1
vote
0answers
21 views

Getting SMART info from HP P420i Contrller via a C# application [migrated]

We are trying to communicate with a hp server with a P420i controller via an application written in C#.We have used the "hpssacli" to retrieve SMART info.I was wondering if there is a set of library ...
6
votes
1answer
79 views

Replace HP Smart Array E200i without losing data

I've got a Smart Array 200i which seems to have some bad slots (slot 3 and slot 5). It doesn't matter what HD I put in these slots, it keeps telling me the drive is bad. My question is two-fold: Is ...
1
vote
2answers
64 views

Unsupported Storage Connection Detected on HP DL380 Gen8

I'm hoping this is the right place to ask. I recently received a new HL DL380 Gen8 server, on which I want to install Server 2012 R2 via Intelligent Provisioning. According to the specifications, ...
0
votes
1answer
55 views

HP DL380 G7 Losing Drive Array

I have an HP Proliant DG380 G7 dropping one of it's arrays every hour, on the hour, for 2-5 minutes. The OS is SBS 2011 Standard, the servers runs Exchange, DC, files & Trend WFBS 8. I can watch ...
0
votes
1answer
194 views

HP ProLiant ML350e Gen8 v2 Not Detecting Hard Drives

I have tested several solutions but non of them cant detect my 2 hard drives (legacy mode , acpi and raid embended) I have a 2 Dell-Seagate SAS Cheetah 15k,7 hard drives (ST3300657SS) (they are not ...
2
votes
1answer
141 views

Why isn't my RAID array rebuilding?

Got a notice last night that a drive failed on a server. Got in this morning to replace it, and we're getting the following. Controller config report for the array looks fine, with the unusual status ...
1
vote
1answer
36 views

Optimize unused space in RAID5 due to bigger HDD in spare parts change

I have started with 3x250 GB SATA array, but the old HDDs failed one by one and when the spare parts came they where bigger disk inside and I recently ended up with 3 HDDs of 500 GB. I see ...
3
votes
1answer
2k views

CentOS 7 x64 and HP Proliant DL360 G5 SCSI Controller compatibility

I've an HP Proliant DL360 G5 server with two 72gb HDD in RAID and 2 150gb HDD in RAID. I've Windows Server installed on the 72gB HDD and I'm now trying to overwrite it with a fresh installation of ...
2
votes
3answers
440 views

Performance of HP SSDs in HP servers

I am trying to find performance data about the official SSDs offered by HP for their servers. I can hardly find any specifications on the HP website or somewhere else on the Web. The device I am ...
-2
votes
1answer
90 views

Data recovery from deleted raid array

Hello I deleted a raid 1 array on a hp b110i and I wanted to know if it is possible to recover the data. Also if Windows server was on the array that was deleted can it be recovered. Thanks
4
votes
1answer
76 views

HP DL180 G6 amber light but drive is OK

We have an HP DL180 G6 with 25 SFF SATA drives, running 64-bit Debian Linux. A drive recently failed, so we replaced the failed drive with a new, identical part from HP. The disk controller rebuilt ...
1
vote
1answer
64 views

HP ML350 Gen8: error erasing disk cciss/c0d0 on PXE

I Have a ML350 Gen8, that on first PXE Boot, will ask me whether I am sure I want to erase raid controller cciss/c0d0 giving me an option of Yes | No. This only happens when the disks are brand new ...
-1
votes
1answer
391 views

Repair HP SmartArray p410i

i have an HP proliant server and in the last 4 years i never had a single problem with it. but yesterday i found out that i cant remotely login to my server so i went over and found that one of three ...
0
votes
1answer
461 views

Kernel panic after boot Centos 6.5 HP DL320 B120i HPVSA

Im working with a new HPDL320 micro server (gen8-2) with a HP Dynamic array B120i My problem is after the setup. I provided the DiskDrive to the installer and everything is fine. at first i used kick ...
1
vote
1answer
224 views

Upgrade the firmware of SAS HDD on DL380 G5?

I have a DL380 G5 server with 146GB single-port HDD (DG146ABAB). The HP Storage Array P400 controller is saying that firmware should be upgraded on these drives. I am running VMware ESX 5.1 (no ...
2
votes
1answer
95 views

HP SATA Hot Plug Activity Light & B120i Array Controller

The activity rings on both of my hot plug drives rotates continuous (they are in RAID 1 configuration). The drive status on both is solid green. Is this normal? The iotop command is showing no ...
0
votes
2answers
115 views

RAID Configuration & File System - What to RAID 1 and what to RAID 0 [closed]

I recently received my first server - it is a HP ProLiant 320e G8. I've installed Debian Wheezy on it. I had to disable the HP Smart Array controller (B120i) because it was creating problems with the ...
1
vote
2answers
501 views

HP Server with P420i - Migrate to RAID 5 Error

I have an HP DL360 G8 with a Smart Array P420i with 3 physical drives, currently setup RAID 0, I would like to migrate to RAID 5. When using the Smart Storage GUI when I attempt to migrate the ...
0
votes
1answer
87 views

How to set two RAID1 on the HP SA-E200i controller?

