Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

1
vote
1answer
21 views

Transfer raided drive between to identical HP Proliant DL360 G5

I have two identical HP Proliant DL360 G5 servers with HP Smart Array P400i controllers. I want to move the drives from one of the servers into the other server. Will the controller of the new ...
3
votes
1answer
34 views

how to determine which drive belongs to which slot on raid 5

i have an HP DL380 G8 machine with 4 hard drives of same size and running on raid 5. unfortunately during a service process of our data center one of the junior team members pulled out all four hard ...
1
vote
1answer
29 views

Alternative system fans for EOL HP ML150 G6 servers

Background I have an HP ML150 G6 server that HP made 'End Of Life'. I added a second processor to the system but then was unable to get past POST due to a missing system fan. I found a diagram that ...
1
vote
3answers
66 views

Is it possible to see the RAM units configuration on HP ProLiant DL380 G5

I have an HP ProLiant DL380 G5 Server in the datacenter running Windows Server 2008 R2. I need to think about upgrading RAM on this server and decide on configuration of RAM units I am going to ...
1
vote
0answers
35 views

HP Dl360e Gen8 Not Detecting Hard Drives

I have a new HP Proliant DL360e G8 and it is not detecting the hard drives. We are using both non-hp, and official hp hard drives from an older server (DL120). Hard drives are 3.5" and they are not ...
0
votes
1answer
24 views

Is it possible to use a HP P410 Controller in a ML150 Gen5 server? i.e. is there a cable that interfaces with a Gen5 cage?

Specifically I want to use a SAS card (a P410) and some drives that I have spare in a ML150 Gen5 server. If there is a cable that converts mini SAS to the Gen5 SAS cage connection can someone point ...
0
votes
0answers
30 views

VM Cloning Transfers cause Blade outage [closed]

I used to be able to do this sort of thing without any problems, though the speed was still not all that great. Hardware: HP Proliant C3000 enclosure BL460c G7 blades BLc SB40c Storage blade ...
1
vote
1answer
39 views

HP ProLiant DL360p Gen8 how to choose correct heatsink? [closed]

We purchased a new HP Proliant DL360 gen8 server (670640-425) (HP DL360p Gen8 E5-2620 Base EU) at the same time we purchased the cpu/heat-sink package for a 2nd CPU (654782-B21) (HP DL360p Gen8 ...
1
vote
1answer
119 views

HP SSD on ProLiant DL360p Gen8 p420i controller - no TRIM?

We have a HP Proliant Dl360 Gen8 server with the 420i 2Gg disk controller. (646905-421) we have a couple of the HP Gen8 200GB 6G SAS SLC SSDs (653078-B21), (they run in RAID1) We run Debian6 on this ...
0
votes
1answer
29 views

Difference of HP network adapter types?

HP have a special type of cards they call FlexibleLOM, and I can't figure out what the differences are of the following HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Ethernet 10Gb 2-port ...
3
votes
2answers
162 views

How can I monitor HP P410 hardware RAID degraded in Freenas

I would like to run freenas on a HP P410 hardware RAID 5 4x600GB 15k SAS array and be alerted in the case of physical disk failure, however the freenas documentation says: to prevent problems, do ...
6
votes
1answer
119 views

Is it possible to enable RAID 1 on an already in-use HP Proliant DL380 G5

I have a HP Proliant DL380 G5 with two HDDs in RAID 0 (Stripe)(72GB+72GB). It has been running Windows Server for quite a while now and has 30GB of occupied space on a stripted volume. I've now ...
-1
votes
1answer
85 views

Continuous I/O latency error on ESXi 5.0

Recently I posted a question on HP Proliant DL180 G6 - Smart Array P410, bay 11 error which the answers helped me to dig through. And today that I just noticed under my vSphere log which gives a ...
3
votes
4answers
296 views

HP Proliant DL180 G6 - Smart Array P410, bay 11 error

I've been trying to search over ther internet for a solution to fix this. I'm the new IT person for my organization and our previous IT have not kept any records on certain things. I do understand, ...
4
votes
1answer
73 views

Updating firmware on HP ProLiant DL380 Gen8 failed

I tried updating the firmware on my HP ProLiant 380e Gen8, but I received this error: What could be the reason? Could it be because of limited disk space in the /tmp directory? ~ # df -h ...
-1
votes
1answer
51 views

hp proliant dl380 g5 won't power up [closed]

Sorry for a probably silly question. I just bought an used hp proliant dl380 g5. It is supposed to be in a ready to use state. The problem is that it does not power up. The power green lights at the ...
2
votes
1answer
101 views

HP ProLiant with SATA/SAS Drives

I Currently have a DL350 G5. I have 4 74GB SAS drives in RAID that work fine but I tried to add a 1TB WD RED SATA drive for some storage and the RAID controlling isn't giving me an option to create a ...
0
votes
0answers
39 views

