely when I visit from proxy sites like hidemyass.com. However, when I visit my website from my machine ...
1
vote
3answers
306 views

What are some ports that are essentially “never” used (super rare port ranges) [closed]

I want to set my port forwarding routes far far away from the normal ports which my computer uses. I asked this question on Google and nothing like it came up, so, here I am. (this is a subjective ...
-1
votes
2answers
2k views

Destination NAT Onto the Same Network from internal clients

I have a DSL router which acts as NAT (SNAT & DNAT). I have setup a server on internal network (10.0.0.2 at port 43201). DSL router was configured to "port forward" (or DNAT) all incoming ...
2
votes
3answers
15k views

How do I get IIS working and accessible outside my network behind a router? [closed]

My machine is running Windows 7 Ultimate. Here's what I've done (successfully) so far: Installed IIS 7.5 with PHP over FastCGI Got it working! When I go to http://localhost/index.php , my PHP ...
1
vote
1answer
6k views

FortiGate 60C and Port Forwarding

Without going into too much detail, I'm in over my head due to recent staffing changes and a lot of extra responsibilities falling into my lap that are outside my current area of expertise. So any ...
2
votes
3answers
697 views

Port 80 and 443 won't forward?

I live in Australia, and my ISP is Bigpond (ADSL2) with a "Thomson TG782T" Router, and my port 80 and 443 won't forward. I have set up an Apache server before years ago (I was in a different ...
1
vote
2answers
811 views

How do I do IP Failover for my Public IP address with Linux HA

I did a lot of experiment with heartbeat, corosync and pacemaker for IP FailOver which I have to do with Public IP. I did more than one ip failover(VIPs) with two nodes, also with three nodes BUT ...
0
votes
2answers
68 views

opening a port on a router to all WAN ip's or just a range or specific WAN IP

Just trying to see how many people would be in favor for opening a port on a router, like port 22 or something similar for ssh, to all outside WAN connections or just a set of specific WAN ip's for ...
0
votes
1answer
135 views

Port forwarding from Router 1 to router 2 not working?

I have 2 routers. router 1 IP : 192.168.4.1 router 2 IP : 192.168.5.1 I can easily forward port 8080 from router 1 to router 2 which routes it to a Tomcat server (port 8080 also). I accesss this ...
3
votes
3answers
490 views

How do I configure my US Robotics 9108 router to allow HTTPS traffic?

I have successfully configured an Apache2 webserver on one of my computers. Local access through HTTPS is working (https://localhost). However, I cannot convince my router (a USR 9108) to allow ...
0
votes
1answer
295 views

SQL Server Configuration in LAN by ADSL Router

I have a LAN which I connect two PCs through an ADSL Router. I want to disable the internet on the PC carrying the SQL Server, and of course want to still be able to connect to SQL Server from the ...
0
votes
1answer
98 views

Anyway to build a local webserver without config your router? [closed]

I always config router / port forwarding, when I try to build a local web server IIS7 / Apache. But this time, I don't have access to control router, we have any software, any ways can help to build ...
2
votes
1answer
138 views

Using a dynamic dns securely

I'm bit of a newcomer when it comes to networking, firewalls and port forwarding - please bear with me: I've just setup a dynamic DNS that points to my external IP and are handled through my Cisco ...
1
vote
2answers
620 views

Port Forwarding not working locally

I have a new Comcast Business Gateway that just replaced my old, perfectly-functional residential modem. I noticed the router I had only had a 10/100 ethernet WAN port but I have a 100mbit connection, ...
0
votes
1answer
416 views

Forward all ports to single machine on NETGEAR WPN824v2

Using my NETGEAR WPN824v2, I would like to forward all ports to a single machine. However, when I try to add a single forwarding entry to an otherwise empty forwarding list, it complains that there is ...
0
votes
3answers
279 views

Port forwarding stopped working (apart from to one server)

I'm pretty stumped with this, I've been messing around with it for hours with no joy - I know it'll be something stupid I've missed. At our old office we have a Netgear DG834PN router which has ...
1
vote
2answers
1k views

Opening and Testing Ports on Modem > Router Connection

Working off of my last question, I can access my server's FTP over the LAN but not over the internet. I'm using Filezilla on port 666. My router/modem configuration is as such (similar to other ...
1
vote
2answers
920 views

VPN can connect but cannot VNC or RDP?

I am running Windows XP Professional SP3 on my Dell laptop. I use a VPN to connect to my work network to work remotely and control the computers and servers etc. I am connecting at home from an O2 ...
2
votes
1answer
556 views

How come I can't redirect TCP ports on this wireless router?

I am configuring a router to redirect TCP port 5900 (yes, this is for VNC) to a specific IP address on the network. Here is what I have: From a local computer on the same network, I can telnet to ...
0
votes
1answer
581 views

Nginx can't be accessed from outside?

