0
votes
0answers
15 views

RAID Configuration P2000 and Dynamics AX 2012R2

we are in process of implementing dynamics ax 2012r2 in our office and our hardware is: 2 x HP Proliant DL380 G8 1 x HP P2000 with 18 15k SAS Disks 2 x 10gbe Switches We will be doing a straight ...
-2
votes
1answer
39 views

Data recovery from deleted raid array

Hello I deleted a raid 1 array on a hp b110i and I wanted to know if it is possible to recover the data. Also if Windows server was on the array that was deleted can it be recovered. Thanks
1
vote
1answer
38 views

HP ML350 Gen8: error erasing disk cciss/c0d0 on PXE

I Have a ML350 Gen8, that on first PXE Boot, will ask me whether I am sure I want to erase raid controller cciss/c0d0 giving me an option of Yes | No. This only happens when the disks are brand new ...
0
votes
1answer
112 views

Kernel panic after boot Centos 6.5 HP DL320 B120i HPVSA

Im working with a new HPDL320 micro server (gen8-2) with a HP Dynamic array B120i My problem is after the setup. I provided the DiskDrive to the installer and everything is fine. at first i used kick ...
0
votes
2answers
73 views

RAID Configuration & File System - What to RAID 1 and what to RAID 0 [closed]

I recently received my first server - it is a HP ProLiant 320e G8. I've installed Debian Wheezy on it. I had to disable the HP Smart Array controller (B120i) because it was creating problems with the ...
1
vote
2answers
100 views

HP Server with P420i - Migrate to RAID 5 Error

I have an HP DL360 G8 with a Smart Array P420i with 3 physical drives, currently setup RAID 0, I would like to migrate to RAID 5. When using the Smart Storage GUI when I attempt to migrate the ...
0
votes
1answer
71 views

How to set two RAID1 on the HP SA-E200i controller?

I have an HP ML350 G5 with a RAID 1 between two SAS disks. I want to add 2 extra disks and configure a new RAID 1 separated from the other one. Reading this topic Multiple RAID arrays on E200i it ...
2
votes
1answer
81 views

Best practice on hot-swapping disk

I've been putting myself to find an learn more about the product before posting a question. Well, I've tried my luck and didn't got a proper answer to my questions. So I'm posting it here. Had an ...
2
votes
2answers
146 views

Combining SSD and HDD in HP dl380p?

I´m planning to buy a dl380p with 25 sff slots with 2 ssd:s raid 1 and 10 hdd:s raid 5, having room for 13 more hdd:s in the future. Is this possible or do I need two raid cards?
1
vote
1answer
86 views

How to change the size for HP smart array without losing data

For a HA clustered setup (RHEL 5.8), my HP DL 380p G8 server consists of this: mirrored root disk(RAID 1): array A physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SAS, 300 GB, OK) physicaldrive 1I:2:2 ...
1
vote
1answer
56 views

Transfer raided drive between to identical HP Proliant DL360 G5

I have two identical HP Proliant DL360 G5 servers with HP Smart Array P400i controllers. I want to move the drives from one of the servers into the other server. Will the controller of the new ...
1
vote
0answers
266 views

HP Dl360e Gen8 Not Detecting Hard Drives

I have a new HP Proliant DL360e G8 and it is not detecting the hard drives. We are using both non-hp, and official hp hard drives from an older server (DL120). Hard drives are 3.5" and they are not ...
6
votes
1answer
176 views

Is it possible to enable RAID 1 on an already in-use HP Proliant DL380 G5

I have a HP Proliant DL380 G5 with two HDDs in RAID 0 (Stripe)(72GB+72GB). It has been running Windows Server for quite a while now and has 30GB of occupied space on a stripted volume. I've now ...
2
votes
1answer
272 views

HP ProLiant with SATA/SAS Drives

I Currently have a DL350 G5. I have 4 74GB SAS drives in RAID that work fine but I tried to add a 1TB WD RED SATA drive for some storage and the RAID controlling isn't giving me an option to create a ...
3
votes
1answer
1k views

CentOS 6.5 with HP ProLiant DL360e Gen8

I have a chance to install a new HP ProLiant DL360e Gen8 server. There are three hard drives. How do I configure RAID 1 on this type of server. Will RAID already be configured so that it will look ...
1
vote
1answer
300 views

Installing XenServer 6.2 on Proliant DL160G6 freezes during “Installing from base pack”

I'm trying a new install of XenServer 6.2 on an HP Proliant DL160G6 with a HP P410 raid card configured as RAID 5 over 4 drives, with a 256M BBWC. The install starts off properly, but when it gets to ...
3
votes
2answers
128 views

Switch disks between array controllers

I have an HP ProLiant ML 350 G5, which has an HP Smart Array E200i/128 BBWC Controller embedded. This controller manages two arrays (each with three 72 GB disks in RAID 5) This controller has ...
-5
votes
2answers
71 views

Drive fault was asserted DELL [closed]

i have a DELL PowerEdge 2950 Server whit raid for 3 HDD. A friend whit a HP Proliant server which has broken, come to my help, to save information from the hard drive only had. When i put on my server ...
3
votes
1answer
105 views

Multiple Servers, Multiple Drive Failure within 12 hours?