I am seeing error during boot sequence on HP ProLiant ML350p Gen8

The error states: Caution: Memory conflict detected. You may face boot problem. What steps would you recommend I take to troubleshoot this? Details: Dual Xeon E5 v1, two LSI 9286-8e ...
1
vote
2answers
90 views

HP Smart Array P822 w. Dual D2700 - cabling for best performance

Reading the D2600/D2700 User guide, there's a section called "Cabling examples", but none of the examples match what we intend to do. I just want to make sure that it makes sense, before we do it. ...
0
votes
2answers
64 views

Uncorrectable Machine Check Exception on HP DL360 G7

i have about every hour in IML (hplog) from HP DL360 G7 record: CRITICAL: CPU - Uncorrectable Machine Check Exception (Board 0, Processor 1, APIC ID 0x00000003, Bank 0x00000005, Status ...
1
vote
1answer
89 views

logical drives on HP Smart Array P800 not recognized after rebooting

We had a Smart Array P800 configuration working fine (RAID5). Physically, we have a disk enclosure (like this) connected with a Linux Server. Here is what happened: This server was accidentally ...
-3
votes
2answers
186 views

HP ProLiant DL380e Gen8 has high fan speed after installing second CPU

Today I installed a second CPU in our HP ProLiant DL380e Gen8, and after booting the fans all went to 99.96%. This causes the server to make an enormous amount of noise. Could it damage the server? ...
2
votes
1answer
44 views

Installing DIMM modules in HP ProLiant DL180G6 not in recommended order

I have two DL180G6 servers, I used them with 2x2 GB RAM modules, now I'd like to upgrade the memory to 16 GB for each. I have spare 6x2 GB RAM modules per machine (parameters match for the existing ...
2
votes
1answer
220 views

CentOS 6.5 with HP ProLiant DL360e Gen8

I have a chance to install a new HP ProLiant DL360e Gen8 server. There are three hard drives. How do I configure RAID 1 on this type of server. Will RAID already be configured so that it will look ...
1
vote
1answer
119 views

Installing XenServer 6.2 on Proliant DL160G6 freezes during “Installing from base pack”

I'm trying a new install of XenServer 6.2 on an HP Proliant DL160G6 with a HP P410 raid card configured as RAID 5 over 4 drives, with a 256M BBWC. The install starts off properly, but when it gets to ...
2
votes
1answer
67 views

HP DL380G6: Where is the Temp. Sensor #29 (System Zone)?

The Temp. Sensor #29 of my HP DL380G6 seems to give me a wrong number. It says that the temperature is more than 50C (Caution: 60C, Critical: 65C) while the actual value is 13C. And I think it may be ...
3
votes
1answer
53 views

Network card location

I am generally familiar with hpacucli and hpasmcli but how do I determine in which slot a network card is installed? I need to be able to map to and from the slot and the MAC (and from there to the ...
-1
votes
1answer
58 views

HP ProLiant - Does ILO 2 Advanced offer additional SNMP or IPMI features?

We've got ML350 G5 servers with iLO 2 standard license. Does upgrading to higher iLO license will unlock new SNMP or IPMI data registers? If it will, which ones?
3
votes
2answers
109 views

Switch disks between array controllers

I have an HP ProLiant ML 350 G5, which has an HP Smart Array E200i/128 BBWC Controller embedded. This controller manages two arrays (each with three 72 GB disks in RAID 5) This controller has ...
2
votes
0answers
62 views

HP SNMP Traps signalled every 10 seconds for a NIC

I'm trying to setup SNMP traps on my HP DL160 G6 (Xenserver) to notify me whenever I have issues with the server. Following suggestions from this serverfault post, I've installed the HP SNMP agents ...
0
votes
1answer
54 views

HP ML150 G6 upgrading RAM/CPU beyond specs?

I am being told that some limits on some HP servers can be crossed. Do any of you have any experience with that? A ML150/G6 is limited to 48GB RAM but I have been talking to a German company that ...
-5
votes
2answers
35 views

Drive fault was asserted DELL [closed]

i have a DELL PowerEdge 2950 Server whit raid for 3 HDD. A friend whit a HP Proliant server which has broken, come to my help, to save information from the hard drive only had. When i put on my server ...
3
votes
2answers
191 views

HP DL320e Gen8, 3TB drives, Windows Server 2012 R2 - HDD full capacity alocation difficulties during installation

One interesting task to do but not so easy as i thought. The server is HP DL320e gen8, The main difficulty is with partitioning the RAID1 (2x3TB HDDs) during the installation on 2 partitions (System ...
4
votes
1answer
97 views

HP ProLiant Gen8 Health Agents and EL6.x - cpqHoMibHealthStatusArray has changed to the value: x

I've noticed that my HP ProLiant Gen8 servers report the following message via email to root (or the destination configured in /opt/hp/hp-snmp-agents/cma.conf) upon restart. Trap-ID=11020 ...
0
votes
2answers
141 views

“HP Insight Management WBEM Providers” download

I am trying to query a Proliant Server's health thru Powershell. But I can't find a place to download the HP Insight Management WBEM Providers from here. Is there any other Powershell equivalent of ...
1
vote
1answer
45 views

Sideband on HP ILO2 and initial in-OS setup possible?

