1
vote
1answer
30 views

Optimize unused space in RAID5 due to bigger HDD in spare parts change

I have started with 3x250 GB SATA array, but the old HDDs failed one by one and when the spare parts came they where bigger disk inside and I recently ended up with 3 HDDs of 500 GB. I see ...
-1
votes
1answer
233 views

Repair HP SmartArray p410i

i have an HP proliant server and in the last 4 years i never had a single problem with it. but yesterday i found out that i cant remotely login to my server so i went over and found that one of three ...
3
votes
1answer
37 views

Raid 5 on two scsi buses with different maximum speeds

I'm quite a noob, I'm trying to set up as a study machine an old HP ProLiant DL385 G1. I've configured a RAID 5 out of six SCSI 3.5" HDDs using: - Smart Array 6i controller; - (4 x SCSI Ultra320 ...
3
votes
1answer
73 views

how to determine which drive belongs to which slot on raid 5

i have an HP DL380 G8 machine with 4 hard drives of same size and running on raid 5. unfortunately during a service process of our data center one of the junior team members pulled out all four hard ...
1
vote
1answer
446 views

logical drives on HP Smart Array P800 not recognized after rebooting

We had a Smart Array P800 configuration working fine (RAID5). Physically, we have a disk enclosure (like this) connected with a Linux Server. Here is what happened: This server was accidentally ...
1
vote
1answer
155 views

Questions on increasing RAID 5 array

I'm kind of new to RAID and before I go about increasing the size of ours I would like to get some feedback on if I'm going about this the correct way. I have included as much information as I can ...
3
votes
1answer
124 views

RAID 5 drive upgrade

We have an HP ProLiant ML350 G5 server with an 8-bay RAID 5 array configured on a Smart Array E200i controller. The system volume and data are on the same logical drive. The drives are 72GB each and ...
1
vote
2answers
425 views

Proliant Server E200i Raid Controller does not see array

Help! My server was configured with 3 arrays: array 1 and 2 were each 136Gb raid 5 using the first 5 drives. 3 x 72Gb and 2 x 300Gb. Array 3 was 3 x 500Gb using drives 6 7 8 for 1Tb. I had a ...
-1
votes
1answer
158 views

Building recovery plan for HP DL380 G7 server [duplicate]

Possible Duplicate: Disaster recovery plan development best practicies or resources? I need your help to find out best practice to maintain my server and be ready for any kind of disk error ...
1
vote
3answers
6k views

How to replace failed drive in RAID 5 array in HP DL380 G4 server

Sorry for not providing more information when I previously posted this question. More detail is provided below. Any feedback would be welcome. I have a HP DL380 G4 2U server which has 6 drive scsi ...
-2
votes
2answers
1k views

HP MSA60 complains that new drives are faulty

We got some replacement drives from HP PN 454273-001 1TB 7.2k drives. We put them into the msa. It completes rebuild but when we run the hp insight diagnostics tests. It comes back as read write error ...
5
votes
2answers
825 views

Reusing Raid 5 Drive?

We have two servers (ML530 G2 and DL380G2) w/ identical HP 10K RPM SCSI drives w/ a raid 5. One is decommissioned and the other will be decommissioned shortly. However, one of the drives on the ...
2
votes
1answer
2k views

Repurpose spare drive in HP ProLiant RAID 5 array

We have 8 300GB SAS drives in a RAID5 + Spare configuration. It seems data capacity planning came up a bit short and I need more disk space. Instead of replacing drives with 600 GB models, I would ...
2
votes
3answers
4k views

“Parity Initialization Status: In Progress” for long time

Two weeks ago I installed 6 new hard disks (HP 500GB 6G 7.2K SFF 2.5-inch 2-ports SAS DualPort Midline, 507610-B21) in a "HP DL 380 G5" with a "Smart Array P400" (RAM Firmware Revision 2.08, ROM ...
0
votes
1answer
696 views

Removing or Adding a disk to a HP MSA60 array crashes everything

I am really new to RAIDs and all that goes along with them. I simply added a disk (same 500mb size and part number) into the MSA60 raid enclosure and basically everything started going wrong. The ...
6
votes
2answers
4k views

Convert a Smart Array RAID5 array to a RAID6 (ADG) variant

I have an HP MicroServer (N36L) with a SmartArray P410 controller, a 512MB BBWC unit and four (4) 2TB disks connected. Three of those disks are configured as a single RAID5 array and one is left ...
3
votes
1answer
4k views

RAID5 on SmartArray P410i online resize

I have P410i+256M Cache without battery backup. My RAID5 was build over 3*136GB disks, now all disks were replaced to a 3*300GB array. How can I extend it to use the whole space? HPacucli doesn't ...
3
votes
2answers
4k views

Proliant DL360 Raid5 Hot Swap Drive

I have a DL360 G5 running WinSrvr2003 with a 3 drive (72GB) SAS Raid 5 array on P400i controller. The single array has two partitions. (OS and a data store) Drive 2 has failed and is off line (Amber ...
1
vote
3answers
4k views

HP DL370 G5 hpacucli shows 2 drives as Predictive Failure - safe to try a rebuild 1 by 1?

I have: Openfiler SAN ML370 G5 Smart Array 6400 slot 1 Array B Logical Drive 2 is a RAID5 array of 6 x 148GB 10k hot plug drives making 680GB no spare Last Friday, the power went out, this machine ...
1
vote
2answers
816 views

Smart Array E200 - merging logical drives

Server has Smart Array E200 RAID controller with 8x 146GB SAS 10k drives: I have two logical drives. First set is RAID5 with 3 drives and second set RAID5 with 5 drives. Is there a way to merge ...
2
votes
2answers
478 views

Proliant ML350 G3 System board failure

My ProLiant ML350 G3 Tower server's system board has gone bad after it had an inch of its lower edge in rain water. I have a SCSI controller Smart Array 532 with six (36GBx3 and 146GBx3) under RAID5 ...
2
votes
2answers
2k views

Moving a RAID-5 array from a dead HP ML350 G5 to an HP DL380

We have an HP ML350 G5 with a 3x72GB RAID5 array that we were in the process of decommissioning. After shutting down the server and moving it, but prior to moving the data elsewhere, the server ...
1
vote
1answer
1k views

HP DL380 RAID5 Mistake

I had drives fail in both logical drives on a server. When I replaced failed 146GB drive in Raid 5 array with four (4) 146GB drives. On reboot the Smart Array controller asked if I wanted to accept ...