Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

-3
votes
2answers
2k views

HP ProLiant DL380e Gen8 has high fan speed after installing second CPU

Today I installed a second CPU in our HP ProLiant DL380e Gen8, and after booting the fans all went to 99.96%. This causes the server to make an enormous amount of noise. Could it damage the server? ...
2
votes
1answer
209 views

Installing DIMM modules in HP ProLiant DL180G6 not in recommended order

I have two DL180G6 servers, I used them with 2x2 GB RAM modules, now I'd like to upgrade the memory to 16 GB for each. I have spare 6x2 GB RAM modules per machine (parameters match for the existing ...
3
votes
1answer
4k views

CentOS 6.5 with HP ProLiant DL360e Gen8

I have a chance to install a new HP ProLiant DL360e Gen8 server. There are three hard drives. How do I configure RAID 1 on this type of server. Will RAID already be configured so that it will look ...
1
vote
1answer
678 views

Installing XenServer 6.2 on Proliant DL160G6 freezes during “Installing from base pack”

I'm trying a new install of XenServer 6.2 on an HP Proliant DL160G6 with a HP P410 raid card configured as RAID 5 over 4 drives, with a 256M BBWC. The install starts off properly, but when it gets to ...
3
votes
2answers
589 views

HP DL380G6: Where is the Temp. Sensor #29 (System Zone)?

The Temp. Sensor #29 of my HP DL380G6 seems to give me a wrong number. It says that the temperature is more than 50C (Caution: 60C, Critical: 65C) while the actual value is 13C. And I think it may be ...
3
votes
1answer
148 views

Network card location

I am generally familiar with hpacucli and hpasmcli but how do I determine in which slot a network card is installed? I need to be able to map to and from the slot and the MAC (and from there to the ...
-1
votes
1answer
270 views

HP ProLiant - Does ILO 2 Advanced offer additional SNMP or IPMI features?

We've got ML350 G5 servers with iLO 2 standard license. Does upgrading to higher iLO license will unlock new SNMP or IPMI data registers? If it will, which ones?
3
votes
2answers
161 views

Switch disks between array controllers

I have an HP ProLiant ML 350 G5, which has an HP Smart Array E200i/128 BBWC Controller embedded. This controller manages two arrays (each with three 72 GB disks in RAID 5) This controller has ...
2
votes
0answers
329 views

HP SNMP Traps signalled every 10 seconds for a NIC

I'm trying to setup SNMP traps on my HP DL160 G6 (Xenserver) to notify me whenever I have issues with the server. Following suggestions from this serverfault post, I've installed the HP SNMP agents ...
0
votes
2answers
339 views

HP ML150 G6 upgrading RAM/CPU beyond specs?

I am being told that some limits on some HP servers can be crossed. Do any of you have any experience with that? A ML150/G6 is limited to 48GB RAM but I have been talking to a German company that ...
-5
votes
2answers
241 views

Drive fault was asserted DELL [closed]

i have a DELL PowerEdge 2950 Server whit raid for 3 HDD. A friend whit a HP Proliant server which has broken, come to my help, to save information from the hard drive only had. When i put on my server ...
3
votes
2answers
2k views

HP DL320e Gen8, 3TB drives, Windows Server 2012 R2 - HDD full capacity alocation difficulties during installation

One interesting task to do but not so easy as i thought. The server is HP DL320e gen8, The main difficulty is with partitioning the RAID1 (2x3TB HDDs) during the installation on 2 partitions (System ...
4
votes
1answer
1k views

HP ProLiant Gen8 Health Agents and EL6.x - cpqHoMibHealthStatusArray has changed to the value: x

I've noticed that my HP ProLiant Gen8 servers report the following message via email to root (or the destination configured in /opt/hp/hp-snmp-agents/cma.conf) upon restart. Trap-ID=11020 ...
0
votes
2answers
2k views

“HP Insight Management WBEM Providers” download

I am trying to query a Proliant Server's health thru Powershell. But I can't find a place to download the HP Insight Management WBEM Providers from here. Is there any other Powershell equivalent of ...
1
vote
1answer
83 views

Sideband on HP ILO2 and initial in-OS setup possible?

