Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

-1
votes
1answer
965 views

MikroTik on HP ProLiant DL360 G6

Has anybody installed MikroTik RouterOS v4.4 on DL360 G6 server? Thanks.
9
votes
3answers
124 views
+50

Seemingly Random Components on DL380 G5 No Longer Work After Applying Updates

I have a DL380 G5 running Windows Server 2008 R2 that just had two update bundles applied to it and as a result I have several crucial components that no longer work. The update bundles that were ...
2
votes
1answer
100 views

CentOS 7 x64 and HP Proliant DL360 G5 SCSI Controller compatibility

I've an HP Proliant DL360 G5 server with two 72gb HDD in RAID and 2 150gb HDD in RAID. I've Windows Server installed on the 72gB HDD and I'm now trying to overwrite it with a fresh installation of ...
6
votes
3answers
780 views

Rack Mounting a Server with hot air vents on the top?

We just got a couple of HP DL360 G7's, and I notice it has vents on the top. More hot air seems to exit through these vents than it does anywhere on the back. All our servers in the past have always ...
2
votes
3answers
323 views

Performance of HP SSDs in HP servers

I am trying to find performance data about the official SSDs offered by HP for their servers. I can hardly find any specifications on the HP website or somewhere else on the Web. The device I am ...
2
votes
1answer
53 views

HP Proliant Gen8 boot failure after bios upgrade and processor upgrade

We have a HP Proliant DL360P with one Intel Xeon e5-2650, and we was in need to use two Xeon e5-2670 V2, this server by default this G8 did not recognizes the v2 processor, so we found this procedure ...
2
votes
2answers
131 views

HP Proliant DL360 G7 All DIMM indicator lights amber

I am currently doing a RAM upgrade on an HP proliant DL360 G7 server. After installing the new RAM (18x 8GB KTH-PL316E/8G) the LED indicator lights for every single DIMM turned amber and the health ...
0
votes
0answers
9 views

Fedora20 on a HP Proliant g7 amd turion [on hold]

As in the subject, I'd like to install Fedora 20 on such a machine. It has a raid 0 array with 2 hard drives in it I already tried but the installation is unstable. It freezes randomly. Is there ...
5
votes
2answers
2k views

How to reset password for HP Proliant ML330 G6

We have HP Proliant ML330 G6 and its BIOS is closed with password. Password is already forgotten and we can't get there. Is there any way to crack or reset a password at this box?
2
votes
4answers
5k views

Hadoop JBOD disk configuration on HP Smart Array 410/i disk controller

I'm in a evaluation phase of some hw that could be used for setting up a hadoop cluster. This hw is refurbished (hp G6 servers w/ Smart Array 410/i controller) and probably we should/must use it... we ...
-2
votes
1answer
38 views

Data recovery from deleted raid array

Hello I deleted a raid 1 array on a hp b110i and I wanted to know if it is possible to recover the data. Also if Windows server was on the array that was deleted can it be recovered. Thanks
0
votes
2answers
2k views

What does this mean: “SATP VMW_SATP_LOCAL does not support device configuration”?

Can anyone tell me what this means in ESXi 5.1?: SATP VMW_SATP_LOCAL does not support device configuration I've googled it and I get a lot of results, but as yet all the pages that contain the ...
1
vote
1answer
38 views

HP ML350 Gen8: error erasing disk cciss/c0d0 on PXE

I Have a ML350 Gen8, that on first PXE Boot, will ask me whether I am sure I want to erase raid controller cciss/c0d0 giving me an option of Yes | No. This only happens when the disks are brand new ...
1
vote
2answers
58 views

Random 0x0000007B BSOD, Windows Server 2008 R2 on HP Server

The server at my company has been acting strange for as long as I know. Since it is a production server, we rarely do a complete shutdown/restart, but when we do, at random times we got a BSOD for ...
2
votes
3answers
899 views

why hpacucli doesn't see my controller? “Error: No controllers detected.”

On an HP DL120G7 with HP P410, per some suggestion on a blog, I've installed the latest version of hpacucli from http://downloads.linux.hp.com/SDR/downloads/ProLiantSupportPack/Debian/pool/non-free/ ...
4
votes
1answer
29 views

HP DL180 G6 amber light but drive is OK

We have an HP DL180 G6 with 25 SFF SATA drives, running 64-bit Debian Linux. A drive recently failed, so we replaced the failed drive with a new, identical part from HP. The disk controller rebuilt ...
3
votes
1answer
32 views

HP ADU report information. Where is it stored?