In the IT world I just won the Lottery Twice.... Today we had a hard drive fail in a raid array. A few hours later we had another drive fail on a different server.... We started checking all the ...
9
votes
2answers
493 views

Are consumer class hard disks okay for zfs?

I just recently bought a new server an HP DL380 G6. I replaced the stock smart array p410 controller with an LSI 9211-8i. My plan is use ZFS as the underlying storage for XEN which will run on the ...
1
vote
1answer
68 views

Raid 1+0 on HP ML350 G5

I'm trying to setup a Proliant ML350 that has a SmartArray E200i Raid controller. I want to setup RAID 1 but there isn't any option for it, just 0, 1+0, and 5. I only want to use 2 drives since I just ...
1
vote
2answers
414 views

Windows Server 2012 gives error on installation

I have a HP proliant gen8 server on which i want to install windows server 2012. This is supposed to be a file server hence it has 8x1Tb physical drives in it. The problem is after creating a ...
2
votes
2answers
271 views

Detect HP ML370 G5 Bad disk in RAID0

I have one HP ML370 G5 server. Which has four 146GB SAS disks and two 300GB SAS disks that are configured as RAID 0. I have encountered a problem with one of my disks. The windows server event viewer ...
0
votes
1answer
250 views

Hard drives indication with controller MegaRAID SAS 9261-8i on HP Proliant DL320e Gen8. Is it possible?

Give me advice, please. My situation: There're the server HP ProLiant DL320e Gen8 and MegaRAID SAS 9261-8i RAID Controller. I installed Controller into server and I reconnected Mini-SAS cord from ...
3
votes
1answer
114 views

RAID 5 drive upgrade

We have an HP ProLiant ML350 G5 server with an 8-bay RAID 5 array configured on a Smart Array E200i controller. The system volume and data are on the same logical drive. The drives are 72GB each and ...
0
votes
2answers
98 views

HP P800 PCI controller disables(!) HP 410i internal controller

I have a HP DL360 G6 server with a very strange RAID controller behavior. I installed a P800 PCI RAID Controller card and all of the sudden I cannot access my hard drives that are connected to the ...
2
votes
1answer
3k views

Installing Ubuntu 12.04 on HP Proliant DL380e with 1TB SAS Drive

I have an HP Proliant DL380e with a 1TB SAS Drive and I am trying to install ubuntu server 12.04 on it. I have created a RAID array using Array Controller Utility and had a RAID0 logical volume ...
5
votes
1answer
714 views

HP Proliant ML350 G5 SAS HDD

I am getting problem in HP Proliant ML350 G5. Some few days back one of the SAS HDD failed. It was 146GB SAS 15krpm HDD. We got new one which is 146GB SAS 10k rpm HDD. Its on RAID 1(1+0) ...
0
votes
1answer
27 views

How do you get into the interface on a ProLiant DL 366 G7 and set RAID? (Smart Array 410 P)

How do you get into the interface on a ProLiant DL 366 G7 and set RAID? Into the Smart Array P410 controller?
0
votes
2answers
1k views

data lost with RAID5 on proliant DL360 when drives fail

For some reason the Array Controller on my Proliant DL360 G6 couldn't recognize 2 of the 6 750GB drives I am running in a RAID 5 configuration with VMware ESXi 5.1. When I rebooted the server I chose ...
-5
votes
2answers
382 views

P812 “forgot” RAID6 - can't see disks at boot time in ORCA

We have an MSA60 with 12x4TB non-HP issue Seagate Constellation ES.3 drives connected to a P812/FBWC, on which I created a RAID6 over all of those disks with hpacucli and started to copy data on them. ...
1
vote
1answer
742 views

HP SmartArray P212 disabled, cache module not attached

I have a DL180 G6 server with Smart Array P212 RAID controller. The server runs under Ubuntu. After an upgrade from Ubuntu 10.04 to 12.04 utility hpacucli (ver. 8.50-6.0) stopped working. The error ...
1
vote
1answer
260 views

HP 420i RAID raid level transform

I have HP DL360p Gen8 8 with internal 420i controler and FBWC + battery. ACU says that raid level is 1+0. But in details of the controler i've found: Mirror Group 0: physicaldrive 1I:1:1 ...
2
votes
2answers
748 views