I have an HP ML350 G5 with a RAID 1 between two SAS disks. I want to add 2 extra disks and configure a new RAID 1 separated from the other one. Reading this topic Multiple RAID arrays on E200i it ...
2
votes
1answer
121 views

Best practice on hot-swapping disk

I've been putting myself to find an learn more about the product before posting a question. Well, I've tried my luck and didn't got a proper answer to my questions. So I'm posting it here. Had an ...
2
votes
2answers
286 views

Combining SSD and HDD in HP dl380p?

I´m planning to buy a dl380p with 25 sff slots with 2 ssd:s raid 1 and 10 hdd:s raid 5, having room for 13 more hdd:s in the future. Is this possible or do I need two raid cards?
2
votes
1answer
1k views

CentOS 6.5 not booting after installation on Hp ML310e Gen8

I have experience with Installation and configuration of Windows Server system. I am trying to install CentOS 6.5 on the above mentioned HP box and the installation process goes on without a hitch. ...
3
votes
1answer
39 views

Raid 5 on two scsi buses with different maximum speeds

I'm quite a noob, I'm trying to set up as a study machine an old HP ProLiant DL385 G1. I've configured a RAID 5 out of six SCSI 3.5" HDDs using: - Smart Array 6i controller; - (4 x SCSI Ultra320 ...
1
vote
1answer
136 views

How to change the size for HP smart array without losing data

For a HA clustered setup (RHEL 5.8), my HP DL 380p G8 server consists of this: mirrored root disk(RAID 1): array A physicaldrive 1I:2:1 (port 1I:box 2:bay 1, SAS, 300 GB, OK) physicaldrive 1I:2:2 ...
3
votes
1answer
82 views

how to determine which drive belongs to which slot on raid 5

i have an HP DL380 G8 machine with 4 hard drives of same size and running on raid 5. unfortunately during a service process of our data center one of the junior team members pulled out all four hard ...
1
vote
0answers
599 views

HP Dl360e Gen8 Not Detecting Hard Drives

I have a new HP Proliant DL360e G8 and it is not detecting the hard drives. We are using both non-hp, and official hp hard drives from an older server (DL120). Hard drives are 3.5" and they are not ...
0
votes
1answer
67 views

Is it possible to use a HP P410 Controller in a ML150 Gen5 server? i.e. is there a cable that interfaces with a Gen5 cage?

Specifically I want to use a SAS card (a P410) and some drives that I have spare in a ML150 Gen5 server. If there is a cable that converts mini SAS to the Gen5 SAS cage connection can someone point ...
1
vote
1answer
806 views

HP SSD on ProLiant DL360p Gen8 p420i controller - no TRIM?

We have a HP Proliant Dl360 Gen8 server with the 420i 2Gg disk controller. (646905-421) we have a couple of the HP Gen8 200GB 6G SAS SLC SSDs (653078-B21), (they run in RAID1) We run Debian6 on this ...
3
votes
2answers
711 views

How can I monitor HP P410 hardware RAID degraded in Freenas

I would like to run freenas on a HP P410 hardware RAID 5 4x600GB 15k SAS array and be alerted in the case of physical disk failure, however the freenas documentation says: to prevent problems, do ...
3
votes
4answers
2k views

HP Proliant DL180 G6 - Smart Array P410, bay 11 error

I've been trying to search over ther internet for a solution to fix this. I'm the new IT person for my organization and our previous IT have not kept any records on certain things. I do understand, ...
1
vote
2answers
624 views

HP Smart Array P822 w. Dual D2700 - cabling for best performance

Reading the D2600/D2700 User guide, there's a section called "Cabling examples", but none of the examples match what we intend to do. I just want to make sure that it makes sense, before we do it. ...
1
vote
1answer
525 views

logical drives on HP Smart Array P800 not recognized after rebooting

We had a Smart Array P800 configuration working fine (RAID5). Physically, we have a disk enclosure (like this) connected with a Linux Server. Here is what happened: This server was accidentally ...
3
votes
1answer
2k views

CentOS 6.5 with HP ProLiant DL360e Gen8

I have a chance to install a new HP ProLiant DL360e Gen8 server. There are three hard drives. How do I configure RAID 1 on this type of server. Will RAID already be configured so that it will look ...
1
vote
1answer
479 views

Installing XenServer 6.2 on Proliant DL160G6 freezes during “Installing from base pack”

