Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

1
vote
1answer
152 views

HP DL380G5 with APC SC1500 UPS — transfer time failure

I have 2 of these things: APC SmartUPS SC1500 (220v). My Proliant G5 DL380 PSUs seem to really hate them. This is what happens when UPS switches to battery (PSU2 is plugged into the SC1500): iLo IML ...
1
vote
1answer
67 views

“Discovery failed” message trying to install hp ProLiant Support Pack 8.30 on DL380 G4

I'm getting the exact screenshots shown here, and followed the directions there despite the model difference. The BIOS had a different serial number for some reason, but it was an alphanumeric string ...
8
votes
1answer
2k views

Is there a way to view an HP ProLiant server IML log from within ESXi?

I'm investigating a system outage on an HP ProLiant DL360 G7 server running VMware ESXi 5.1. While I'm a huge advocate of installing the HP-specific management agents for ESXi or using the ...
2
votes
4answers
7k views

HP ProLiant ML310e Gen8 early system initialization hangs on 90%

just unboxed a brand new HP ProLiant ML310e Gen8 Server. I can reach the iLO webinterface but the Server hangs on the early system initialization on 90 % with the status code 0114. I did not find any ...
-2
votes
1answer
333 views

HP DL360p Gen8 for low latency trading - what to upgrade? [closed]

I'm using HP DL360p Gen8 for low latency trading (but not ultra-low-latency!). It means that i'm working in frame about "10+ microseconds" and i don't care about "1-5 microsecond" or nanoseconds. I ...
2
votes
1answer
979 views

How do I disable “Processor Power and Utilization Monitoring” on an HP ProLiant server?

I'm tuning my server for low-latency The guide suggests to disable this option "Processor Power and Utilization Monitoring" because: Disables iLO Processor State Mode Switching and Insight Power ...
2
votes
2answers
966 views

vSphere ESXi - Use both HP ProLiant DL360 G7 and DL360p Gen8 in the same cluster

I have vSphere cluster with few HP DL360 G7 servers, with Intel X5675 processor. I want to buy new server, HP 360 Gen8 with E5-2600 processors. Can I have this 2 kinds of servers in the same ...
-5
votes
1answer
56 views

How to configure a server for self hosting? [closed]

I have a machine, the guy I got it from gave me this specifications : HP Server/Workstation Proliant DL360 G5 DualCore Intel Xeon 5130 4096 Byte 292,00 GByte The building I want to set it up to, ...
0
votes
1answer
207 views

Refresh a specific page in ilo 4

I use iLo 4 for my HP dl380 gen 8. I access iLo webpage using internet explorer 10. (Although I would gladly use another browser if anyone can recommend a better one for iLo access). How can I ...
3
votes
1answer
1k views

BL460c G7 blade OS install

I have an HP c7000 enclosure with a BL460c G7 blade. I need to install Windows server OS on it. I have a problem with iLO, so it will not mount the ISO in the remote console. Tried using both Active-X ...
0
votes
1answer
253 views

HP DL380 G3 and Ubuntu

I have bought a HP Proliant DL380 G3 and am attempting to install Ubuntu Server 12.04 LTS. My server's got two Ultra320 SCSI HDDs but in the Ubuntu installation process, the OS fails to recognize ...
1
vote
1answer
826 views

HP SmartArray P212 disabled, cache module not attached

I have a DL180 G6 server with Smart Array P212 RAID controller. The server runs under Ubuntu. After an upgrade from Ubuntu 10.04 to 12.04 utility hpacucli (ver. 8.50-6.0) stopped working. The error ...
-1
votes
2answers
210 views

Hyper-V Server 2012 Hardware [closed]

I have an HP ProLiant ML350 G6 that I want to use with Hyper-V Server 2012 to host up to 9 VM's. The server has this specs: 1 x Intel Xeon E5606 2.13GHz LGA1366 (the motherboard supports 2 CPU's, ...
0
votes
3answers
733 views

Graphing temperature over time for HP iLo 4

Server: HP DL380p Gen 8, running latest iLo 4. One sensor, Sensor #25 for the HD Controller, tends to run a bit hot when compared to the other sensors. It tends to read 75 C. Caution temp is 100 C. ...
1
vote
1answer
474 views

HP Proliant DL360 G3: What version of XenServer is supported?

