Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

1
vote
2answers
98 views

Windows Tool to read S.M.A.R.T. attributes on SATA drive in HP D2700 Enclosure using P812 Controller

I've got two HP DL380 G7 servers + P812 controller + D2700 enclosure. They're database servers with 144 Gb RAM. P812 firmware is 6.40, D2700 is at 0147 They both worked great with 18 OWC Mercury ...
2
votes
1answer
155 views

HP SATA Hot Plug Activity Light & B120i Array Controller

The activity rings on both of my hot plug drives rotates continuous (they are in RAID 1 configuration). The drive status on both is solid green. Is this normal? The iotop command is showing no ...
0
votes
3answers
110 views

How is NUMBER_OF_PROCESSORS env variable generated?

I have a couple of HP BL460Cs that are being tested to determine which processor we want to go with when we start upgrading our equipment, and there's a problem with this environment variable on one ...
11
votes
3answers
2k views

Force renegotiation of PCI Express link speed? x2 card reverts to x1 width

In an effort to circumvent compatibility and cost barriers to using SSD drives with newer HP ProLiant Gen8 servers, I'm working to validate PCIe-based SSDs on the platform. I've been experimenting ...
0
votes
1answer
130 views

Install RAID driver on HP DL380 G9

I'm trying to install RHEL 6.2 on HP DL380 G9, but the I cannot find the storage during the installation. I thought maybe RHEL 6.2 does not support HP P440AR contoller by default, then I go to HP ...
0
votes
1answer
786 views

HP ProLiant ML350e Gen8 v2 Not Detecting Hard Drives

I have tested several solutions but non of them cant detect my 2 hard drives (legacy mode , acpi and raid embended) I have a 2 Dell-Seagate SAS Cheetah 15k,7 hard drives (ST3300657SS) (they are not ...
0
votes
1answer
454 views

Kernel Panic - Not Syncing: Fatal exception

Server (HP Proliant D320e G8 v2) froze at this screen during boot today (running CentOS 6.5): I was able to get the server to boot after a 'press and hold'. I've been having many problems with the ...
2
votes
1answer
58 views

Windows Server 2012R2 can't be pinged while copying big file (HP DL 380 G8)

I have an HP DL380 G8 Server with installed Windows Server 2012 R2 and newest Network drivers etc. Another Person copied big files from an network share to the local hard disk. While copying the ...
0
votes
4answers
64 views

HP service pack for Proliant with ESXi 5.0

Server: ProLiant DL380 G5 currently system ROM: P56 10/25/2010 I would like to upgrade the system service pack with HP Service Pack for Proliant 2014.06.0_784915-001 ...
3
votes
1answer
50 views

HP Proliant G6 reporting failed SSD drive - alternative strategies for monitoring?

I would like to get your feedback about a controversial situation I found myself in some days ago. I was tasked to use a HP Proliant G6 for development purposes with 2 new (< 2 months, never used ...
29
votes
1answer
1k views

Is it possible to influence the way CPUs are enumerated under Linux?

I have a HP DL380 G7 with 2 mismatched CPUs in it. One is a quad core CPU with faster cores, and one is a 6 core CPU with slower cores. On this box I run an application that due to licensing reasons ...
-1
votes
0answers
56 views

proliant g7 boot usb

So my problem is, that my Proliant N54l G7 doesn't boot from a USB HDD. I previously had my Arch Linux OS installed on a 32gb USB key and it would boot fine. But predictably, the cheap USB key lasted ...
2
votes
3answers
138 views

How can I fix Purple Screen of Death for ESX 5.5?

I have a ESX 5.5 installed on my HP Proliant DL 180 G6 with a configuration of 8X Intel(R) Xeon(R) CPU E5540 @ 2.53GHz, 24 Gb RAM. Recently the server has crashed four times, showing the Purple ...
6
votes
1answer
228 views

Reusing a drive from an array

I read the question here Reusing Raid 5 Drive? but I'm not sure it applies 100% to my situation. What is the standard practice when removing a drive from an array to use as a spare for another array? ...
1
vote
1answer
111 views

Plextor SSDs don't work reliably in HP DL380p Gen8 servers

We recently purchased a few HP 380p G8 servers to add some VM capacity, and decided to add a pool of SSDs to our standard build, to create a "fast" RAID 1+0 array for some of our VMs that have higher ...
1
vote
1answer
48 views

ProLiant DL380p not recognising HP hard drives on boot

I have two ProLiant DL380p rack mounted small factor servers. I have installed the following drives onto both servers: 1x 240GB SSD drive (Crucial NOT HP branded) 2.5" SATA 7.2k rpm 1TB ...
3
votes
2answers
52 views

HP StoreEasy 1630 Pool Expansion

We have a single HP StoreEasy 1630 with the following disk configuration: Pools RAID Drives Capacity Virtual_Disks Physical_Disks Size_Per_Disk A 1 2 450GB 1 ...
1
vote
0answers
37 views

HP Proliant ML350 G5 - smart array initializing

I have a big problem with a HP ProLiant ML350 G5 with 2 SAS HDD 146Gb : it start with the message : "Slot 0 HP Smart Array E200i ... initializing" without any error message. if I test the HDD with ...
3
votes
3answers
1k views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) ...
13
votes
3answers
6k views

What happens when the USB key or SD card I've installed VMware ESXi on fails?

