Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

2
votes
2answers
2k views

HP Proliant DL120 with 3rd party 4Tb drives not showing full capacity

We've purchased a HP Proliant DL120 G7, which has an onboard Smart Array B110i controller. In the server, we've bought 4 x Hitachi 4Tb SATA drives, mounted them in HP drive caddies and installed them ...
-1
votes
1answer
45 views

Can a 69,85 cm hp ssf proliant sit in a 800mm rack.

Hi can a hp proliant that is specified to be 69,85 cm in length fit into a 800mm closed rack. No air holes at the front of the rack. But there is a cooling unit attached to the rack. There will be a ...
2
votes
1answer
3k views

HP ProLiant DL380 G7 servers will not POST

We have just received 2 HP DL380 G7's from our DR site. They have been running fine at the site for some time but we have tried to power them up in our DC and they will not post. We get a very brief ...
2
votes
1answer
62 views

HP ProLiant Server HDDs - Buy Spare Parts vs. Retail

sometimes i have to upgrade HP Servers. For example when they get a new "job" to do. So lets say i need some more HDDs for an DL360 G7 Server. If the Server has an active HP Care Pack, does it matter ...
3
votes
2answers
581 views

HP DL380G6: Where is the Temp. Sensor #29 (System Zone)?

The Temp. Sensor #29 of my HP DL380G6 seems to give me a wrong number. It says that the temperature is more than 50C (Caution: 60C, Critical: 65C) while the actual value is 13C. And I think it may be ...
2
votes
1answer
208 views

HP DL585 G6 and PCIE SSD

We recently acquired a HP DL 585 G6, fully populated with SAS drives etc, we want to use a PCIe SSD and have brought an Asus RIADR Pcie SSD however the bios fails to recognize this, can anyone suggest ...
3
votes
1answer
625 views

Very slow disk performance on HP P410 with RAID1+0

I have HP Microserver N54L, until recently i have used integrated software raid without problems. I have 2x WD Black and 2x WD Red (non-pro) disks for my raid array. I also have SSD directly on the ...
4
votes
1answer
150 views

Batch configure HP ILO from laptop

I need a method of setting over a thousand Ilo's on our HP DL360p Gen 8 servers (With hundreds more on the way!) Our environment doesn't allow for the use of any automatically assigned address such ...
2
votes
1answer
286 views

RAID5 array Ready for Rebuild

I've inherited administration of a server with a RAID 5 array. We have a damaged database on the array that is just over half the allocated size, so makes recovery impossible. I recently changed the ...
4
votes
1answer
90 views

SLES 10 SP4 (x86_64) - HP Proliant DL380 G4 - Becomes unresponsive randomly

Had the misfortune of upgrading a HP Proliant DL380 G4 from SLES 10 SP2 (i586) to SLES 10 SP4 (x86_64). Although the installation completed smoothly, the server became unresponsive after a couple of ...
4
votes
1answer
179 views

Heat generated by a HP ProLiant DL380p Gen8 entry EU servers

I have to buy a stand alone server rack to be placed in a machine room. The temperature can reach 30°C in the room (I have no choice with regards to the location). In order to correct for this I will ...
1
vote
1answer
76 views

HP ProLiant dl360 G4 with external backup

We are running a HP Proliant DL360 G4 with external HP Storageworks Ultrium 960 tape drive attached at the moment. Unfortunately the tape drive failed over the weekend and we are looking to upgrade ...
7
votes
7answers
6k views

Can I just remove a disk from a live RAID 1 array?

I've read the story about the manager taking out a disk from a RAID 5 array, and then a second one, but I’d just like to try out for myself what happens when I simply disconnect a disk from a live ...
2
votes
1answer
4k views

Network boot from a non-default NIC on a HP ProLiant G7 server

I need to force a ProLiant DL380 G7 server to PXE boot from a non-default (not Port 1) NIC. So far I was unsuccessful in finding out how to do this, or if it's even possible. I will be very grateful ...
1
vote
1answer
130 views

How to install Windows Server 2003 on HP Proliant DL360 G4

I have an HP Proliant DL360 G4, with the 5 working SCSI drives and one broken. I would like to install Windows Server 2003 and have an .iso installation disk. When it try to boot, it starts Caldera ...
5
votes
3answers
559 views

Floppy power to PCI-E card in DL380 G5

I have an HP DL380 G5 server and a PCI-E card that I need to use in the server. The problem: the PCI-E card requires additional power from a 4-pin floppy connector, and the HP DL380 G5's PSU has no ...
1
vote
1answer
5k views

HP Smart Array P420i Array Management in ESXi 5.5

I have a HP DL380p Gen8 server with ESXi 5.5 running on it and HP Smart Array P420i. I've installed 4 new hard disks on it and want to put them in a RAID 6 array (Although RAID 10 would be OK too). ...
1
vote
1answer
270 views

