Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

-5
votes
2answers
116 views

Drive fault was asserted DELL [closed]

i have a DELL PowerEdge 2950 Server whit raid for 3 HDD. A friend whit a HP Proliant server which has broken, come to my help, to save information from the hard drive only had. When i put on my server ...
3
votes
2answers
1k views

HP DL320e Gen8, 3TB drives, Windows Server 2012 R2 - HDD full capacity alocation difficulties during installation

One interesting task to do but not so easy as i thought. The server is HP DL320e gen8, The main difficulty is with partitioning the RAID1 (2x3TB HDDs) during the installation on 2 partitions (System ...
4
votes
1answer
482 views

HP ProLiant Gen8 Health Agents and EL6.x - cpqHoMibHealthStatusArray has changed to the value: x

I've noticed that my HP ProLiant Gen8 servers report the following message via email to root (or the destination configured in /opt/hp/hp-snmp-agents/cma.conf) upon restart. Trap-ID=11020 ...
0
votes
2answers
812 views

“HP Insight Management WBEM Providers” download

I am trying to query a Proliant Server's health thru Powershell. But I can't find a place to download the HP Insight Management WBEM Providers from here. Is there any other Powershell equivalent of ...
1
vote
1answer
68 views

Sideband on HP ILO2 and initial in-OS setup possible?

Is it possible to configure sideband (ILO being physically accessed from one of the main NICs as opposed to the dedicated ILO NIC) for the ILO2? Also is it possible to configure the ILO2 initially ...
0
votes
0answers
192 views

hp-health install doesn't work on Debian 7 (Wheezy)

I try to install hp-health on my HP ProLiant ML350 G4 server with a Debian 7 (Wheezy) installation. I downloaded the package on : ...
1
vote
1answer
2k views

P420i Array Management in ESXi 5.5

I have a HP 380p Gen8 server with ESXi 5.5 running on it and HP Smart Array P420i. I've installed 4 new hard disks on it and want to put them in a RAID 6 array (Although RAID 10 would be OK too). ...
2
votes
1answer
1k views

HP ILO utility for Ubuntu - hponcfg fails due to missing hp-ilo package

I'm working with an Ubuntu-based system running on an HP ProLiant DL360p Gen8 server. I prefer to install HP's management agents when I can for full hardware monitoring/configuration capabilities. ...
0
votes
1answer
350 views

How to set up direct access storage between a BL460c Gen8 (Win Server 2012) and D2220sb storage blade

I have installed a D2220sb storage blade in a c3000 enclosure. The storage blade's partner device is a HP BL460c Gen 8 Server. How do I setup a direct access storage? I have googled and tried to ...
1
vote
1answer
364 views

Fastest server ram configuration for 48GB?

I have an HP ProLiant DL160G6 server, with 2 CPU's and 48GB ram, with following modules: 4x 8GB Module - DDR3 1066MHz (KTH-PL310Q8/8G) 4x 4GB Module - DDR3 1333MHz (KTH-PL3138/4G) I'm re-purposing ...
26
votes
2answers
890 views

HP plan to restrict access to ProLiant server firmware - consequences?

I've been a longtime advocate for HP ProLiant servers in my system environments. The platform has been the basis of my infrastructure designs across several industries for the past 12 years. The ...
2
votes
2answers
363 views

HP DL380G6 + MSL2024 LTO6 SAS : Which HBA? [closed]

I'm going to upgrade our backup server and I'd like to confirm that the following specs won't choke after the purchase. It'd be great if you could tell me your opinion Our current setup is: HP ...
3
votes
1answer
112 views

Multiple Servers, Multiple Drive Failure within 12 hours?

In the IT world I just won the Lottery Twice.... Today we had a hard drive fail in a raid array. A few hours later we had another drive fail on a different server.... We started checking all the ...
3
votes
2answers
163 views

Which type of RAM we should use? Registered or Unregistered?

We are planning to buy two different servers from HP. They will be used in project where we do lot of statistical analysis and Java development/testing etc. Servers are : a) Part :ML350e 2403 CTO ...
1
vote
1answer
85 views

HP SL250s will not boot from the network, does not appear to DHCP

I have an HP Proliant SL250s Gen8 (right-hand) server which is apparently not able to boot from the network. If I configure the system to PXE boot in the BIOS, or if I hit F12, it does start up the ...
-1
votes
2answers
981 views

Poor SQL performance on HP ProLiant ML310e Gen8 v2 with raid10

I recently bought HP ProLiant ML310e Gen8 v2 server with 8G's RAM and 4 HP 1TB 6G 7.2k rpm SATA (3.5in) Non-Hot Plug MDL HDD disks. It was surprise to me that HP didn't provide debian drivers for ...
1
vote
1answer
582 views

HP ProLiant DL385 G6 - “Fan Solution Not Sufficient” error

I have a HP DL385 G6 that is acting up. Weeks ago it stopped booting with an error of Fan Solution Not Sufficient. The front panel indicating that fans 3 and 4 were down though both these fans are ...
9
votes
2answers
641 views

Are consumer class hard disks okay for zfs?

