Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

2
votes
2answers
76 views

HP ProLiant Server HDDs - Buy Spare Parts vs. Retail

sometimes i have to upgrade HP Servers. For example when they get a new "job" to do. So lets say i need some more HDDs for an DL360 G7 Server. If the Server has an active HP Care Pack, does it matter ...
0
votes
0answers
60 views

HP DL380 Gen9 Disk Array issues

Looking for someone with a little HP DL380 Gen9 knowledge. In past variations of HP Servers, I was able to take disks from say a DL380 Gen6 server and move them to a Gen7 server and the server would ...
3
votes
3answers
1k views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) ...
1
vote
2answers
37 views

HP intelligent provisioning failed to start

Upgrading HP Intelligent provisioning(IP), the system turned off. After that I couldn't start IP using F10, I've tried to re-install/upgrade it via CD-ROM (according to HP trouble shooting website), ...
0
votes
1answer
41 views

Unable to connect to iLO2 Remote-Console be it either IE ActiveX or JVM

I have HP Proliant G5 series with license for iLO2. The server is running CentOS. Telnet ports are opened and I can successfully connect via certain port, that i've set up in iLO2 setting to use for ...
12
votes
3answers
3k views

Balancing RAM when using multiple CPUs

We have HP DL360 G7 server with one cpu and 16G 12G ram. We plan to add another cpu. So, we need also ram for second cpu. Is there any negative performance impact if we add different size of ram to ...
4
votes
1answer
53 views

Resetting factory defaults - HP Proliant DL360 gen8

I have an HP Proliant DL360 gen8 server that seems to have USB turned off in the BIOS. I would like to enable it again. With the USB turned off, I cannot intervene during POST - the USB keyboard does ...
8
votes
5answers
453 views

How can I determine the power demand of an HP server's power supply under load?

I bought an HP DL360 G7 1 U rackmount server. I am looking to put it in a colocation facility. The issue is almost every facility I have seen either limits the amount of power I can access or charge ...
0
votes
2answers
51 views

Server raid doesn't boot in the morning

We have a HP Proliant ML350 G6 with integrated sas raid controller. Since 3 days the server starts up in the morning without this raid. All othe HDDs / SDDs are ok. We did install the ServicePack ...
2
votes
1answer
2k views

XFS slow performance on LVM'ed RAID, faster when RAW or non-LVM

I have a weird issue with a server I am setting up. It's for a filesharing-type website, so fast IO and plenty of capacity are the requirements. OS is CentOS 6.4 64-bit The server in question is a HP ...
0
votes
0answers
32 views

Unable to install Win server 2008 R2 on ESXi VM - Proliant Gen 8 G1610T - 'Windows cannot install files' [closed]

I'm playing with virtualisation for the first time on a new Proliant G1610T. I'm running 4 x 3TB drives, which I set up as a single 6GB RAID10 logical drive though the iLO. I've installed the HP ...
0
votes
1answer
825 views

Kernel panic after boot Centos 6.5 HP DL320 B120i HPVSA

Im working with a new HPDL320 micro server (gen8-2) with a HP Dynamic array B120i My problem is after the setup. I provided the DiskDrive to the installer and everything is fine. at first i used kick ...
0
votes
1answer
81 views

Third-party SSD solutions in ProLiant Gen9 servers

has anyone experience with using consumer SSDs like the Samsung 850 Pro in an HP ProLiant Gen9 server with a Smart Array P440ar controller? Judging by various reports about older versions (Gen6 to ...
-2
votes
1answer
53 views

Installing CentOS7 / RHEL 7 on Proliant DL360e Gen8 [closed]

I found a fix for this after hours of digging on line. Here is the main article i am using for a reference: https://access.redhat.com/articles/118133 The RAID card which comes with this system ...
5
votes
1answer
514 views

Recovering data from a failed SAS drive? (RAID0…yes, I know)

We have a HP DL360 server with a P400 controller, which has two 72GB 10K SAS drives in a RAID 0 configuration (yes, I know...RAID 0). The HP Model number for the drives is DG072A8B54 Recently, one ...
1
vote
1answer
45 views

Why does performance monitor show more cores than I have in my DL580 server?

I ran a performance monitor trace on two hp DL580 G7 servers running Windows Server 2008 R2 with 40 CPU cores. One perfmon trace showed the server having 60 cores, and the other trace showed 64 ...
0
votes
4answers
235 views

Ubuntu installation can't detect hard drives

I'm installing Ubuntu onto a HP Proliant DL360 G7 server, which has a hardware Smart Array RAID controller that is not compatible with Ubuntu. HP say the RAID controller needs to be disabled in the ...
3
votes
2answers
209 views

HP ProLiant MicroServer Gen 8 - Hard Drive Configuration?