Limit on number of raid arrays in a HP P420i

On the spec sheet of P420i HP raid controller, it says the maximum number of logical drives is 64 with 512 mb cache or above. But what is the limit of the number of arrays one can create. For ...
10
votes
4answers
15k views

Incredibly low disk performance on HP ProLiant DL385 G7

As a test of the Opteron processor family, I bought a HP DL385 G7 6128 with HP Smart Array P410i Controller - no memory. The machine has 20GB ram 2x146GB 15k rpm SAS + 2x250GB SATA2, both in Raid 1 ...
1
vote
1answer
176 views

Drive faults not logged in HP IML on RHEL-based ProLiant server

Today I have had disks on two separate HP ProLiant servers go into Predictive Failure. One of these servers runs Windows Server 2008 R2 and one runs Oracle Enterprise Linux 5 (a RHEL5-based distro). ...
2
votes
1answer
322 views

Force RAID 1+0 HP Smart Array to rebuild

I have a RAID10 with status "Ready for Rebuild", but how can I force the rebuild? # hpacucli ctrl all show config Smart Array E200 in Slot 0 (Embedded) (sn: PA6C90N9SW82IU) array A (SAS, ...
-1
votes
1answer
75 views

migrate from raid 5+1 (spare) to raid 50 without losing data on hp p420i smart array

i have a raid 5+1(spare) with 8 disk of 1TB each one. my controller is hp p420i. i want add to my server another new array 5+1(spare) with other new 8 disk to build one array in raid 50 whithout lose ...
1
vote
1answer
150 views

How to activate NUMA in HP Proliant DL580 G5 Server?

Currently I am working on a task regarding one server with NUMA. The OS running on the server is Ubuntu 14.04.1 LTS. The server has 4 nodes of 16 cpus: Intel(R) Xeon(R) CPU X7350 @ 2.93GHz, i.e. each ...
1
vote
2answers
388 views

Can HP Intelligent Provisioning install RHEL using non-HP media? [closed]

HP DL360p Gen8 has built in Intelligent Provisioning OS intallation. Will it work with stock RHEL bought on http://www.redhat.com or I have to buy Linux only from HP directly ? I don't want to buy ...
3
votes
1answer
6k views

CentOS 7 x64 and HP Proliant DL360 G5 SCSI Controller compatibility

I've an HP Proliant DL360 G5 server with two 72gb HDD in RAID and 2 150gb HDD in RAID. I've Windows Server installed on the 72gB HDD and I'm now trying to overwrite it with a fresh installation of ...
1
vote
1answer
202 views

CentOS 7 Install Error: Call to StartServiceByName Timeout

I'm trying to install CentOS 7 on my HP Proliant DL320e Gen8 v2 server. I'm attempting this through the iLO4 IRC and virtual media. I'm booting 'CentOS-7.0-1406-x86_64-Minimal'. I get to the first ...
-1
votes
1answer
101 views

difference between FLR-SFP+ and SFP+? [closed]

What is the difference between FLR-SFP and SFP+? For example what is the difference between cards HP 570SFP+ and HP 570FLR-SFP+? Which one it's better to buy?
6
votes
1answer
2k views

replace controller, add second controller, or use expander?

I have a Proliant DL380 G6 that I am re-purposing as a Hyper-V host for a new, off-site data center that will host our DR services. The server currently has a P410i controller with the 512MB BBWC ...
1
vote
1answer
233 views

Governing fan speed in Linux

We bought an HP ProLiant DL320e Gen8 v2 server at office, to be used to run internal applications under Linux. Our OS choice runs between CentOS 6.5 and openSUSE 13.1, though the server is certified ...
1
vote
1answer
191 views

HP DL380 Gen8 doesn't turn on

We have a HP DL380 Gen8 in one of our data center and it is connected to a UPS, I checked the ILO and know that due to unstable electric powe,r the server has been shutdown with the following error: ...
0
votes
1answer
188 views

HP Proliant DL360 G6 Wont Detect SSD

I have a hp Proliant DL360 G6 It has 4 hard drive slots and I have 2 Intel 80GB SSDs and 1 WD 160GB regular hard drive. I have tried the WD in all 4 slots and each time it detects it and boots right ...
2
votes
3answers
16k views

Device eth0 has different MAC address than expected

I've got a HP Proliant 460c blade server running CentOS 5.x. For some reason CentOS thinks the mac address for ETH0 is something (18:a9:05:71:xx:xc) but I'm not able to find that MAC at all on the ...
1
vote
2answers
990 views