I just recently bought a new server an HP DL380 G6. I replaced the stock smart array p410 controller with an LSI 9211-8i. My plan is use ZFS as the underlying storage for XEN which will run on the ...
1
vote
2answers
692 views

HP ProLiant DL380e Gen8 server - SPP use

I am planning to install Oracle Linux 6.4 on an HP ProLiant DL380e Gen8 server. I have been advised to use Service Pack for Proliant SSP DVD to install/update the missing utilities drivers for Oracle ...
0
votes
1answer
75 views

HP ProLiant DL380 G4 and G6? [duplicate]

I currently have a rack mount kit for a HP ProLiant DL380 G4 server however we have a HP ProLiant DL380 G6 server, will a rack mount kit for a HP ProLiant DL380 G4 fit a HP ProLiant DL380 G6 server? ...
1
vote
1answer
106 views

Raid 1+0 on HP ML350 G5

I'm trying to setup a Proliant ML350 that has a SmartArray E200i Raid controller. I want to setup RAID 1 but there isn't any option for it, just 0, 1+0, and 5. I only want to use 2 drives since I just ...
3
votes
2answers
1k views

Install Oracle Linux 6.4 on HP ProLiant DL380e Gen8 server

installation does not detect the raid 1 logical drive created from ACU. the installation shows the two 2T disks, and after the installation is complete, I can not boot up to the system. I have been ...
1
vote
2answers
2k views

Cannot install Windows 2012 R2 on HP Blades

I have several HP ProLiant BL460c G1 blade servers where I am trying to install Windows 2012 R2. I was able to get it installed on one but can't get it installed on the rest. They all fail with the ...
5
votes
1answer
690 views

Proliant ML310e Gen8 Smart Array Predicted Failure Issue with SSD

This is a question related to this one: Third-party SSD solutions in ProLiant Gen8 servers but not covered by the question or the answers. I have an OCZ 120 gig SSD as system drive on a Proliant ...
1
vote
2answers
367 views

Check if an iLO board installed on a Windows machine

How can I check if a iLO-Board is installed on a Windowsmachine? I would like to do it via a script (python prefered). I thought about checking the connectionport. E.g.: If the iLO is connected via ...
3
votes
1answer
61 views

LFF in HP DL360p, how and is it a good idea?

I need a new server with 10 Tb storage and was looking at a DL360p with a D2600. It would do the trick, but it´s quite expensive and I´m looking for alernatives. 4 x 4 Tb would be enough, both for ...
1
vote
2answers
599 views

Windows Server 2012 gives error on installation

I have a HP proliant gen8 server on which i want to install windows server 2012. This is supposed to be a file server hence it has 8x1Tb physical drives in it. The problem is after creating a ...
1
vote
2answers
174 views

What “PAL Shim AllocRequest returning NULL” meens?

On a HP DL380e Gen8 with Dynamics Smart Array and SAS RAID installed I try to install Centos, after load the RAID Driver from HP Support Site I can access the RAID and do the installation. The ...
3
votes
1answer
350 views

Format SAS drives HP DL360G6

hoping you can point me in the right direction here. I scored an older HP DL 360G6 and have been having issues installing ESXi. After a bit of searching around a few people suggested completely ...
2
votes
4answers
490 views

Suitability of DL380p-Gen8 + D2700 for SQL 2012 Standard Edition

A question for those who know about HP server performance and SQL... I am trying to spec a suitable server that has the following requirements: Run SQL 2012 Standard Edition (I cannot get approval ...
2
votes
2answers
346 views

Detect HP ML370 G5 Bad disk in RAID0

I have one HP ML370 G5 server. Which has four 146GB SAS disks and two 300GB SAS disks that are configured as RAID 0. I have encountered a problem with one of my disks. The windows server event viewer ...
2
votes
1answer
2k views

HP ProLiant DL380 G7 servers will not POST

We have just received 2 HP DL380 G7's from our DR site. They have been running fine at the site for some time but we have tried to power them up in our DC and they will not post. We get a very brief ...
10
votes
2answers
2k views

SSD (Intel 530) read/write speed very slow with RAID 10

Explanation: We have a Server: Model: HP ProLiant DL160 G6 4 x 240GB SSD (RAID-10) 72GB DDR3 RAM 2 x L5639 HP P410 RAID Controller (256MB, V6.40, Rom version: 8.40.41.00) SSD drives are 4 brand ...
1
vote
2answers
2k views

Is there a better workaround or solution to boot a Proliant DL380 Gen8 from USB DVD drive than “Restore Default System Settings”?

