Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

0
votes
1answer
124 views

Network boot from HP DL380 G7 using PCI quad port Intel NIC

I have a HP DL380 G7 server with a quad intel expansion card in slot 3. I can't seem to find anywhere in the iLO/BIOS to tell it to boot from one of these expansion interfaces - is this even ...
8
votes
2answers
4k views

Third-party SSD solutions in ProLiant Gen8 servers

I was wondering if anyone had any specific experience using Intel DC3700 SSDs (or similar) in the HP (DL380p) Gen8 servers? I'm upgrading a set of database servers that use direct-attached storage. ...
2
votes
1answer
429 views

What kind of memory for Hp Proliant dl380 g4

I am trying to figure out what kind of memory this Hp Proliant DL380 g4 needs. I can see that it will take PC2-5300 ddr2 memory from this HP article ...
1
vote
0answers
169 views

Proliant dl 180 g6 install normal SATA drives

I have a Proliant DL180 G6 with problems in the P410 controller. I want to instal normal SATA drives in the server. I see the mother has 4 SATA slots but I can´t find how to power the SATA drives ...
2
votes
1answer
3k views

Installing Ubuntu 12.04 on HP Proliant DL380e with 1TB SAS Drive

I have an HP Proliant DL380e with a 1TB SAS Drive and I am trying to install ubuntu server 12.04 on it. I have created a RAID array using Array Controller Utility and had a RAID0 logical volume ...
2
votes
2answers
278 views

Reboot server while HP SmartArray P410i array transformation?

Just added two more drives to a 4 drives RAID 1+0 array on my ML350 G6+SA P410i+FBWC. I also have to add an expander card (yes, I should have begun with it :/ ) but the array expansion takes a long ...
3
votes
2answers
412 views

RHEL 5.5 server has most devices listed as “Unknown Device”

When I run lspci on my RHEL 5.5 Server (HP ProLiant DL360p Gen8), most items look like this: 00:03.3 PCI bridge: Intel Corporation Unknown device 3c0b (rev 07) 00:04.0 System peripheral: Intel ...
2
votes
1answer
142 views

Upgraded DL380 G2 To Windows Server 2008 and cannot locate network drivers - any advice?

I was able to successfully load Windows Server 2008 on an HP DL380 G2, which is not officially supported by HP. It seems to be working perfectly fine, except for the fact I cannot locate any network ...
5
votes
1answer
713 views

HP Proliant ML350 G5 SAS HDD

I am getting problem in HP Proliant ML350 G5. Some few days back one of the SAS HDD failed. It was 146GB SAS 15krpm HDD. We got new one which is 146GB SAS 10k rpm HDD. Its on RAID 1(1+0) ...
4
votes
1answer
311 views

DL385 G2 powering off after some time

I have one DL385 G2 server that since Thursday is not able to power on properly. I can't figure out what's the problem, since there is no indication neither in iLO 2 log, IML, nor any red/amber LED on ...
0
votes
2answers
614 views

HP ProLiant DL320 G5 No Video Output, No Error LEDs, Swapped Motherboard, Same Issue

I have a HP ProLiant DL320 G5 Server that we have swapped out the motherboard with a working one, tried narrowing down removing different memory sticks, swapped out the onboard battery. I have a ...
0
votes
1answer
27 views

How do you get into the interface on a ProLiant DL 366 G7 and set RAID? (Smart Array 410 P)

How do you get into the interface on a ProLiant DL 366 G7 and set RAID? Into the Smart Array P410 controller?
1
vote
4answers
391 views

FATAL: Error inserting acpi_cpufreq

Trying to see how to force CPU to run at higher freq on a HP ProLiant system with SLES 11 SP2. /# modprobe -vv acpi-cpufreq insmod ...
2
votes
1answer
747 views

hp DL380 G4 won't boot with disk plugged into front USB

We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the ...
1
vote
0answers
51 views

Getting iLO logs for a specific period

I am fetching iLO event logs remotely using cpqlocfg.exe and script Get_iLO_Log.xml. But this gives complete event logs and there is no parameter that can be set to get the logs only for a specific ...
0
votes
0answers
133 views

Configuring HP Proliant iLO using hponcfg

I am configuring an iLO using hponcfg by logging into the machine remotely and running hponcfg with scripts Mod_Directory.xml and then with Mod_Network.xml. I am enabling the DHCP on the device. But ...
0
votes
2answers
1k views

data lost with RAID5 on proliant DL360 when drives fail

For some reason the Array Controller on my Proliant DL360 G6 couldn't recognize 2 of the 6 750GB drives I am running in a RAID 5 configuration with VMware ESXi 5.1. When I rebooted the server I chose ...
2
votes
1answer
1k views

XFS slow performance on LVM'ed RAID, faster when RAW or non-LVM

longtime user of this website, first time poster. I have a weird issue with a server I am setting up. It's for a filesharing-type website, so fast IO and plenty of capacity are the requirements. OS ...
-1
votes
2answers
257 views

How to easily read IPMI data from a HP ML110 G4 server?

is there a windows application to read the IPMI data on my HP ML110 G4 server? I need to monitor the temperature levels. I can view raw IPMI data in the BIOS, but this is no use while the server is ...
2
votes
2answers
979 views

Can I put in laptop 2.5" SATA drives into an HP ProLiant DL380 G5?