An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed :( I encountered some ominous looking messages on the vCenter console and in the HP ProLiant ILO event ...
2
votes
2answers
624 views

HP Proliant DL360 G7 All DIMM indicator lights amber

I am currently doing a RAM upgrade on an HP proliant DL360 G7 server. After installing the new RAM (18x 8GB KTH-PL316E/8G) the LED indicator lights for every single DIMM turned amber and the health ...
2
votes
1answer
2k views

CentOS 6.5 not booting after installation on Hp ML310e Gen8

I have experience with Installation and configuration of Windows Server system. I am trying to install CentOS 6.5 on the above mentioned HP box and the installation process goes on without a hitch. ...
-1
votes
1answer
138 views

HP ML310e Gen8 v2 is really noisy [closed]

I have a ML310e Gen8 v2 and a problem on initial setup the server. The problem is with the Fan noise and speed. The server is fully updated with the latest firmware available from HP and the setting ...
0
votes
2answers
560 views

iLO 2 remote console NO VIDEO?

my HP ProLiant DL380 G6 server is running fine but iLO does not show any image "no video when" iLO firmware has been upgraded to latest version --> 2.25 04/14/2014 I am using internet explorer 11 to ...
1
vote
1answer
81 views

configure power restore policy HP ProLiant BL2x220c G6 [closed]

After each reboot my server automatically powers on: Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false **Power Restore Policy : ...
2
votes
2answers
1k views

HP Proliant DL120 with 3rd party 4Tb drives not showing full capacity

We've purchased a HP Proliant DL120 G7, which has an onboard Smart Array B110i controller. In the server, we've bought 4 x Hitachi 4Tb SATA drives, mounted them in HP drive caddies and installed them ...
7
votes
5answers
869 views

ML350 G5 - upgrade hot swap drives to 6 Gb/s?

I support a non profit. They got an ML350 G5 donated to them and I immediately put it to good use for them :) It came with four HP 300GB 15K SAS drives - and of course, they have all now failed. I ...
-1
votes
1answer
41 views

Can a 69,85 cm hp ssf proliant sit in a 800mm rack.

Hi can a hp proliant that is specified to be 69,85 cm in length fit into a 800mm closed rack. No air holes at the front of the rack. But there is a cooling unit attached to the rack. There will be a ...
2
votes
1answer
3k views

HP ProLiant DL380 G7 servers will not POST

We have just received 2 HP DL380 G7's from our DR site. They have been running fine at the site for some time but we have tried to power them up in our DC and they will not post. We get a very brief ...
2
votes
1answer
48 views

HP ProLiant Server HDDs - Buy Spare Parts vs. Retail

sometimes i have to upgrade HP Servers. For example when they get a new "job" to do. So lets say i need some more HDDs for an DL360 G7 Server. If the Server has an active HP Care Pack, does it matter ...
3
votes
2answers
505 views

HP DL380G6: Where is the Temp. Sensor #29 (System Zone)?

The Temp. Sensor #29 of my HP DL380G6 seems to give me a wrong number. It says that the temperature is more than 50C (Caution: 60C, Critical: 65C) while the actual value is 13C. And I think it may be ...
2
votes
1answer
188 views

HP DL585 G6 and PCIE SSD

We recently acquired a HP DL 585 G6, fully populated with SAS drives etc, we want to use a PCIe SSD and have brought an Asus RIADR Pcie SSD however the bios fails to recognize this, can anyone suggest ...
3
votes
1answer
397 views

Very slow disk performance on HP P410 with RAID1+0

I have HP Microserver N54L, until recently i have used integrated software raid without problems. I have 2x WD Black and 2x WD Red (non-pro) disks for my raid array. I also have SSD directly on the ...
4
votes
1answer
136 views

Batch configure HP ILO from laptop

I need a method of setting over a thousand Ilo's on our HP DL360p Gen 8 servers (With hundreds more on the way!) Our environment doesn't allow for the use of any automatically assigned address such ...
2
votes
1answer
248 views

