1
vote
1answer
26 views

HP ProLiant dl360 G4 with external backup

We are running a HP Proliant DL360 G4 with external HP Storageworks Ultrium 960 tape drive attached at the moment. Unfortunately the tape drive failed over the weekend and we are looking to upgrade ...
1
vote
1answer
65 views

HP DL380 Gen8 doesn't turn on

We have a HP DL380 Gen8 in one of our data center and it is connected to a UPS, I checked the ILO and know that due to unstable electric powe,r the server has been shutdown with the following error: ...
1
vote
1answer
114 views

HP ProLiant DL380 G6 with 2 x Intel x5650 CPUs

I have an old HP DL380 G6 server, I am trying to upgrade the processor. I added 2x X5650. but each time I powered the server on, the fans stat working loudly and keep like that. the server never never ...
4
votes
1answer
883 views

Proliant DL380 G7 won't boot, solid amber power LED

I have a problem with an HP Proliant DL380 G7 that leaves me without much in the way of troubleshooting approaches. This server will not boot. It was stored in a datacenter, and I went to retrieve it ...
2
votes
3answers
476 views

Performance of HP SSDs in HP servers

I am trying to find performance data about the official SSDs offered by HP for their servers. I can hardly find any specifications on the HP website or somewhere else on the Web. The device I am ...
2
votes
1answer
279 views

HP Proliant DL380 G3 not booting. Error “1611 fan 7 not present” after changing power supply

I inherited an HP proliant DL380 G3 some years back and it's been working faithfully as a games/web/build server. At some point during the past year where I haven't been using it the power supply ...
-1
votes
1answer
145 views

Difference of HP network adapter types?

HP have a special type of cards they call FlexibleLOM, and I can't figure out what the differences are of the following HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Ethernet 10Gb 2-port ...
0
votes
2answers
776 views

Uncorrectable Machine Check Exception on HP DL360 G7

i have about every hour in IML (hplog) from HP DL360 G7 record: CRITICAL: CPU - Uncorrectable Machine Check Exception (Board 0, Processor 1, APIC ID 0x00000003, Bank 0x00000005, Status ...
2
votes
0answers
242 views

HP SNMP Traps signalled every 10 seconds for a NIC

I'm trying to setup SNMP traps on my HP DL160 G6 (Xenserver) to notify me whenever I have issues with the server. Following suggestions from this serverfault post, I've installed the HP SNMP agents ...
1
vote
1answer
381 views

Fastest server ram configuration for 48GB?

I have an HP ProLiant DL160G6 server, with 2 CPU's and 48GB ram, with following modules: 4x 8GB Module - DDR3 1066MHz (KTH-PL310Q8/8G) 4x 4GB Module - DDR3 1333MHz (KTH-PL3138/4G) I'm re-purposing ...
26
votes
2answers
981 views

HP plan to restrict access to ProLiant server firmware - consequences?

I've been a longtime advocate for HP ProLiant servers in my system environments. The platform has been the basis of my infrastructure designs across several industries for the past 12 years. The ...
1
vote
1answer
90 views

HP SL250s will not boot from the network, does not appear to DHCP

I have an HP Proliant SL250s Gen8 (right-hand) server which is apparently not able to boot from the network. If I configure the system to PXE boot in the BIOS, or if I hit F12, it does start up the ...
1
vote
1answer
691 views

HP ProLiant DL385 G6 - “Fan Solution Not Sufficient” error

I have a HP DL385 G6 that is acting up. Weeks ago it stopped booting with an error of Fan Solution Not Sufficient. The front panel indicating that fans 3 and 4 were down though both these fans are ...
2
votes
1answer
2k views

HP ProLiant DL380 G7 servers will not POST

We have just received 2 HP DL380 G7's from our DR site. They have been running fine at the site for some time but we have tried to power them up in our DC and they will not post. We get a very brief ...
10
votes
3answers
2k views

Force renegotiation of PCI Express link speed? x2 card reverts to x1 width

In an effort to circumvent compatibility and cost barriers to using SSD drives with newer HP ProLiant Gen8 servers, I'm working to validate PCIe-based SSDs on the platform. I've been experimenting ...
13
votes
3answers
5k views

What happens when the USB key or SD card I've installed VMware ESXi on fails?