I have a HP ProLiant MicroServer Gen 8 box. I installed a 4tb drive and created a simple array. The raid controller saw the entire drive. I then used IP 6.1 to install Windows Server 2012 Standard. IP ...
1
vote
1answer
49 views

RAID 1 failed disk replacement - backup recommendations [closed]

Having recently lost one drive in a RAID1 (mirrored) setup with a "hot spare" on a HP ProLiant ML350 G6 server, we're about to have it replaced with a new one. The disks are hot swappable so for that ...
0
votes
1answer
12 views

ML350 G5 Intel Xeon 5130 Server Dual Core and memory module of 4GB

I want to buy ML350 G5 Intel Xeon 5130 Server Dual Core 2GHz which have 2GB ECC RAM. I am .net developer and I want to setup server as my dev. server in my house. On official page there is Maximum ...
2
votes
2answers
53 views

HP ProLiant ML350 G6 RAID 1 disk compatibility

We are running an HP ProLiant ML350 with a RAID 1 set up on two identical 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise HDDs and a third acting as a "hot spare" - HP part # HPQ-507127-S21. ...
1
vote
1answer
52 views

4 processors fail in ProLiant DL580 after swap

I recently shipped my HP ProLiant DL580 G5, and am now in the process of trying to get it set up again. However, upon getting the power supplies and HDDs reinstalled, I was unable to power the thing ...
7
votes
5answers
915 views

ML350 G5 - upgrade hot swap drives to 6 Gb/s?

I support a non profit. They got an ML350 G5 donated to them and I immediately put it to good use for them :) It came with four HP 300GB 15K SAS drives - and of course, they have all now failed. I ...
0
votes
1answer
44 views

DL380 G7 w/ SmartArray P410i - Disk “Bad Target Count”

I have a DL380 G7 with 8 x 600GB 10K RPM SAS disks in it. I'm just running some diagnostics on it before putting it in production. Thus far, no errors had popped up until I ran the HP SmartStart CD ...
1
vote
2answers
121 views

Problems with DL380 Gen9 Smart Array

I recently bought a ProLiant DL380 Gen9, i've had some trouble getting it up and running...I ran the ProLiant SPP ISO to uprade firmwares but felt the system became less stable as a result, at one ...
1
vote
2answers
134 views

iLO 3 Firmware Update (HP Proliant DL380 G7)

The iLO web interface allows me to upload a .bin file (Obtain the firmware image (.bin) file from the Online ROM Flash Component for HP Integrated Lights-Out.) The iLO web interface redirects me to ...
0
votes
0answers
33 views

ProLiant DL320 G5p Server 2003 No longer boots

I have the above server that runs a simple transcoder. We wanted to upgrade the drive to 1TB from the 300s that are installed now. I first wanted to clone the drive with clonezilla from the 300 to ...
0
votes
2answers
40 views

What is the difference between HP iLO Free version and Advanced Version?

I have the HP iLO Advanced 3 year warranty that is expiring in 7 months. I wanted to know is it worth staying with the advanced pacakge, or can I do the same exact thing with the free version of iLO. ...
-3
votes
1answer
213 views

Data recovery from deleted raid array

Hello I deleted a raid 1 array on a hp b110i and I wanted to know if it is possible to recover the data. Also if Windows server was on the array that was deleted can it be recovered. Thanks
0
votes
4answers
179 views

How is NUMBER_OF_PROCESSORS env variable generated?

I have a couple of HP BL460Cs that are being tested to determine which processor we want to go with when we start upgrading our equipment, and there's a problem with this environment variable on one ...
3
votes
2answers
7k views

HP ProLiant ML350 G6: Does the RAID rebuild automatically?

One of sas hd of this ML350 died... We're buying a new one and I wanted to ask if I can just take out the faulty one and insert the new one with the server on to let it rebuild the raid or I'm forced ...
1
vote
2answers
182 views

What could be the reason of an HP Proliant ML110 G6 server to restart automatically?

We have a HP Proliant ML110 G6 server running (Windows 2012 Server R2) which is giving problem since last few days. The problem is that it restarts automatically and randomly. By restart I mean to ...
-1
votes
0answers
7 views

HP Microserver Gen8 (Intel Celeron G1610T) with Ubuntu Server 14.04? [migrated]

I'm looking for a small home server working with Ubuntu Server 14.04. I want to install SAMBA and a UPNP streaming server on it. I found this small HP Proliant Microserver with an Intel Celeron G1610T ...
2
votes
2answers
165 views