I've spent some time looking, and haven't been able to find a decent HCL for the current and past versions of XenServer. I have 3 HP Proliant DL360 G3's that I want to use for virtualization. They ...
1
vote
4answers
1k views

esxi 5.0 free + ilo3 + hp DL380 G7 = no ability to hardware monitor without HP SIM or vmware non-free?

ok so as stated in the subject line i have an HP DL380 G7 running esxi 5.0 free and an ILO3. Is there any way for me to get some decent monitoring of the hardware without paying any extra money for a ...
3
votes
3answers
1k views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) ...
0
votes
1answer
372 views

hpacucli is unstable - Sometimes finds controller, sometimes not

I try to monitor the RAID-status on my HP ProLiant DL380 G5 with hpacucli 9.20. But, it's acting rather weird. Most of the time, it will return: root@SERVER:~# hpacucli ctrl all show Error: No ...
-1
votes
1answer
37 views

Proliant server ML 370 G4 RAM upgraade

can we use ECC non-registered RAM 667MHz on HP Proliant ML 370 G4?
2
votes
2answers
2k views

Oracle Enterprise Linux installation can't see local disks on HP ProLiant DL360e Gen8

I am installing Oracle Enterprise Linux 5 on HP ProLiant DL360e Gen8. There are 2 300GB disks and they are configured in RAID 1 from ACU. During the installation installator can not see local hard ...
1
vote
1answer
1k views

HP DL360 G7 P410i controller troubleshooting

Server is HP DL360 G7 with P410i disk controller. 2xE5620 CPU's. 16GB RAM. Linux mysql 2.6.32-5-amd64 #1 SMP Mon Feb 25 00:26:11 UTC 2013 x86_64 GNU/Linux (Debian 6.0.7) hpacucli "ctrl all show ...
0
votes
1answer
116 views

Gparted not detecting controller after removing a drive

Ran into a weird scenario. Installed 5 hotswap HDD drives on a HP SmartArray P410 RAID controller running RAID-5. Went into Gparted and created different partitions. Realized one of the drives was ...
3
votes
3answers
145 views

Will adding HD's to a Proliant 350e server invalidate the warranty

We are looking at getting a new file server in the office. When looking at HD's the ones that HP sell are twice or more than just buying a drive and getting a caddy to hold it in the server. When we ...
0
votes
1answer
386 views

HP ML350 G5 Smart Array E200i battery voltage not low

I have a similar problem like this: HP ML350 G5 Smart Array E200i battery error Gets error message that says it is low voltage power on battery. Has measured voltages of the battery and it is exactly ...
1
vote
3answers
1k views

HDD with HP Proliant ML310e

I recently purchased a HP Proliant ML310e off PCNation.com as it seemed like a great deal. Come to find out, when I go to open up the case and install HDDs, the system is equiped with a ...
0
votes
0answers
472 views

HP Proliant ML150 G5 - Hyper V Server - 2012 - Hardware Monitoring

I've inherited a HP Proliant ML150 Gen5, I've installed Microsoft's free Hyper-V Server 2012, with minimal issue. I'm running VM's without issue, however I'm wondering what I can do for hardware ...
1
vote
1answer
203 views

HP Proliant ML350 G6 UPS

We're trying to select the best UPS within our budget. Our goal is to allow 2 x HP Proliant ML350 G6 servers time enough to shutdown. We're estimating this to be no more than 10 minutes. Can anyone ...
1
vote
2answers
426 views

Proliant Server E200i Raid Controller does not see array

Help! My server was configured with 3 arrays: array 1 and 2 were each 136Gb raid 5 using the first 5 drives. 3 x 72Gb and 2 x 300Gb. Array 3 was 3 x 500Gb using drives 6 7 8 for 1Tb. I had a ...
1
vote
1answer
968 views

ProLiant ML110 G7 Access Bios with USB Control Disable

I have a server ProLiant ML110 G7, and need to access the bios on it. The problem is the USB ports are disabled. How can I access it?
0
votes
2answers
553 views

ESXi PCI passthrough SmartArray P812 with 12TB MSA60

I have an HP Proliant DL 360 G6. ESXi is installed on the array controlled by the on board RAID controller (P420 I think) ESXi recognizes the P812 RAID controller but when I put PCI passthrough on it ...
0
votes
1answer
1k views

Checking Hard Disk Health on HP P410 RAID Card

How can I regularly check health of HDDs on a HP DL180 with P410 RAID Card on a live system? hpacucli is installed, however, could not see any options for this feature. Using CentOS, 64-bit. Thanks ...
1
vote
1answer
276 views

HP 420i RAID raid level transform

I have HP DL360p Gen8 8 with internal 420i controler and FBWC + battery. ACU says that raid level is 1+0. But in details of the controler i've found: Mirror Group 0: physicaldrive 1I:1:1 ...
6
votes
2answers
8k views

Fail to install Fedora 18 from flash drive (Warning: /dev/root does not exist) [closed]

I'm trying to install Fedora 18 on an HP DL 180 G6 with no luck so far. Please don't suggest installing/using Centos as we have a requirement to use Fedora 18. I have tried using two different USB ...
2
votes
1answer
2k views

HP ProLiant ML350 G6 powerup issue

My setup: HP ProLiant ML350 G6 (2x PSU/redundant) I present my issue in a few steps: Power cables disconnected (no power coming to server) Re-connect cables Press "Power button" -> I can see green ...
2
votes
2answers
821 views

HP smart array p400 RAID 1+0; two disks crashed

I am running a RAID 1+0 on a HP ProLiant DL360 G5 with 6 disks (each 146 GB). The mirror groups looks as follows: Group 1 146 GB 1-Port SAS Drive at Port 1l: Box1:Bay1 146 GB 1-Port SAS Drive at ...
-1
votes
1answer
464 views

HP DL360 Gen8 server support for DDIO?