I have an HP DL380 G5 server and I was wondering if can I put in standard notebook 2.5" SATA drives? In the front where the drives go, the SATA connections dont seem to fit.
2
votes
1answer
74 views

Rackmounting a tower chassis HP BLc3000 Blade System

Ok, so we have a HP BLc3000 that we are bringing in from a remote office to our central datacentre, its currently in its purchased tower / pedestal configuration (with the wheels and all that) Is it ...
3
votes
1answer
667 views

Flashing the BIOS on a DL380 G5 without Windows

This page has installation instructions for an update to the BIOS. Assuming our G5 does not have Windows on it, can someone enlighten me as to how this works? Does it make a bootable USB stick for ...
2
votes
1answer
285 views

CentOS 6.4 lock-up …no explanation

I have a CentOS 6.4 server on an oldish box (HP ProLiant ML350 G4) that I've recently installed on and it's been up less than 24 hours. It has 6 146 GB 10k SCSI drives in RAID 1+0 that are also brand ...
3
votes
1answer
2k views

HP DL380 G6: Where is Temperature Sensor 30 (I/O Board Zone)?

In ILO2 firmware 2.15 on my DL380 G6, the Temp 30 sensor (location: I/O Board Zone) indicates 65C and my fans are running at 78% capacity. The Caution level for this zone is 110C, and the Critical ...
-5
votes
2answers
382 views

P812 “forgot” RAID6 - can't see disks at boot time in ORCA

We have an MSA60 with 12x4TB non-HP issue Seagate Constellation ES.3 drives connected to a P812/FBWC, on which I created a RAID6 over all of those disks with hpacucli and started to copy data on them. ...
1
vote
1answer
137 views

HP DL380G5 with APC SC1500 UPS — transfer time failure

I have 2 of these things: APC SmartUPS SC1500 (220v). My Proliant G5 DL380 PSUs seem to really hate them. This is what happens when UPS switches to battery (PSU2 is plugged into the SC1500): iLo IML ...
1
vote
1answer
60 views

“Discovery failed” message trying to install hp ProLiant Support Pack 8.30 on DL380 G4

I'm getting the exact screenshots shown here, and followed the directions there despite the model difference. The BIOS had a different serial number for some reason, but it was an alphanumeric string ...
8
votes
1answer
2k views

Is there a way to view an HP ProLiant server IML log from within ESXi?

I'm investigating a system outage on an HP ProLiant DL360 G7 server running VMware ESXi 5.1. While I'm a huge advocate of installing the HP-specific management agents for ESXi or using the ...
2
votes
4answers
6k views

HP ProLiant ML310e Gen8 early system initialization hangs on 90%

just unboxed a brand new HP ProLiant ML310e Gen8 Server. I can reach the iLO webinterface but the Server hangs on the early system initialization on 90 % with the status code 0114. I did not find any ...
-2
votes
1answer
284 views

HP DL360p Gen8 for low latency trading - what to upgrade? [closed]

I'm using HP DL360p Gen8 for low latency trading (but not ultra-low-latency!). It means that i'm working in frame about "10+ microseconds" and i don't care about "1-5 microsecond" or nanoseconds. I ...
2
votes
1answer
818 views

How do I disable “Processor Power and Utilization Monitoring” on an HP ProLiant server?

I'm tuning my server for low-latency The guide suggests to disable this option "Processor Power and Utilization Monitoring" because: Disables iLO Processor State Mode Switching and Insight Power ...
2
votes
2answers
807 views

vSphere ESXi - Use both HP ProLiant DL360 G7 and DL360p Gen8 in the same cluster

I have vSphere cluster with few HP DL360 G7 servers, with Intel X5675 processor. I want to buy new server, HP 360 Gen8 with E5-2600 processors. Can I have this 2 kinds of servers in the same ...
-5
votes
1answer
55 views

How to configure a server for self hosting? [closed]

I have a machine, the guy I got it from gave me this specifications : HP Server/Workstation Proliant DL360 G5 DualCore Intel Xeon 5130 4096 Byte 292,00 GByte The building I want to set it up to, ...
0
votes
1answer
191 views