HP Smart Array P822 w. Dual D2700 - cabling for best performance

Reading the D2600/D2700 User guide, there's a section called "Cabling examples", but none of the examples match what we intend to do. I just want to make sure that it makes sense, before we do it. ...
6
votes
1answer
389 views

Replace HP Smart Array E200i without losing data

I've got a Smart Array 200i which seems to have some bad slots (slot 3 and slot 5). It doesn't matter what HD I put in these slots, it keeps telling me the drive is bad. My question is two-fold: Is ...
1
vote
1answer
1k views

Server 2012 R2 - Locked HD

HP Proliant Microserver Gen8; Server 2012 R2; Three 1TB SATA Harddrives, two arrays: 1 Raid 0 OS drive, 2 Raid 1 Data drives "The drive where Windows is installed is locked. Unlock the drive and try ...
4
votes
2answers
284 views

Where do I put the server in a cramped office?

We have very limited options for our first server in our small office and none of them look good. We are buying one HP Proliant ML350 G5. Per the HP power calculator with our system specs, we're ...
1
vote
1answer
587 views

HP iLO 4 & OpenSSL 'ChangeCipherSpec' MiTM Vulnerability

The Nessus scanner is flagging 'High risk with sig 74326' after the latest rule updates to all HP iLO cards. This is specifically about the OpenSSL 'ChangeCipherSpec' MiTM Vulnerability. It appears ...
1
vote
2answers
357 views

Can't get my proliant N54l to boot from USB

I was trying to install ubuntu 14. onto a usb stick. It booted fine from the USB and I went through the process for a while until I got to the partitioning bit, I was thinking maybe the install was in ...
1
vote
1answer
219 views

Setting up multiple HDD's in HP ProLiant MicroServer G7

I have a HP ProLiant MicroServer G7 N54L which came with one 250Gb hdd which I installed Ubuntu on. It also has a 2Tb external USB hdd connected - all this, is working perfectly fine. When I loaded ...
5
votes
1answer
328 views

Identifying what caused a server reboot

I have an HP ProLiant DL380p Gen8 that is running VMWare ESXi 5.5. It has been rebooting itself at seemingly random intervals for the past 24 hours. There is only a single VM running, and even if I ...
1
vote
2answers
186 views

Unsupported Storage Connection Detected on HP DL380 Gen8

I'm hoping this is the right place to ask. I recently received a new HL DL380 Gen8 server, on which I want to install Server 2012 R2 via Intelligent Provisioning. According to the specifications, ...
0
votes
1answer
3k views

Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When ...
4
votes
3answers
8k views

HP Proliant DL380 G7 won't power on, UID light works, ethernet lights blinking, power button solid orange

Momentary press and long press of power button does nothing. Can get in through iLO but pressing the button there does nothing. This started after our block had a power failure but all our servers ...
-2
votes
1answer
233 views

Server restarted while rebuilding array, what to do? [closed]

It's a HP ProLiant DL380 Generation 7, that has four hard drives, one is dead, I suppose that another one is dead too, but is there any way to force the array to rebuild again? The server has ...
0
votes
2answers
85 views

HP Proliant Standby

I'm working on coordinating a rack with 1 HP Proliant DL580 G5 and 2 Proliant DL380 G4's. Is it possible to induce either of these units into something like a standby mode? I've perused the manuals ...
0
votes
1answer
146 views

HP DL380 G7 Losing Drive Array

I have an HP Proliant DG380 G7 dropping one of it's arrays every hour, on the hour, for 2-5 minutes. The OS is SBS 2011 Standard, the servers runs Exchange, DC, files & Trend WFBS 8. I can watch ...
0
votes
2answers
336 views

HP ML150 G6 upgrading RAM/CPU beyond specs?

I am being told that some limits on some HP servers can be crossed. Do any of you have any experience with that? A ML150/G6 is limited to 48GB RAM but I have been talking to a German company that ...
0
votes
2answers
1k views

Uncorrectable Machine Check Exception on HP DL360 G7

i have about every hour in IML (hplog) from HP DL360 G7 record: CRITICAL: CPU - Uncorrectable Machine Check Exception (Board 0, Processor 1, APIC ID 0x00000003, Bank 0x00000005, Status ...
1
vote
1answer
345 views

HP ProLiant DL380 G6 with 2 x Intel x5650 CPUs

I have an old HP DL380 G6 server, I am trying to upgrade the processor. I added 2x X5650. but each time I powered the server on, the fans stat working loudly and keep like that. the server never never ...
1
vote
1answer
83 views

Wrong keyboard layout with HP RAC and KVM Viewer

I am currently working with a ProLiant N54L Microserver and a HP Remote Access Card. I access the server through my Mabook with a German keyboard layout. On installing Ubuntu, the installation cant ...