An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed :( I encountered some ominous looking messages on the vCenter console and in the HP ProLiant ILO event ...
4
votes
1answer
294 views

DDR3 10600 memory running at 533mhz

I bought a second-hand HP ProLiant DL160 G6 a year ago with 48GB configured in it. I discovered checking with cpu-z and doublechecked with speccy the memory runs at only 533Mhz. I checked the ...
0
votes
2answers
921 views

HP ProLiant DL320 G5 No Video Output, No Error LEDs, Swapped Motherboard, Same Issue

I have a HP ProLiant DL320 G5 Server that we have swapped out the motherboard with a working one, tried narrowing down removing different memory sticks, swapped out the onboard battery. I have a ...
2
votes
2answers
1k views

Can I put in laptop 2.5" SATA drives into an HP ProLiant DL380 G5?

I have an HP DL380 G5 server and I was wondering if can I put in standard notebook 2.5" SATA drives? In the front where the drives go, the SATA connections dont seem to fit.
2
votes
4answers
8k views

HP ProLiant ML310e Gen8 early system initialization hangs on 90%

just unboxed a brand new HP ProLiant ML310e Gen8 Server. I can reach the iLO webinterface but the Server hangs on the early system initialization on 90 % with the status code 0114. I did not find any ...
-2
votes
1answer
354 views

HP DL360p Gen8 for low latency trading - what to upgrade? [closed]

I'm using HP DL360p Gen8 for low latency trading (but not ultra-low-latency!). It means that i'm working in frame about "10+ microseconds" and i don't care about "1-5 microsecond" or nanoseconds. I ...
0
votes
1answer
220 views

Refresh a specific page in ilo 4

I use iLo 4 for my HP dl380 gen 8. I access iLo webpage using internet explorer 10. (Although I would gladly use another browser if anyone can recommend a better one for iLo access). How can I ...
0
votes
3answers
828 views

Graphing temperature over time for HP iLo 4

Server: HP DL380p Gen 8, running latest iLo 4. One sensor, Sensor #25 for the HD Controller, tends to run a bit hot when compared to the other sensors. It tends to read 75 C. Caution temp is 100 C. ...
3
votes
1answer
1k views

DL380 G4 dead after erasing NVRAM

Got a used HP ProLiant DL380 G4 server. It was at least able to start from an Ubuntu live CD a few days ago. When I connected the iLO-port to a router with DHCP server iLO 1.62 was accessibly using ...
32
votes
1answer
8k views

HP ProLiant DL360 G7 hangs at “Power and Thermal Calibration” screen

I have a new HP ProLiant DL360 G7 system that is exhibiting a difficult-to-reproduce issue. The server randomly hangs at the "Power and Thermal Calibration in Progress..." screen during the POST ...
0
votes
2answers
3k views

How do I upgrade my HP ProLiant ML150 G6 server RAM?

I want to upgrade the RAM on two HP ProLiant ML150 G6. They currently have 2 dimms labeled 2GB 2RX8 PC3-10600E-9-10-E0. I believe these are UDIMMs? The servers have a total of 12 memory slots. In ...
5
votes
2answers
3k views

How to reset password for HP Proliant ML330 G6

We have HP Proliant ML330 G6 and its BIOS is closed with password. Password is already forgotten and we can't get there. Is there any way to crack or reset a password at this box?
3
votes
1answer
604 views

moving raid 10 to another identical server both on Smart Array 6i controllers

I have dead HP DL 380G4 with RAID 1+0 with 1 logical volume from 4x72GB drives on built-in Smart Array 6i 128Mb BBWC. It was shut down properly. It seems it was usual death for Proliant with ILO led ...
7
votes
3answers
806 views

What is the name of this screw? (from HP ProLiant quick-deploy rail kits) [closed]

I need the name of the screw for the HP quick deploy rail kit. The screw clicks into the square holes of the rack. It is a Gen4 Rail kit but the screw is like the Gen8 Rail kit ones. I called HP ...
2
votes
1answer
181 views

ProLiant DL360 ASR

I have several ASR events on my DL360 G4p without any reason. There is nothing in the log file. I installed a remote syslog server. There I only see the rebooting messages. In the iLO nothing is ...
3
votes
2answers
3k views

How to make my HP server boot faster?

I have an HP ProLiant DL370 G6 server that I am using as a workstation. It takes 60 seconds during reboot and cold boot before screens post with a discrete Radeon HD6xxx GPU. What can I do to make ...
2
votes
2answers
578 views

How to get HP ASM to work under Xen Hypervisor?