Is it possible to configure sideband (ILO being physically accessed from one of the main NICs as opposed to the dedicated ILO NIC) for the ILO2? Also is it possible to configure the ILO2 initially ...
0
votes
0answers
73 views

hp-health install doesn't work on Debian 7 (Wheezy)

I try to install hp-health on my HP ProLiant ML350 G4 server with a Debian 7 (Wheezy) installation. I downloaded the package on : ...
1
vote
1answer
367 views

P420i Array Management in ESXi 5.5

I have a HP 380p Gen8 server with ESXi 5.5 running on it and HP Smart Array P420i. I've installed 4 new hard disks on it and want to put them in a RAID 6 array (Although RAID 10 would be OK too). ...
2
votes
1answer
206 views

HP ILO utility for Ubuntu - hponcfg fails due to missing hp-ilo package

I'm working with an Ubuntu-based system running on an HP ProLiant DL360p Gen8 server. I prefer to install HP's management agents when I can for full hardware monitoring/configuration capabilities. ...
0
votes
1answer
81 views

How to set up direct access storage between a BL460c Gen8 (Win Server 2012) and D2220sb storage blade

I have installed a D2220sb storage blade in a c3000 enclosure. The storage blade's partner device is a HP BL460c Gen 8 Server. How do I setup a direct access storage? I have googled and tried to ...
1
vote
1answer
296 views

Fastest server ram configuration for 48GB?

I have an HP ProLiant DL160G6 server, with 2 CPU's and 48GB ram, with following modules: 4x 8GB Module - DDR3 1066MHz (KTH-PL310Q8/8G) 4x 4GB Module - DDR3 1333MHz (KTH-PL3138/4G) I'm re-purposing ...
26
votes
2answers
475 views

HP plan to restrict access to ProLiant server firmware - consequences?

I've been a longtime advocate for HP ProLiant servers in my system environments. The platform has been the basis of my infrastructure designs across several industries for the past 12 years. The ...
2
votes
2answers
96 views

HP DL380G6 + MSL2024 LTO6 SAS : Which HBA? [closed]

I'm going to upgrade our backup server and I'd like to confirm that the following specs won't choke after the purchase. It'd be great if you could tell me your opinion Our current setup is: HP ...
3
votes
1answer
94 views

Multiple Servers, Multiple Drive Failure within 12 hours?

In the IT world I just won the Lottery Twice.... Today we had a hard drive fail in a raid array. A few hours later we had another drive fail on a different server.... We started checking all the ...
3
votes
2answers
104 views

Which type of RAM we should use? Registered or Unregistered?

We are planning to buy two different servers from HP. They will be used in project where we do lot of statistical analysis and Java development/testing etc. Servers are : a) Part :ML350e 2403 CTO ...
1
vote
1answer
39 views

HP SL250s will not boot from the network, does not appear to DHCP

I have an HP Proliant SL250s Gen8 (right-hand) server which is apparently not able to boot from the network. If I configure the system to PXE boot in the BIOS, or if I hit F12, it does start up the ...
0
votes
2answers
281 views

Poor SQL performance on HP ProLiant ML310e Gen8 v2 with raid10

I recently bought HP ProLiant ML310e Gen8 v2 server with 8G's RAM and 4 HP 1TB 6G 7.2k rpm SATA (3.5in) Non-Hot Plug MDL HDD disks. It was surprise to me that HP didn't provide debian drivers for ...
0
votes
1answer
177 views

HP ProLiant DL385 G6 - “Fan Solution Not Sufficient” error

I have a HP DL385 G6 that is acting up. Weeks ago it stopped booting with an error of Fan Solution Not Sufficient. The front panel indicating that fans 3 and 4 were down though both these fans are ...
9
votes
2answers
366 views

Are consumer class hard disks okay for zfs?

I just recently bought a new server an HP DL380 G6. I replaced the stock smart array p410 controller with an LSI 9211-8i. My plan is use ZFS as the underlying storage for XEN which will run on the ...
1
vote
2answers
206 views

HP ProLiant DL380e Gen8 server - SPP use

I am planning to install Oracle Linux 6.4 on an HP ProLiant DL380e Gen8 server. I have been advised to use Service Pack for Proliant SSP DVD to install/update the missing utilities drivers for Oracle ...