Is it possible to configure sideband (ILO being physically accessed from one of the main NICs as opposed to the dedicated ILO NIC) for the ILO2? Also is it possible to configure the ILO2 initially ...
0
votes
0answers
248 views

hp-health install doesn't work on Debian 7 (Wheezy)

I try to install hp-health on my HP ProLiant ML350 G4 server with a Debian 7 (Wheezy) installation. I downloaded the package on : ...
1
vote
1answer
5k views

HP Smart Array P420i Array Management in ESXi 5.5

I have a HP DL380p Gen8 server with ESXi 5.5 running on it and HP Smart Array P420i. I've installed 4 new hard disks on it and want to put them in a RAID 6 array (Although RAID 10 would be OK too). ...
2
votes
1answer
2k views

HP ILO utility for Ubuntu - hponcfg fails due to missing hp-ilo package

I'm working with an Ubuntu-based system running on an HP ProLiant DL360p Gen8 server. I prefer to install HP's management agents when I can for full hardware monitoring/configuration capabilities. ...
0
votes
1answer
599 views

How to set up direct access storage between a BL460c Gen8 (Win Server 2012) and D2220sb storage blade

I have installed a D2220sb storage blade in a c3000 enclosure. The storage blade's partner device is a HP BL460c Gen 8 Server. How do I setup a direct access storage? I have googled and tried to ...
1
vote
1answer
445 views

Fastest server ram configuration for 48GB?

I have an HP ProLiant DL160G6 server, with 2 CPU's and 48GB ram, with following modules: 4x 8GB Module - DDR3 1066MHz (KTH-PL310Q8/8G) 4x 4GB Module - DDR3 1333MHz (KTH-PL3138/4G) I'm re-purposing ...
26
votes
2answers
1k views

HP plan to restrict access to ProLiant server firmware - consequences?

I've been a longtime advocate for HP ProLiant servers in my system environments. The platform has been the basis of my infrastructure designs across several industries for the past 12 years. The ...
2
votes
2answers
668 views

HP DL380G6 + MSL2024 LTO6 SAS : Which HBA? [closed]

I'm going to upgrade our backup server and I'd like to confirm that the following specs won't choke after the purchase. It'd be great if you could tell me your opinion Our current setup is: HP ...
3
votes
1answer
131 views

Multiple Servers, Multiple Drive Failure within 12 hours?

In the IT world I just won the Lottery Twice.... Today we had a hard drive fail in a raid array. A few hours later we had another drive fail on a different server.... We started checking all the ...
3
votes
2answers
225 views

Which type of RAM we should use? Registered or Unregistered?

We are planning to buy two different servers from HP. They will be used in project where we do lot of statistical analysis and Java development/testing etc. Servers are : a) Part :ML350e 2403 CTO ...
1
vote
1answer
116 views

HP SL250s will not boot from the network, does not appear to DHCP

I have an HP Proliant SL250s Gen8 (right-hand) server which is apparently not able to boot from the network. If I configure the system to PXE boot in the BIOS, or if I hit F12, it does start up the ...
-1
votes
2answers
2k views

Poor SQL performance on HP ProLiant ML310e Gen8 v2 with raid10

I recently bought HP ProLiant ML310e Gen8 v2 server with 8G's RAM and 4 HP 1TB 6G 7.2k rpm SATA (3.5in) Non-Hot Plug MDL HDD disks. It was surprise to me that HP didn't provide debian drivers for ...
1
vote
1answer
1k views

HP ProLiant DL385 G6 - “Fan Solution Not Sufficient” error

I have a HP DL385 G6 that is acting up. Weeks ago it stopped booting with an error of Fan Solution Not Sufficient. The front panel indicating that fans 3 and 4 were down though both these fans are ...
10
votes
2answers
950 views

Are consumer class hard disks okay for zfs?

I just recently bought a new server an HP DL380 G6. I replaced the stock smart array p410 controller with an LSI 9211-8i. My plan is use ZFS as the underlying storage for XEN which will run on the ...
1
vote
2answers
1k views

HP ProLiant DL380e Gen8 server - SPP use

I am planning to install Oracle Linux 6.4 on an HP ProLiant DL380e Gen8 server. I have been advised to use Service Pack for Proliant SSP DVD to install/update the missing utilities drivers for Oracle ...
0
votes
1answer
88 views

HP ProLiant DL380 G4 and G6? [duplicate]

I currently have a rack mount kit for a HP ProLiant DL380 G4 server however we have a HP ProLiant DL380 G6 server, will a rack mount kit for a HP ProLiant DL380 G4 fit a HP ProLiant DL380 G6 server? ...
1
vote
1answer
214 views

Raid 1+0 on HP ML350 G5

I'm trying to setup a Proliant ML350 that has a SmartArray E200i Raid controller. I want to setup RAID 1 but there isn't any option for it, just 0, 1+0, and 5. I only want to use 2 drives since I just ...
3
votes
2answers
2k views

Install Oracle Linux 6.4 on HP ProLiant DL380e Gen8 server

installation does not detect the raid 1 logical drive created from ACU. the installation shows the two 2T disks, and after the installation is complete, I can not boot up to the system. I have been ...
1
vote
2answers
3k views

Cannot install Windows 2012 R2 on HP Blades

I have several HP ProLiant BL460c G1 blade servers where I am trying to install Windows 2012 R2. I was able to get it installed on one but can't get it installed on the rest. They all fail with the ...
5
votes
1answer
1k views

Proliant ML310e Gen8 Smart Array Predicted Failure Issue with SSD

This is a question related to this one: Third-party SSD solutions in ProLiant Gen8 servers but not covered by the question or the answers. I have an OCZ 120 gig SSD as system drive on a Proliant ...
1
vote
2answers
676 views

Check if an iLO board installed on a Windows machine

How can I check if a iLO-Board is installed on a Windowsmachine? I would like to do it via a script (python prefered). I thought about checking the connectionport. E.g.: If the iLO is connected via ...
3
votes
1answer
66 views

LFF in HP DL360p, how and is it a good idea?