I have a HP DL560, currently running Debian Squeeze as dom0 on Xen Hypervisor, and the fans constantly run at 100%. In the past this wasn't a problem because I could install HP's ASM which includes ...
1
vote
2answers
2k views

HP ProLiant DL360 G5 fails to reboot

Some history of this also available here. As of my latest update on the forum linked above, now cold reboot as well as hard reset and following boot for my proliant dl360 g5 works as expected and ...
0
votes
1answer
441 views

HP ESXi WBEM Agent Not Showing Power Supply Data

Server: HP ProLiant DL 380 G5 ESXi: 5.0.0 U1 (HP Custom Image) HP SIM: 7.1 (CentOS 6.3 VM) I have my basic hardware monitoring up and running. I cannot see events for power supply failure within HP ...
2
votes
2answers
896 views

Uncorrectable machine check

I am experiencing rare but real unrecoverable machine checks on HP DL370 G6 dual-core Xeon server. I ran memtest86+ before, and ran CPU-intensive operations without any problems. In your opinion, ...
1
vote
2answers
667 views

HP Proliant DL160 G6 - Hardware RAID card to get? [closed]

I have bought a DL160 G6 server (Product number: 490427R-001 ) and it does not come with a hardware RAID card. I am trying to set up a VMWare Esxi server and as such I would need a hardware RAID card. ...
0
votes
1answer
745 views

What's so wrong with the ML350 G5?

It seems there a number of differences between the HP ML350 G5 and G6 G6 has more RAM slots G6 runs leaner, cooler, and quieter When considering an equally spec'd G6 (CPUs, RAM, HD), the G6 is 3x ...
1
vote
1answer
1k views

Which version of SmartStart supports HP DL120 G6?

Version 8.70 for example does not support it - minimum 120G7. So cannot reinstall Windows Server on the old G6 here...
1
vote
1answer
571 views

CentOS 6.2 Server hangs

I have a problem with Centos 6.2 server that is running on an HP Proliang DL380 G4 server where I run a Public FTP Service. The system runs for about a day and then it suddenly hangs, and I cant ...
0
votes
1answer
578 views

HP ProLiant DL360 G7 watchdog

I have dl360 G7 servers. some times kernel got panic. I understood, that server have hardware watchdog timer. dmesg | grep wdt [ 6.344992] hpwdt 0000:02:00.0: PCI INT A -> GSI 16 (level, low) ...
4
votes
2answers
2k views

HP ProLiant DL360 G6 reporting missing fan

I have several refurbished HP ProLiant DL360 G6 servers and several of the systems are reporting fan failures - possibly incorrectly - on fan #2. When running: hpasmcli -s 'SHOW FANS' I get the ...
0
votes
1answer
752 views

HP DL385 Base System Device

I have an HP DL385 with two Operon 280 CPUs and 16 GB of RAM running Windows Server 2003 R2 64 bit. Windows device manager show a yellow question mark for the Base System Device. This device is the ...
0
votes
3answers
858 views

P4300 G2 SAN FAN Header Connections

I've recently had to replace the System Board on my P4300 G2 SAN due to a failure to find a boot drive. Unfortunately after replacing this it won't boot past the POST screen, it identifies that there ...
6
votes
5answers
12k views

How do I get my HP servers to email me when a drive fails?

Ideally, with as simple of install as possible and without requiring rebooting the servers. Mostly for DL380 G5's if it helps. Thanks.
3
votes
8answers
10k views

HP ProLiant DL180 G6 Fan Noise?

Recently i did bought an HP ProLiant DL180 G6 Everything is OK except fan noise , it's too loud. I did some research but found nothing useful , I just wanted to know if there is anything I can do ...
2
votes
5answers
901 views

HP DL380 G3 2U For Basic Web Server in 2012

I have an opportunity to pick up a used HP DL380 G3 2U for $100. I'm looking for a basic entry level web server that I can host a small - medium size website on and more or less learn the ins and outs ...
8
votes
2answers
11k views

Controlling HP ProLiant DL380 G6/G7 fan speed

I'm having fan speeds and noise level issues from my most recent batch of HP ProLiant DL380 G7 servers. Most of the systems are nearly silent with low fan speeds (as reported by hplog -f). The ...
1
vote
1answer
277 views

is there any conflict between HP blade system ProLiant BL680c G5 hardware and Redhat Linux Enterprise 5.5 or 6

We're going to install Linux Red Hat enterprise 5.5 on HP blade server that is connected to a part of SAN storage MSA 2000. I've tested both marked and unmarked sda option in partitioning. I did this ...
0
votes
1answer
162 views

How to read HP's manual about ram modules?

On page 48 in this user guide, it is explained in which order memory modules should be installed for an HP DL385 server with AMD Opteron CPUs. There are 12 banks per CPU, and I have 6 x 4GB + 2 x 2GB ...
4
votes
2answers
493 views

Proliant ML370 G5 and “dongle” removal

Recently I've bought a Proliant ML370 G5 in tower case. After I got it the seller asked me to remove the "dongle" from it and return it back to him. The problem is I can't locate the "dongle" thing in ...