An HP Proliant DL380e Gen8 BIOS P73 (03/01/2013) using iLO4 suffers from USB CD/DVD drive boot issues after a reboot, as described in HP Advisory c02707749. External USB DVD drive details are: ...
2
votes
0answers
356 views

How to increase CPU core speed of a guest to maximum of Citrix Xenserver Host

There is a Citrix XenServer 5.5 (HP ML370 G5, Xeon 2GHz) on this Server there is a Windows Guest (Windows 2008 R2 x64) under Properties I set 4 CPU Cores with max prio. But if I check with CPU-Z the ...
10
votes
3answers
1k views

Force renegotiation of PCI Express link speed? x2 card reverts to x1 width

In an effort to circumvent compatibility and cost barriers to using SSD drives with newer HP ProLiant Gen8 servers, I'm working to validate PCIe-based SSDs on the platform. I've been experimenting ...
1
vote
1answer
523 views

Add two disks to existing mirrored logical drive using hpacucli

I have an ESX-server with an existing disk array which consists of 6 disks that are mirrored: Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 1 ...
0
votes
1answer
120 views

Which controller for external SAS tape drive

We're about to buy an external LTO-4 tape drive for our HP DL380g6 server, and since SCSI is on the way out, we'll buy a SAS drive, probably the HP StoreEver LTO-4 Ultrium 1760 SAS External Tape Drive ...
1
vote
0answers
250 views

HP ProLiant DL120 G7 boot stuck due to disabled raid controller

After I have enabled RAID I disabled the B110i raid controller in the BIOS. Now it is stuck on a POST message and I can't do anything. Pressing F9 to re-enter the BIOS settings does nothing. It ...
3
votes
1answer
612 views

ESXi 5.5 on HP ProLiant DL380 G7 Server

I want to install ESXi 5.5 on a HP ProLiant DL380 G7 Server but it doesn't see any disks. Any idea why? I don't see any option in the BIOS regarding storage. I have 8 SATA drives and want to use them ...
1
vote
1answer
945 views

HP ProLiant DL380 G6 server error code: 347 of array controller

I have got a brand new hp ProLiant DL380 G6 server with embedded smart array P410i controller, I got 146 GB SAS drives and wanted to change them with 300 GB SAS drives before installation. Now, we ...
0
votes
1answer
310 views

Hard drives indication with controller MegaRAID SAS 9261-8i on HP Proliant DL320e Gen8. Is it possible?

Give me advice, please. My situation: There're the server HP ProLiant DL320e Gen8 and MegaRAID SAS 9261-8i RAID Controller. I installed Controller into server and I reconnected Mini-SAS cord from ...
0
votes
0answers
83 views

HP DL160G6 bios update fails

I tried to update the BIOS from my HP DL160G6's. Unfortunately the Windows update degraded my BIOS version from 243 to 237. But when I try to upgrade both servers to version the update fails. First I ...
13
votes
3answers
4k views

What happens when the USB key or SD card I've installed VMware ESXi on fails?

An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed :( I encountered some ominous looking messages on the vCenter console and in the HP ProLiant ILO event ...
1
vote
1answer
370 views

Red Hat 5.10 fail to boot on HP DL380 G7

I'm trying to install Red Hat 5.10 x86_64 on an HP DL380 G7 server, everything goes fine and I get the successful installation message but don't know why the server fails to boot! I've done the ...
3
votes
1answer
258 views

DDR3 10600 memory running at 533mhz

I bought a second-hand HP ProLiant DL160 G6 a year ago with 48GB configured in it. I discovered checking with cpu-z and doublechecked with speccy the memory runs at only 533Mhz. I checked the ...
2
votes
3answers
1k views

why hpacucli doesn't see my controller? “Error: No controllers detected.”

On an HP DL120G7 with HP P410, per some suggestion on a blog, I've installed the latest version of hpacucli from http://downloads.linux.hp.com/SDR/downloads/ProLiantSupportPack/Debian/pool/non-free/ ...
0
votes
2answers
456 views

HP Proliant DL320 G5 Memory Registered or Unregistered?

I have an old HP Proliant DL320 G5 with 2x 1GB of RAM. I would like to swap out the old ram and install 4x 2GB of RAM to bring it to the max capacity. The manual calls for PC2-5300 unbuffered modules. ...
-4
votes
2answers
263 views

Hardware RAID0: what happens when a drive fails?

With a hardware-based RAID0, what happens when a drive fails? For example, on brand name servers like HP DL120G7 with HP P410, when running FreeBSD on a zfs with a zpool mirror, or DragonFly BSD with ...
1
vote
1answer
351 views

HP ProLiant DL180 G6 SSD upgrade (sata 3)?

We've currently got a HP ProLiant DL180 G6 server with a Smart Array P410i raid card, and 8 HDDs running off it. We also just bought a new SATA Intel SSD drive to expand the server, that we're ...