I'm trying a new install of XenServer 6.2 on an HP Proliant DL160G6 with a HP P410 raid card configured as RAID 5 over 4 drives, with a 256M BBWC. The install starts off properly, but when it gets to ...
3
votes
2answers
138 views

Switch disks between array controllers

I have an HP ProLiant ML 350 G5, which has an HP Smart Array E200i/128 BBWC Controller embedded. This controller manages two arrays (each with three 72 GB disks in RAID 5) This controller has ...
3
votes
2answers
1k views

HP DL320e Gen8, 3TB drives, Windows Server 2012 R2 - HDD full capacity alocation difficulties during installation

One interesting task to do but not so easy as i thought. The server is HP DL320e gen8, The main difficulty is with partitioning the RAID1 (2x3TB HDDs) during the installation on 2 partitions (System ...
1
vote
1answer
2k views

P420i Array Management in ESXi 5.5

I have a HP 380p Gen8 server with ESXi 5.5 running on it and HP Smart Array P420i. I've installed 4 new hard disks on it and want to put them in a RAID 6 array (Although RAID 10 would be OK too). ...
0
votes
1answer
376 views

How to set up direct access storage between a BL460c Gen8 (Win Server 2012) and D2220sb storage blade

I have installed a D2220sb storage blade in a c3000 enclosure. The storage blade's partner device is a HP BL460c Gen 8 Server. How do I setup a direct access storage? I have googled and tried to ...
3
votes
1answer
117 views

Multiple Servers, Multiple Drive Failure within 12 hours?

In the IT world I just won the Lottery Twice.... Today we had a hard drive fail in a raid array. A few hours later we had another drive fail on a different server.... We started checking all the ...
9
votes
2answers
692 views

Are consumer class hard disks okay for zfs?

I just recently bought a new server an HP DL380 G6. I replaced the stock smart array p410 controller with an LSI 9211-8i. My plan is use ZFS as the underlying storage for XEN which will run on the ...
1
vote
1answer
114 views

Raid 1+0 on HP ML350 G5

I'm trying to setup a Proliant ML350 that has a SmartArray E200i Raid controller. I want to setup RAID 1 but there isn't any option for it, just 0, 1+0, and 5. I only want to use 2 drives since I just ...
3
votes
2answers
1k views

Install Oracle Linux 6.4 on HP ProLiant DL380e Gen8 server

installation does not detect the raid 1 logical drive created from ACU. the installation shows the two 2T disks, and after the installation is complete, I can not boot up to the system. I have been ...
1
vote
2answers
2k views

Cannot install Windows 2012 R2 on HP Blades

I have several HP ProLiant BL460c G1 blade servers where I am trying to install Windows 2012 R2. I was able to get it installed on one but can't get it installed on the rest. They all fail with the ...
5
votes
1answer
731 views

Proliant ML310e Gen8 Smart Array Predicted Failure Issue with SSD

This is a question related to this one: Third-party SSD solutions in ProLiant Gen8 servers but not covered by the question or the answers. I have an OCZ 120 gig SSD as system drive on a Proliant ...
3
votes
1answer
63 views

LFF in HP DL360p, how and is it a good idea?

I need a new server with 10 Tb storage and was looking at a DL360p with a D2600. It would do the trick, but it´s quite expensive and I´m looking for alernatives. 4 x 4 Tb would be enough, both for ...
1
vote
2answers
176 views

What “PAL Shim AllocRequest returning NULL” meens?

On a HP DL380e Gen8 with Dynamics Smart Array and SAS RAID installed I try to install Centos, after load the RAID Driver from HP Support Site I can access the RAID and do the installation. The ...
3
votes
1answer
371 views

Format SAS drives HP DL360G6

hoping you can point me in the right direction here. I scored an older HP DL 360G6 and have been having issues installing ESXi. After a bit of searching around a few people suggested completely ...
2
votes
4answers
504 views

Suitability of DL380p-Gen8 + D2700 for SQL 2012 Standard Edition

A question for those who know about HP server performance and SQL... I am trying to spec a suitable server that has the following requirements: Run SQL 2012 Standard Edition (I cannot get approval ...
2
votes
2answers
368 views

Detect HP ML370 G5 Bad disk in RAID0

I have one HP ML370 G5 server. Which has four 146GB SAS disks and two 300GB SAS disks that are configured as RAID 0. I have encountered a problem with one of my disks. The windows server event viewer ...
10
votes
2answers
3k views

SSD (Intel 530) read/write speed very slow with RAID 10

Explanation: We have a Server: Model: HP ProLiant DL160 G6 4 x 240GB SSD (RAID-10) 72GB DDR3 RAM 2 x L5639 HP P410 RAID Controller (256MB, V6.40, Rom version: 8.40.41.00) SSD drives are 4 brand ...