I got a server set up. It's perfect from 127.0.0.1, but if I try from my "real" ip it loads forever, and then chrome says "Can't connect." Basically it does not allow external access. I'm behind a ...
1
vote
1answer
459 views

Server over VPN?

I don't know that much about VPN, so it could be that this is utterly impossible. Here's hoping, though. I would like to forward a port from my router to a machine connected to the network via VPN. ...
1
vote
2answers
559 views

ubuntu server refusing connections via port forwarding

Getting some really weird behavior from our Ubuntu server... it's behind a Verizon router firewall with port forwarding (port 8080 to port 80 on the server), and we've been having issues accessing it ...
1
vote
2answers
94 views

Question about port forwarding on router

How to forward from from port 222 to 22 inside local network to ip 192.168.1.103 for example? Have router TPL-Link TL-WR740N_V1 Setting allow to forward only outside port, but not for ip inside ...
0
votes
2answers
255 views

My Domain returns the routers default page (hosted on server in the same network)

Hello I have setup an Apache/PHP/MySQL on CentOS 5.5 with and have installed WebMin on it. I would like to take my server online. And try to host multiple sites on it for my research. My current ...
0
votes
2answers
1k views

Samba port forwarding?

Here's my situation: On my network, most of the clients are on an outside router. Router 1 192.168.1.1 | | - Client | Router 2 192.168.1.2 to router 1, | 192.168.2.1 to clients ...
2
votes
2answers
7k views

How to forward UDP Wake-on-Lan port to broadcast IP with IPTABLES?

I'm trying to setup Wake-on-Lan for some of the LAN computers at home and it seems that I need to open a UDP port (7 or 9 being the most common) and forward all requests to the broadcast IP, which in ...
1
vote
2answers
189 views

Bind an external and internal ip together

I have an ActionTec MI424-WR router that has 5 external IP addresses bound to it. One of the servers behind the router is a mail server on an internal address. When the mail server receives mail, it ...
3
votes
2answers
2k views

Port forward localhost:port to lan:port using iptables - how?

Is there a way I can map 127.0.0.1:3389 to 192.168.1.2:3389 (with iptables? That is, all connections to localhost:3389 will be redirected to my LAN machine? The reason for that is as follows: my ...
1
vote
2answers
4k views

How to avoid double-NAT with Netgear VVG2000 VDSL router/modem?

I have a Netgear VVG2000 VDSL router/modem from my ADSL provider. Its Ethernet ports are 10/100 and it doesn't have external wireless antennae, so I'd rather stick to my D-Link DIR-655 as the primary ...
1
vote
1answer
823 views

LAN->LAN IP translation (for TortoiseSVN + Artifacts + Buffalo router)

Here's my scenario: I've got a VisualSVN server on my main dev box @ home. I'm also using Visual Studio 2010, TortoiseSVN, VisualSVN client (for source control), and Versioned 'Artifacts' (for bug ...
3
votes
1answer
221 views

Port forwarding with 2 routers

I have a simple 2 router setup. I'm using the second router as a switch and for wireless. The first router is forwarding a few ports (80, 443, 1433) on to a computer with a reserved I.P. address ...
0
votes
1answer
711 views

Network structure --> Server 2k8r2 <--> Livebox <--> Router <--> Other PCs [closed]

I have a Livebox connection to the Internet and I have set up my network as follows: - Livebox <--> Win2k8R2 Server - Livebox <--> Netgear N150 Router - Router <--> Other PCs ...
0
votes
1answer
1k views

Why won't my router forward ports correctly?

I have a Linksys RV042 dual-wan router (which directly responds to any traffic at *.*.*.*) and my FTP server is running Windows Server 2003 R2 SP2 and IIS. My server's local IP address is *.*.*.* ...
1
vote
3answers
415 views

If am using Remote Desktop to login to a remote machine, how does the data for this connection get back into my machine?

If am using Remote Desktop to login to a remote machine, how does the data for this connection get back into my machine if I don't open any ports on my router?
1
vote
2answers
960 views

Port-forwarding on livebox to router

At home, I have two routers, one Livebox and a Netgear. The reason why I need the Livebox is that the phone line cannot be connected to the Netgear router. So I have the Livebox connected to the ...
1
vote
1answer
4k views

Port forwarding with multiple IP's

I work at a company which uses a Fortigate 60 router, something I'm not really familiar with. Everything worked fine with it until a week ago when Comcast came in and replaced our modem. It seemed as ...
0
votes
2answers
11k views

Port forwarding on Fortigate 50B

I have serious problems setting up port forwarding on a Fortigate 50B. The unit is basically running as factory default, the wan1 interface is connected to my fibre optic internet modem, and my lan ...
1
vote
2answers
992 views

Zyxel P-320W: How to connect to my web server using public IP

My company's router is Zyxel P-320W and I have a public static IP. I registered a few domains name and point to this IP address. I already setup Virtual Hosts and configured port-forwarding to my ...