I'm working on something but I'm a bit stuck. If I could figure out where certain information that ADU looks at is stored on Windows Server (2003 & 2008), I'd be in great shape. I primarily want ...
13
votes
3answers
3k views

What happens when the USB key or SD card I've installed VMware ESXi on fails?

An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed :( I encountered some ominous looking messages on the vCenter console and in the HP ProLiant ILO event ...
1
vote
1answer
23 views

apt warnings with HP SDR/MCP repo on Ubuntu

I'm using the HP SDR system (MCP specifically) for Linux packages to manage the HP hardware RAID, iLo, etc. The kernel drivers for the hardware are upstream, so these are just management utilities. ...
0
votes
1answer
42 views

HP ProLiant DL380 added disks, but FreeNAS doesn't detect them

I have a HP ProLiant DL380 server and just inserted some extra disks (everything is hot swap), but the server doesn't seem to detect them. I tried camcontrol rescan all, but to no avail, it is just as ...
-3
votes
1answer
23 views

hp dl140 g3 how to repair after failed bios update

During updating bios to the new version (1.18) i got an error that computer can't read rom file. Then after reboot server did not start. Actually it starts but does not show anything, screen is blank, ...
0
votes
1answer
85 views

Repair HP SmartArray p410i

i have a hp proliant server and in the last 4 years i never had a single problem with it. but yesterday i found out that i cant remotely login to my server so i went over and found that ONE of THREE ...
1
vote
2answers
92 views

Is necessary to upgrade HP ProLiant server firmware before hardware upgrade?

I have a HP ProLiant server and I'm planning to expand the RAID capacity. I never upgrade the firmware of anything. Can I add the new disks without the firmwares upgrade or it is absolutely necessary ...
0
votes
1answer
108 views

Kernel panic after boot Centos 6.5 HP DL320 B120i HPVSA

Im working with a new HPDL320 micro server (gen8-2) with a HP Dynamic array B120i My problem is after the setup. I provided the DiskDrive to the installer and everything is fine. at first i used kick ...
1
vote
1answer
97 views

HP DL180 G6: where is temp sensor #21

With the warmer summer days starting to hit, my server is increasingly going into thermal protection shutdown due to temp sensor #21 reaching critical level (58*C), as reported in ILO. The fans are ...
0
votes
1answer
45 views

ProLiant DL120 G7 manually increase fan speed

Because of the applications wich are running on my ProLiant DL120 G7 it has usually high cpu loads. That is no problem, all running very well. But the CPU temp hits 75 degree celsius, and the fan's ...
5
votes
1answer
199 views

ESXi v5.5 is having random crashes

HW: Type: HP Proliant ML350 G5 RAM 22GB CPU 1 x Intel Xenon E5405 2.00GHz OP: ESXi 5.5 just updated from 5.1 to try and fix the crashes occurring on ESXi 5.1 on same hardware. I'm trying to find ...
1
vote
5answers
857 views

CentOS Installation on a Cisco MCS 7800

I'm having some problems installing CentOS 5.5 Final (i386) onto my server, a Cisco MCS 7800. The problem comes very early into the installation. When the welcome screen comes up and gives you the ...
1
vote
1answer
52 views

Upgrade the firmware of SAS HDD on DL380 G5?

I have a DL380 G5 server with 146GB single-port HDD (DG146ABAB). The HP Storage Array P400 controller is saying that firmware should be upgraded on these drives. I am running VMware ESX 5.1 (no ...
2
votes
1answer
44 views

HP SATA Hot Plug Activity Light & B120i Array Controller

The activity rings on both of my hot plug drives rotates continuous (they are in RAID 1 configuration). The drive status on both is solid green. Is this normal? The iotop command is showing no ...
3
votes
1answer
45 views

HP ProLiant DL320e G8 v2 - USB2.0 during POST

Initially my USB2.0 ports were working during POST (and boot). However, now they appear not to be. I first noticed this when I could not access the RBSU by pressing F9 during POST. Then found that I ...
0
votes
1answer
70 views

How to set two RAID1 on the HP SA-E200i controller?