HP smart array p400 RAID 1+0; two disks crashed

I am running a RAID 1+0 on a HP ProLiant DL360 G5 with 6 disks (each 146 GB). The mirror groups looks as follows: Group 1 146 GB 1-Port SAS Drive at Port 1l: Box1:Bay1 146 GB 1-Port SAS Drive at ...
3
votes
1answer
1k views

HP Smart Array P400 controller reports physical drives incorrectly

I've been researching on this the majority of the day, when I had time to blow. But now it's just becoming a headache, when I ask the HP P400 for detailed Information on the drives connected to the ...
4
votes
1answer
2k views

Accidentally deleted wrong logical drive HP Smart Array P800 controller

I was tasked to do some rearranging on my company's HP Proliant storage server. In the p800 configuration utility I managed to delete the wrong logical disk, which was a 10 disk RAID 6 array. I'm just ...
1
vote
1answer
188 views

Two raid controllers in one HP ML350 G4 server

Here's the situation: I have running HP Proliant ML 350 G4 server, which already has Adaptec AAC-RAID controller and 2 HDD built as Raid-1. Now, I want to add another 2 HDD but for them I have another ...
3
votes
1answer
3k views

Proliant server will not accept new hard disks in RAID 1+0?

I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ...
3
votes
1answer
1k views

Smart Array P400i Physical Drive failed after being replaced

We have replaced the bad drives in a few HP systems (ProLiant DL360 G5), but they continue to show failed. The drives are part of RAID, and I think this might be why they are appearing as failed. The ...
3
votes
1answer
507 views

moving raid 10 to another identical server both on Smart Array 6i controllers

I have dead HP DL 380G4 with RAID 1+0 with 1 logical volume from 4x72GB drives on built-in Smart Array 6i 128Mb BBWC. It was shut down properly. It seems it was usual death for Proliant with ILO led ...
8
votes
2answers
1k views

Can different drive speeds and sizes be used in a hardware RAID configuration w/o affecting performance?

Specifically, I have a RAID 1 array configuration with two 500gb 7200rpm SATA drives mirrored as logical drive 1 (a) and two of the same mirrored as logical drive 2 (b). I'd like to add two 1tb ...
1
vote
1answer
3k views

HP RAID array - hpacucli

I've noticed that one of the drives has "unassigned" status. Does it mean that it's a spare disk? # hpacucli controller all show config Smart Array P410i in Slot 0 (Embedded) (sn: ...
0
votes
2answers
1k views

Why Debian/Ubuntu doesn't see one RAID 10 logical drive but sees two instead (HP Proliant ML110 G7, B110i SATA RAID Controller)?

I'm trying to install Debian or Ubuntu on HP Proliant ML110 G7 server but it doesn't see one RAID 10 logical drive (as I set in BIOS previously) but sees two instead. RAID SATA Controller is B110i. ...
6
votes
2answers
5k views

Disk/RAID Monitoring for HP Proliant Servers and Ubuntu 12.04

How can I monitor the status of the hard disks and the RAIDs of an HP Proliant server using Ubuntu 12.04. In Ubuntu 10.04 I could use the cciss-vol-status to query the RAID status periodically but ...
0
votes
1answer
1k views

HP ProLiant DL360 G5 disk diagnostic issue

We recently got two used drives (15000) and installed on our HP proliant dl360 G5 server. Created RAID1 and used HP SmartStart CD to perform diagnostics. Interestingly, the Diagnostic tab immidiately ...
5
votes
2answers
736 views

Reusing Raid 5 Drive?

We have two servers (ML530 G2 and DL380G2) w/ identical HP 10K RPM SCSI drives w/ a raid 5. One is decommissioned and the other will be decommissioned shortly. However, one of the drives on the ...
0
votes
1answer
413 views

ML 350 additional SATA RAID controller (mirror only)

I have a Proliant ML350 G8 with two SAS raid arrays currently set up - thereby maxing the default P420i raid controller. I need to set up a large video dump space in addition to this existing set-up ...
0
votes
2answers
1k views

HP PROLIANT ML110 RAID 1 don't rebuild

I have an HP Proliant ML110 G5 with RAID1 mirror. One disk is dead and I took a new disk (same size, rpm and model) and put on the bay, BUT the system doesn't see it... I believed that I had only to ...
3
votes
2answers
3k views

HP DL380 G5 Predictive failure of a new drive

Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives ...
1
vote
2answers
539 views

HP Proliant DL160 G6 - Hardware RAID card to get? [closed]

I have bought a DL160 G6 server (Product number: 490427R-001 ) and it does not come with a hardware RAID card. I am trying to set up a VMWare Esxi server and as such I would need a hardware RAID card. ...