New RAID hdparm slow

I just got a HP DL180 G6 that has 25X 146GB 15K SAS drives, 36GB RAM, 2X 2.0GHz Xeon 1333Mhz FSB. For fun I configured them all in a single RAID 0 and installed Ubuntu on it to see how fast it could ...
2
votes
1answer
52 views

esxi passthrough storage adapter

I run ESXi 5.1.0 (HP version) on HP ProLiant ML310e G8 v2. There are 2 Storage Adapters: Smart Array P222 Dynamic Smart Array B120i Storage Adapters are visible in ESXi/Storage Adapters. Storage ...
3
votes
1answer
287 views

VMWare ESXi error upon boot “Relocating modules and starting up the kernel”

Coming back from a 4-day weekend, I noticed the A/C had been turned off for the duration of the long weekend and the heat was around 80-82 degrees. The HP ProLiant DL185G5 was running but the system ...
1
vote
2answers
144 views

Windows Tool to read S.M.A.R.T. attributes on SATA drive in HP D2700 Enclosure using P812 Controller

I've got two HP DL380 G7 servers + P812 controller + D2700 enclosure. They're database servers with 144 Gb RAM. P812 firmware is 6.40, D2700 is at 0147 They both worked great with 18 OWC Mercury ...
2
votes
1answer
172 views

HP SATA Hot Plug Activity Light & B120i Array Controller

The activity rings on both of my hot plug drives rotates continuous (they are in RAID 1 configuration). The drive status on both is solid green. Is this normal? The iotop command is showing no ...
12
votes
3answers
2k views

Force renegotiation of PCI Express link speed? x2 card reverts to x1 width

In an effort to circumvent compatibility and cost barriers to using SSD drives with newer HP ProLiant Gen8 servers, I'm working to validate PCIe-based SSDs on the platform. I've been experimenting ...
0
votes
1answer
471 views

Install RAID driver on HP DL380 G9

I'm trying to install RHEL 6.2 on HP DL380 G9, but the I cannot find the storage during the installation. I thought maybe RHEL 6.2 does not support HP P440AR contoller by default, then I go to HP ...
0
votes
1answer
1k views

HP ProLiant ML350e Gen8 v2 Not Detecting Hard Drives

I have tested several solutions but non of them cant detect my 2 hard drives (legacy mode , acpi and raid embended) I have a 2 Dell-Seagate SAS Cheetah 15k,7 hard drives (ST3300657SS) (they are not ...
0
votes
1answer
598 views

Kernel Panic - Not Syncing: Fatal exception

Server (HP Proliant D320e G8 v2) froze at this screen during boot today (running CentOS 6.5): I was able to get the server to boot after a 'press and hold'. I've been having many problems with the ...
2
votes
1answer
81 views

Windows Server 2012R2 can't be pinged while copying big file (HP DL 380 G8)

I have an HP DL380 G8 Server with installed Windows Server 2012 R2 and newest Network drivers etc. Another Person copied big files from an network share to the local hard disk. While copying the ...
0
votes
4answers
128 views

HP service pack for Proliant with ESXi 5.0

Server: ProLiant DL380 G5 currently system ROM: P56 10/25/2010 I would like to upgrade the system service pack with HP Service Pack for Proliant 2014.06.0_784915-001 ...
3
votes
1answer
67 views

HP Proliant G6 reporting failed SSD drive - alternative strategies for monitoring?

I would like to get your feedback about a controversial situation I found myself in some days ago. I was tasked to use a HP Proliant G6 for development purposes with 2 new (< 2 months, never used ...
29
votes
1answer
1k views

Is it possible to influence the way CPUs are enumerated under Linux?

I have a HP DL380 G7 with 2 mismatched CPUs in it. One is a quad core CPU with faster cores, and one is a 6 core CPU with slower cores. On this box I run an application that due to licensing reasons ...
2
votes
3answers
254 views

How can I fix Purple Screen of Death for ESX 5.5?

I have a ESX 5.5 installed on my HP Proliant DL 180 G6 with a configuration of 8X Intel(R) Xeon(R) CPU E5540 @ 2.53GHz, 24 Gb RAM. Recently the server has crashed four times, showing the Purple ...
6
votes
1answer
236 views

Reusing a drive from an array

I read the question here Reusing Raid 5 Drive? but I'm not sure it applies 100% to my situation. What is the standard practice when removing a drive from an array to use as a spare for another array? ...
1
vote
1answer
130 views

Plextor SSDs don't work reliably in HP DL380p Gen8 servers

We recently purchased a few HP 380p G8 servers to add some VM capacity, and decided to add a pool of SSDs to our standard build, to create a "fast" RAID 1+0 array for some of our VMs that have higher ...
1
vote
1answer
95 views

ProLiant DL380p not recognising HP hard drives on boot

I have two ProLiant DL380p rack mounted small factor servers. I have installed the following drives onto both servers: 1x 240GB SSD drive (Crucial NOT HP branded) 2.5" SATA 7.2k rpm 1TB ...