RAID5 array Ready for Rebuild

I've inherited administration of a server with a RAID 5 array. We have a damaged database on the array that is just over half the allocated size, so makes recovery impossible. I recently changed the ...
4
votes
1answer
72 views

SLES 10 SP4 (x86_64) - HP Proliant DL380 G4 - Becomes unresponsive randomly

Had the misfortune of upgrading a HP Proliant DL380 G4 from SLES 10 SP2 (i586) to SLES 10 SP4 (x86_64). Although the installation completed smoothly, the server became unresponsive after a couple of ...
4
votes
1answer
145 views

Heat generated by a HP ProLiant DL380p Gen8 entry EU servers

I have to buy a stand alone server rack to be placed in a machine room. The temperature can reach 30°C in the room (I have no choice with regards to the location). In order to correct for this I will ...
1
vote
1answer
61 views

HP ProLiant dl360 G4 with external backup

We are running a HP Proliant DL360 G4 with external HP Storageworks Ultrium 960 tape drive attached at the moment. Unfortunately the tape drive failed over the weekend and we are looking to upgrade ...
7
votes
7answers
5k views

Can I just remove a disk from a live RAID 1 array?

I've read the story about the manager taking out a disk from a RAID 5 array, and then a second one, but I’d just like to try out for myself what happens when I simply disconnect a disk from a live ...
2
votes
1answer
4k views

Network boot from a non-default NIC on a HP ProLiant G7 server

I need to force a ProLiant DL380 G7 server to PXE boot from a non-default (not Port 1) NIC. So far I was unsuccessful in finding out how to do this, or if it's even possible. I will be very grateful ...
1
vote
1answer
97 views

How to install Windows Server 2003 on HP Proliant DL360 G4

I have an HP Proliant DL360 G4, with the 5 working SCSI drives and one broken. I would like to install Windows Server 2003 and have an .iso installation disk. When it try to boot, it starts Caldera ...
5
votes
3answers
498 views

Floppy power to PCI-E card in DL380 G5

I have an HP DL380 G5 server and a PCI-E card that I need to use in the server. The problem: the PCI-E card requires additional power from a 4-pin floppy connector, and the HP DL380 G5's PSU has no ...
1
vote
1answer
4k views

HP Smart Array P420i Array Management in ESXi 5.5

I have a HP DL380p Gen8 server with ESXi 5.5 running on it and HP Smart Array P420i. I've installed 4 new hard disks on it and want to put them in a RAID 6 array (Although RAID 10 would be OK too). ...
1
vote
1answer
169 views

Limit on number of raid arrays in a HP P420i

On the spec sheet of P420i HP raid controller, it says the maximum number of logical drives is 64 with 512 mb cache or above. But what is the limit of the number of arrays one can create. For ...
10
votes
4answers
14k views

Incredibly low disk performance on HP ProLiant DL385 G7

As a test of the Opteron processor family, I bought a HP DL385 G7 6128 with HP Smart Array P410i Controller - no memory. The machine has 20GB ram 2x146GB 15k rpm SAS + 2x250GB SATA2, both in Raid 1 ...
1
vote
1answer
128 views

Drive faults not logged in HP IML on RHEL-based ProLiant server

Today I have had disks on two separate HP ProLiant servers go into Predictive Failure. One of these servers runs Windows Server 2008 R2 and one runs Oracle Enterprise Linux 5 (a RHEL5-based distro). ...
2
votes
1answer
223 views

Force RAID 1+0 HP Smart Array to rebuild

I have a RAID10 with status "Ready for Rebuild", but how can I force the rebuild? # hpacucli ctrl all show config Smart Array E200 in Slot 0 (Embedded) (sn: PA6C90N9SW82IU) array A (SAS, ...
-1
votes
1answer
58 views

migrate from raid 5+1 (spare) to raid 50 without losing data on hp p420i smart array

i have a raid 5+1(spare) with 8 disk of 1TB each one. my controller is hp p420i. i want add to my server another new array 5+1(spare) with other new 8 disk to build one array in raid 50 whithout lose ...
1
vote
1answer
129 views

How to activate NUMA in HP Proliant DL580 G5 Server?

Currently I am working on a task regarding one server with NUMA. The OS running on the server is Ubuntu 14.04.1 LTS. The server has 4 nodes of 16 cpus: Intel(R) Xeon(R) CPU X7350 @ 2.93GHz, i.e. each ...
1
vote
2answers
275 views

Can HP Intelligent Provisioning install RHEL using non-HP media? [closed]

HP DL360p Gen8 has built in Intelligent Provisioning OS intallation. Will it work with stock RHEL bought on http://www.redhat.com or I have to buy Linux only from HP directly ? I don't want to buy ...