I have an HP ML350 G5 with a RAID 1 between two SAS disks. I want to add 2 extra disks and configure a new RAID 1 separated from the other one. Reading this topic Multiple RAID arrays on E200i it ...
3
votes
3answers
885 views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) ...
0
votes
2answers
73 views

RAID Configuration & File System - What to RAID 1 and what to RAID 0 [closed]

I recently received my first server - it is a HP ProLiant 320e G8. I've installed Debian Wheezy on it. I had to disable the HP Smart Array controller (B120i) because it was creating problems with the ...
0
votes
1answer
40 views

HP Server Proliant ML110 G7, with 2GB base memory need to add another 4GB memory

having problems adding a new 4GB DIMM. On server memory#1 2GB 2rX8 PC3-10600E 9-11 ECC DIMM new memory #2 4GB PC3-10600 Reg Cl9 240 ECC - pin DIMM Im following the memory secuence by placing the #1 ...
1
vote
2answers
100 views

HP Server with P420i - Migrate to RAID 5 Error

I have an HP DL360 G8 with a Smart Array P420i with 3 physical drives, currently setup RAID 0, I would like to migrate to RAID 5. When using the Smart Storage GUI when I attempt to migrate the ...
2
votes
0answers
60 views

ssh to ILO on a DL380 gives key_verify failed for server_host_key

When I try to do connect to the ILO 4 of a DL380 I get the following error: ssh -vvv ilo@me2_ilo OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data ...
10
votes
3answers
998 views

Force renegotiation of PCI Express link speed? x2 card reverts to x1 width

In an effort to circumvent compatibility and cost barriers to using SSD drives with newer HP ProLiant Gen8 servers, I'm working to validate PCIe-based SSDs on the platform. I've been experimenting ...
2
votes
2answers
112 views

Email notifications about hardware RAID status

I have a server with HP Smart Array hardware RAID controller. To monitor its status, I use cpqarrayd. /etc/default/cpqarrayd contains DAEMON_OPTS="-t localhost:162" to send SNMP traps when something ...
1
vote
1answer
1k views

P420i Array Management in ESXi 5.5

I have a HP 380p Gen8 server with ESXi 5.5 running on it and HP Smart Array P420i. I've installed 4 new hard disks on it and want to put them in a RAID 6 array (Although RAID 10 would be OK too). ...
2
votes
1answer
84 views

HP Proliant DL380 G3 not booting. Error “1611 fan 7 not present” after changing power supply

I inherited an HP proliant DL380 G3 some years back and it's been working faithfully as a games/web/build server. At some point during the past year where I haven't been using it the power supply ...
2
votes
1answer
81 views

Best practice on hot-swapping disk

I've been putting myself to find an learn more about the product before posting a question. Well, I've tried my luck and didn't got a proper answer to my questions. So I'm posting it here. Had an ...
3
votes
1answer
107 views

In a HP server, can low voltage DIMMS and standard voltage DIMMs be mixed?

We are adding RAM to a HP Proliant DL380 G7 and were shipped standard voltage DIMMS. We have pre-installed some low voltage DIMMS. Is it acceptable to mix DIMM voltage in general? Is it advised? A ...
3
votes
1answer
219 views

DDR3 10600 memory running at 533mhz

I bought a second-hand HP ProLiant DL160 G6 a year ago with 48GB configured in it. I discovered checking with cpu-z and doublechecked with speccy the memory runs at only 533Mhz. I checked the ...
2
votes
2answers
119 views

How to power on/off multiple HP proliant 380 G5 at once?

First of all, excuse my non acquaintance in IT, because I'm not an IT person at all. I just installed a small render farm composed of 16 HP proliant 380 G5 and 10 Bull Novascale R2 (supermicro based ...
1
vote
1answer
185 views

Server 2012 R2 - Locked HD

HP Proliant Microserver Gen8; Server 2012 R2; Three 1TB SATA Harddrives, two arrays: 1 Raid 0 OS drive, 2 Raid 1 Data drives "The drive where Windows is installed is locked. Unlock the drive and try ...
2
votes
2answers
146 views

Combining SSD and HDD in HP dl380p?

I´m planning to buy a dl380p with 25 sff slots with 2 ssd:s raid 1 and 10 hdd:s raid 5, having room for 13 more hdd:s in the future. Is this possible or do I need two raid cards?
2
votes
2answers
421 views

iLO from iPhone

Does anyone know of an iPhone app that could interrogate iLO and present a summary of box's health information? A thin client that talks to another component that in turn talks to the iLO would work ...
0
votes
1answer
1k views

Entering BIOS via HP iLo2 remote console

I want to enter BIOS remotely via HP iLo2 remote console. However, I tried to press F8,F10,Esc-8 and Esc-10. None of them works. Could someone teach me how to do so? Thank you. Regards, yuwen
1
vote
1answer
85 views

Access RBSU on ML350 G6 remotely

We have a remote server having issues and the HP Support guy suggested to "Disable No-Execute Memory Protection in the server BIOS." This is easy if you have the server onsite and there are many ...