I need a new server with 10 Tb storage and was looking at a DL360p with a D2600. It would do the trick, but it´s quite expensive and I´m looking for alernatives. 4 x 4 Tb would be enough, both for ...
1
vote
2answers
828 views

Windows Server 2012 gives error on installation

I have a HP proliant gen8 server on which i want to install windows server 2012. This is supposed to be a file server hence it has 8x1Tb physical drives in it. The problem is after creating a ...
1
vote
2answers
225 views

What “PAL Shim AllocRequest returning NULL” meens?

On a HP DL380e Gen8 with Dynamics Smart Array and SAS RAID installed I try to install Centos, after load the RAID Driver from HP Support Site I can access the RAID and do the installation. The ...
3
votes
1answer
450 views

Format SAS drives HP DL360G6

hoping you can point me in the right direction here. I scored an older HP DL 360G6 and have been having issues installing ESXi. After a bit of searching around a few people suggested completely ...
3
votes
4answers
613 views

Suitability of DL380p-Gen8 + D2700 for SQL 2012 Standard Edition

A question for those who know about HP server performance and SQL... I am trying to spec a suitable server that has the following requirements: Run SQL 2012 Standard Edition (I cannot get approval ...
2
votes
2answers
535 views

Detect HP ML370 G5 Bad disk in RAID0

I have one HP ML370 G5 server. Which has four 146GB SAS disks and two 300GB SAS disks that are configured as RAID 0. I have encountered a problem with one of my disks. The windows server event viewer ...
2
votes
1answer
3k views

HP ProLiant DL380 G7 servers will not POST

We have just received 2 HP DL380 G7's from our DR site. They have been running fine at the site for some time but we have tried to power them up in our DC and they will not post. We get a very brief ...
10
votes
2answers
3k views

SSD (Intel 530) read/write speed very slow with RAID 10

Explanation: We have a Server: Model: HP ProLiant DL160 G6 4 x 240GB SSD (RAID-10) 72GB DDR3 RAM 2 x L5639 HP P410 RAID Controller (256MB, V6.40, Rom version: 8.40.41.00) SSD drives are 4 brand ...
1
vote
2answers
4k views

Is there a better workaround or solution to boot a Proliant DL380 Gen8 from USB DVD drive than “Restore Default System Settings”?

An HP Proliant DL380e Gen8 BIOS P73 (03/01/2013) using iLO4 suffers from USB CD/DVD drive boot issues after a reboot, as described in HP Advisory c02707749. External USB DVD drive details are: ...
2
votes
0answers
452 views

How to increase CPU core speed of a guest to maximum of Citrix Xenserver Host

There is a Citrix XenServer 5.5 (HP ML370 G5, Xeon 2GHz) on this Server there is a Windows Guest (Windows 2008 R2 x64) under Properties I set 4 CPU Cores with max prio. But if I check with CPU-Z the ...
12
votes
3answers
2k views

Force renegotiation of PCI Express link speed? x2 card reverts to x1 width

In an effort to circumvent compatibility and cost barriers to using SSD drives with newer HP ProLiant Gen8 servers, I'm working to validate PCIe-based SSDs on the platform. I've been experimenting ...
1
vote
1answer
817 views

Add two disks to existing mirrored logical drive using hpacucli

I have an ESX-server with an existing disk array which consists of 6 disks that are mirrored: Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 1 ...
0
votes
1answer
216 views

Which controller for external SAS tape drive

We're about to buy an external LTO-4 tape drive for our HP DL380g6 server, and since SCSI is on the way out, we'll buy a SAS drive, probably the HP StoreEver LTO-4 Ultrium 1760 SAS External Tape Drive ...
1
vote
0answers
298 views

HP ProLiant DL120 G7 boot stuck due to disabled raid controller

After I have enabled RAID I disabled the B110i raid controller in the BIOS. Now it is stuck on a POST message and I can't do anything. Pressing F9 to re-enter the BIOS settings does nothing. It ...
3
votes
1answer
815 views

ESXi 5.5 on HP ProLiant DL380 G7 Server

I want to install ESXi 5.5 on a HP ProLiant DL380 G7 Server but it doesn't see any disks. Any idea why? I don't see any option in the BIOS regarding storage. I have 8 SATA drives and want to use them ...