Refresh a specific page in ilo 4

I use iLo 4 for my HP dl380 gen 8. I access iLo webpage using internet explorer 10. (Although I would gladly use another browser if anyone can recommend a better one for iLo access). How can I ...
2
votes
1answer
998 views

BL460c G7 blade OS install

I have an HP c7000 enclosure with a BL460c G7 blade. I need to install Windows server OS on it. I have a problem with iLO, so it will not mount the ISO in the remote console. Tried using both Active-X ...
0
votes
1answer
222 views

HP DL380 G3 and Ubuntu

I have bought a HP Proliant DL380 G3 and am attempting to install Ubuntu Server 12.04 LTS. My server's got two Ultra320 SCSI HDDs but in the Ubuntu installation process, the OS fails to recognize ...
1
vote
1answer
741 views

HP SmartArray P212 disabled, cache module not attached

I have a DL180 G6 server with Smart Array P212 RAID controller. The server runs under Ubuntu. After an upgrade from Ubuntu 10.04 to 12.04 utility hpacucli (ver. 8.50-6.0) stopped working. The error ...
-1
votes
2answers
198 views

Hyper-V Server 2012 Hardware [closed]

I have an HP ProLiant ML350 G6 that I want to use with Hyper-V Server 2012 to host up to 9 VM's. The server has this specs: 1 x Intel Xeon E5606 2.13GHz LGA1366 (the motherboard supports 2 CPU's, ...
0
votes
3answers
623 views

Graphing temperature over time for HP iLo 4

Server: HP DL380p Gen 8, running latest iLo 4. One sensor, Sensor #25 for the HD Controller, tends to run a bit hot when compared to the other sensors. It tends to read 75 C. Caution temp is 100 C. ...
1
vote
1answer
413 views

HP Proliant DL360 G3: What version of XenServer is supported?

I've spent some time looking, and haven't been able to find a decent HCL for the current and past versions of XenServer. I have 3 HP Proliant DL360 G3's that I want to use for virtualization. They ...
1
vote
4answers
991 views

esxi 5.0 free + ilo3 + hp DL380 G7 = no ability to hardware monitor without HP SIM or vmware non-free?

ok so as stated in the subject line i have an HP DL380 G7 running esxi 5.0 free and an ILO3. Is there any way for me to get some decent monitoring of the hardware without paying any extra money for a ...
3
votes
3answers
884 views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) ...
0
votes
1answer
352 views

hpacucli is unstable - Sometimes finds controller, sometimes not

I try to monitor the RAID-status on my HP ProLiant DL380 G5 with hpacucli 9.20. But, it's acting rather weird. Most of the time, it will return: root@SERVER:~# hpacucli ctrl all show Error: No ...
-1
votes
1answer
36 views

Proliant server ML 370 G4 RAM upgraade

can we use ECC non-registered RAM 667MHz on HP Proliant ML 370 G4?
2
votes
2answers
2k views

Oracle Enterprise Linux installation can't see local disks on HP ProLiant DL360e Gen8

I am installing Oracle Enterprise Linux 5 on HP ProLiant DL360e Gen8. There are 2 300GB disks and they are configured in RAID 1 from ACU. During the installation installator can not see local hard ...
1
vote
1answer
1k views

HP DL360 G7 P410i controller troubleshooting

Server is HP DL360 G7 with P410i disk controller. 2xE5620 CPU's. 16GB RAM. Linux mysql 2.6.32-5-amd64 #1 SMP Mon Feb 25 00:26:11 UTC 2013 x86_64 GNU/Linux (Debian 6.0.7) hpacucli "ctrl all show ...
0
votes
1answer
108 views

Gparted not detecting controller after removing a drive

Ran into a weird scenario. Installed 5 hotswap HDD drives on a HP SmartArray P410 RAID controller running RAID-5. Went into Gparted and created different partitions. Realized one of the drives was ...
3
votes
3answers
142 views

Will adding HD's to a Proliant 350e server invalidate the warranty

We are looking at getting a new file server in the office. When looking at HD's the ones that HP sell are twice or more than just buying a drive and getting a caddy to hold it in the server. When we ...
0
votes
1answer
342 views

HP ML350 G5 Smart Array E200i battery voltage not low

I have a similar problem like this: HP ML350 G5 Smart Array E200i battery error Gets error message that says it is low voltage power on battery. Has measured voltages of the battery and it is exactly ...
1
vote
3answers
1k views

HDD with HP Proliant ML310e

I recently purchased a HP Proliant ML310e off PCNation.com as it seemed like a great deal. Come to find out, when I go to open up the case and install HDDs, the system is equiped with a ...