I've bought pretty expensive HP server "HP ProLiant DL360p Gen8 E5-2640 1P 16GB-R P420i SFF 460W PS Base Server (646902-421)" ...
1
vote
3answers
287 views

HP DL180 P410i Adding Additional Drive

I have a DL180 G6 HP P410i with 2x SATA in RAID1 running Linux CentOS. Can I add (using the hot swappable drives) two more hard drives into the server and mount them without rebooting the server?
1
vote
3answers
892 views

No video on ILO3 (DL580 G7) after booting debian live

I'm having a problem with booting a Debian Live CD via iLO3 on a HP DL580 G7: In the moment the boot process finishes, the video on the iLO Java Console goes away and it just says 'No Video'. ...
3
votes
1answer
1k views

DL380 G4 dead after erasing NVRAM

Got a used HP ProLiant DL380 G4 server. It was at least able to start from an Ubuntu live CD a few days ago. When I connected the iLO-port to a router with DHCP server iLO 1.62 was accessibly using ...
1
vote
1answer
479 views

HP Proliant ML350 G6 Smart Error Test

I have a ML350 G6 with two array controllers : P410 and P410i. I have updated all possibile firmware on this server. I have 5 x Seagate Savvio 10K SAS drives. I am testing the drives with HP Insight ...
2
votes
2answers
2k views

Oracle Linux 6 kernel panic boot - anything I can do?

I'm running Oracle Linux 6 on a HP Proliant server. It's been running fine for the last week, but seemed slow earlier so the Oracle service was stopped. Rather than restart the service, I was asked to ...
3
votes
1answer
2k views

Updating ILO on HP DL380 G7 fails due to firmware version gap

I tried updating several HP Proliant DL380 G7 ILOs today to firmware version 1.50. Some had 1.15, some had 1.26. Those with the older revision refused to accept the firmware blob, the newer ones did ...
1
vote
1answer
2k views

Query ESXi memory slots/installed memory modules from PowerCLI 4.1

I have a VMware infrastructure with some ESXi 4.1 hosts and a vCenter Server 5.0 installed. I need to extend our hardware inventory with the following info: how many memory slots are available in ...
3
votes
2answers
233 views

Mass configure ILO?

Is it possible to mass change ILO settings with HP Systems Insight Manager? I am looking for an automated method of getting all my organizations servers power settings configured the same Ilo. ...
0
votes
7answers
364 views

Need to physically move a MSA60 over one row in the rack - do I need to power it down? [duplicate]

Possible Duplicate: How to correctly move a server inside a rack up and down Just wondering what people's thoughts are on moving a MSA60 over one rack. I have plenty of free cable slack, ...
0
votes
1answer
168 views

when I take out one hard disk from a RAID array, do I have to inserte a new one later?

I am using a Proliant server DL380 G4 (kinda old) and I was testing my RAID... just to know if it really works (using the native RAID that comes with the server), so, I took out one hard disk and work ...
1
vote
1answer
707 views

Is NUMA Enabled? [duplicate]

Possible Duplicate: HP DL360p with Intel E5-2630 NUMA Capable? i have an brand new HP DL380p Gen 8 with Windows server 2008R2 Enterprise Edition and i want to check if numa is enabled and ...
0
votes
1answer
427 views

HP ProLiant DL360 G4p compatibility with external SAS enclosure

I have a ProLiant DL360 G4p and a StorageWorks MSA60. The SmartArray controller currently in the DL360 is a SmartArray 6400. I would like to upgrade it to a controller with external mini SAS so I ...
-1
votes
1answer
159 views

Building recovery plan for HP DL380 G7 server [duplicate]

Possible Duplicate: Disaster recovery plan development best practicies or resources? I need your help to find out best practice to maintain my server and be ready for any kind of disk error ...
1
vote
2answers
273 views

why I cant see the 6 hard disk while install Debian on my server?

I am installing Debian 6 on a server, a HP Proliant DL380 G4. It comes with 6 hard disks. Originally it had Windows server and I could see only see 3 hard disks (the other three said the Admin, were ...