6
votes
1answer
79 views

Replace HP Smart Array E200i without losing data

I've got a Smart Array 200i which seems to have some bad slots (slot 3 and slot 5). It doesn't matter what HD I put in these slots, it keeps telling me the drive is bad. My question is two-fold: Is ...
2
votes
2answers
135 views

Email notifications about hardware RAID status

I have a server with HP Smart Array hardware RAID controller. To monitor its status, I use cpqarrayd. /etc/default/cpqarrayd contains DAEMON_OPTS="-t localhost:162" to send SNMP traps when something ...
0
votes
1answer
331 views

Hard drives indication with controller MegaRAID SAS 9261-8i on HP Proliant DL320e Gen8. Is it possible?

Give me advice, please. My situation: There're the server HP ProLiant DL320e Gen8 and MegaRAID SAS 9261-8i RAID Controller. I installed Controller into server and I reconnected Mini-SAS cord from ...
-4
votes
2answers
275 views

Hardware RAID0: what happens when a drive fails?

With a hardware-based RAID0, what happens when a drive fails? For example, on brand name servers like HP DL120G7 with HP P410, when running FreeBSD on a zfs with a zpool mirror, or DragonFly BSD with ...
3
votes
2answers
424 views

How to determine HP Smart Array model?

How to determine HP Smart Array model on HP server? I own HP 350 G6 server. Really do not know where to look, is there a utility tool that can help me find this information, or is there a sign on the ...
0
votes
2answers
109 views

HP P800 PCI controller disables(!) HP 410i internal controller

I have a HP DL360 G6 server with a very strange RAID controller behavior. I installed a P800 PCI RAID Controller card and all of the sudden I cannot access my hard drives that are connected to the ...
1
vote
1answer
884 views

HP SmartArray P212 disabled, cache module not attached

I have a DL180 G6 server with Smart Array P212 RAID controller. The server runs under Ubuntu. After an upgrade from Ubuntu 10.04 to 12.04 utility hpacucli (ver. 8.50-6.0) stopped working. The error ...
3
votes
3answers
1k views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) ...
0
votes
1answer
1k views

Checking Hard Disk Health on HP P410 RAID Card

How can I regularly check health of HDDs on a HP DL180 with P410 RAID Card on a live system? hpacucli is installed, however, could not see any options for this feature. Using CentOS, 64-bit. Thanks ...
3
votes
2answers
564 views

Write caching in linux

I have read a lot on serverfault and searched on google about write caching, but still cant find the answer. I have an HP ProLiant DL380 G5 with HW raid with 512 MB Battery backed cache. I use debian ...
1
vote
1answer
200 views

Two raid controllers in one HP ML350 G4 server

Here's the situation: I have running HP Proliant ML 350 G4 server, which already has Adaptec AAC-RAID controller and 2 HDD built as Raid-1. Now, I want to add another 2 HDD but for them I have another ...
1
vote
3answers
7k views

How to replace failed drive in RAID 5 array in HP DL380 G4 server

Sorry for not providing more information when I previously posted this question. More detail is provided below. Any feedback would be welcome. I have a HP DL380 G4 2U server which has 6 drive scsi ...
3
votes
1answer
579 views

moving raid 10 to another identical server both on Smart Array 6i controllers

I have dead HP DL 380G4 with RAID 1+0 with 1 logical volume from 4x72GB drives on built-in Smart Array 6i 128Mb BBWC. It was shut down properly. It seems it was usual death for Proliant with ILO led ...
3
votes
2answers
15k views

Can't enter HP SmartArray P410 RAID ORCA set-up on HP ProLiant DL320G6

I've just installed an HP SmartArray P410 controller into my HP ProLiant DL320G6 server. The controller seems detected by the server BIOS (it shows up in controllers list in the BIOS set-up), hard ...
0
votes
2answers
2k views

RAID Controller Compatibility HP ProLiant DL360 G5/6 for DL380 G5

I'm sorry if this question is kind of stupid, but I wonder... Is it possible to use the RAID Controller from a DL360 G5/G6 for a DL380 G5? You see, we have several decommissioned DL360 G5/G6 lying ...
0
votes
1answer
716 views

Removing or Adding a disk to a HP MSA60 array crashes everything

I am really new to RAIDs and all that goes along with them. I simply added a disk (same 500mb size and part number) into the MSA60 raid enclosure and basically everything started going wrong. The ...
3
votes
3answers
5k views

What are the good ways to migrate a RAID array to bigger disks?

I'm looking to replace my hard-drives with bigger-ones and I would like to know what are the best practices in doing this. I have a HP ProLiant with its 256MB version of RAID controller: 03:00.0 RAID ...
1
vote
2answers
404 views

Is HP p212 raid controller supported on Ubuntu 8.04 server LTS?

sorry for my simple question, however I can't find any useful resources on the internet. Except the official HP page about my p212 here. From this I understand that HP doesn't support Ubuntu 8.04. But ...
7
votes
3answers
19k views

HP ACU CLI Examples

Has anyone used the HP Array Configuration Utility Command Line Interface (hpacucli.exe) to get physical disk information into a file? I'm not at the machine right now, but basically I want to find ...
1
vote
1answer
1k views

HP Smart Array p410i rebuild percentage not correctly working

I have a HP Poliant with a p410i and when I rebuild my raid 5 with a quick remove and insert to test the rebuild percentage goes up to 10% and then jumps to 92%. I continues up to 100% and the Array ...
1
vote
1answer
648 views

HP ProLiant DL 180 G5 - Can't see disks

I'm currently learning how to manage the storage of a HP proliant dl 180 g5. It has a Smart Array P400 RAID controller which works fine. So I've actually the problem, that I can't see disks which are ...
0
votes
2answers
717 views

How do I get Busybox Linux/ESXi 4U1 to recognized expanded RAID 5 disk array?

I'm in the process of upgrading a pair of physical servers to 3 virtual machines. The 2 physical boxes (HP DL380 G5 with Smart Array P400 disk controller) will run VMware ESXi 4 update 1. Each ...
5
votes
3answers
1k views

Four disks - RAID 10 or two mirrored pairs?

I have this discussion with developers quite often. The context is an application running in Linux that has a medium amount of disk I/O. The servers are HP ProLiant DL3x0 G6 with four disks of equal ...
-2
votes
2answers
711 views

Red Hat 5.3 on HP Proliant DL380 G5 and failed drive on RAID controller

I have a development ERP server here in my office that I assist with support on, and originally the DBA requested a single drive setup for some of the drives on the server. Thus the hardware RAID ...
0
votes
2answers
1k views

HP Proliant DL320 G5 Raid Advice

So I just acquired this HP Proliant DL320 G5 Server with two 160GB drives setup in a Raid 1 array. I'm planning sticking this in a colo and installing Proxmox (openvz server) and running two ...
0
votes
2answers
478 views

RAID Spare Drive on ProLiant G6 Server

I have a question about the Spare Drive on an HP ProLiant Raid Disk Array. Does the Spare Drive have to be greater or equal the size of the largest RAID drive? For example (is this configuration ...
0
votes
1answer
1k views

Enabling SATA RAID on DL180 G5

How to enable SATA RAID on DL180G5 E5405, because i did not find any equivalent option on the BIOS, nor any prompt for that.