Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

3
votes
3answers
1k views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) ...
1
vote
2answers
255 views

Random 0x0000007B BSOD, Windows Server 2008 R2 on HP Server

The server at my company has been acting strange for as long as I know. Since it is a production server, we rarely do a complete shutdown/restart, but when we do, at random times we got a BSOD for ...
1
vote
2answers
418 views

HP DL360 G5 will not boot with all DIMM slots full

If I install memory into every DIMM slot the server will not boot, no display will be shown via VGA. ILO 2 detects these slots' memory as being "Not installed". If I remove the memory from the two ...
1
vote
2answers
518 views

Proliant Server E200i Raid Controller does not see array

Help! My server was configured with 3 arrays: array 1 and 2 were each 136Gb raid 5 using the first 5 drives. 3 x 72Gb and 2 x 300Gb. Array 3 was 3 x 500Gb using drives 6 7 8 for 1Tb. I had a ...
1
vote
2answers
531 views

HP Proliant ASR not functioning properly

I have a problem with my HP Proliant D320 G6 server, OS Debian Lenny. From time to time, there is a kernel panic (which is not the issue here, I'm trying to find the anwer to it elsewhere, because I ...
0
votes
2answers
141 views

How to replace SCSI with SATA or adapt SCSI to SATA drives

At first, I apologize for my question, but I am complete beginner. My friend gave me an old HP Proliant DL385 server which was replaced in bank, where he works, by newer stuff. Because of privacy, ...
0
votes
2answers
651 views

HP Proliant DL320 G5 Memory Registered or Unregistered?

I have an old HP Proliant DL320 G5 with 2x 1GB of RAM. I would like to swap out the old ram and install 4x 2GB of RAM to bring it to the max capacity. The manual calls for PC2-5300 unbuffered modules. ...
-2
votes
2answers
739 views

Red Hat 5.3 on HP Proliant DL380 G5 and failed drive on RAID controller

I have a development ERP server here in my office that I assist with support on, and originally the DBA requested a single drive setup for some of the drives on the server. Thus the hardware RAID ...
2
votes
1answer
97 views

Rackmounting a tower chassis HP BLc3000 Blade System

Ok, so we have a HP BLc3000 that we are bringing in from a remote office to our central datacentre, its currently in its purchased tower / pedestal configuration (with the wheels and all that) Is it ...
2
votes
1answer
617 views

HP DL 180 G6 installation problem

I have a problem installing Windows 2003 Standart in a DL180 G6 using the Easy Set-Up CD provided by HP, Windows installation process return: "The following value in the .SIF file used by setup is ...
1
vote
1answer
141 views

What could be the reason of an HP Proliant ML110 G6 server to restart automatically?

We have a HP Proliant ML110 G6 server running (Windows 2012 Server R2) which is giving problem since last few days. The problem is that it restarts automatically and randomly. By restart I mean to ...
1
vote
1answer
167 views

Setting up multiple HDD's in HP ProLiant MicroServer G7

I have a HP ProLiant MicroServer G7 N54L which came with one 250Gb hdd which I installed Ubuntu on. It also has a 2Tb external USB hdd connected - all this, is working perfectly fine. When I loaded ...
1
vote
1answer
73 views

Wrong keyboard layout with HP RAC and KVM Viewer

I am currently working with a ProLiant N54L Microserver and a HP Remote Access Card. I access the server through my Mabook with a German keyboard layout. On installing Ubuntu, the installation cant ...
1
vote
1answer
108 views

HP SL250s will not boot from the network, does not appear to DHCP

I have an HP Proliant SL250s Gen8 (right-hand) server which is apparently not able to boot from the network. If I configure the system to PXE boot in the BIOS, or if I hit F12, it does start up the ...
1
vote
1answer
353 views

DL185 G5 Upgrade to 3tb hard drives

I would like to upgrade my DL185 G5 to take 3tb hard drives. the P400 controller does not support 3Tb hard drives. If I upgrade the controller to a P212 (which I already have), Do I simply use a ...
1
vote
1answer
156 views

ML350 Using both p800 and e200i

I have an ML350 G5 with a P800 and the integrated e200i. I'm using the P800 to service the main drive cage with 6 SAS drives in RAID 5. However, I would love to also convert some of the unused 5.25" ...
1
vote
1answer
473 views

Performance of external USB disk with ESXi5

I have a new HP DL120 G7 server with ESXi5. One VM is a Win2003 instalation and I have an external USB2.0 drive attached by USB Controller and USB Device. I copy a 4GB file from external USB to ...
0
votes
1answer
126 views

HP DL380 G7 Losing Drive Array

I have an HP Proliant DG380 G7 dropping one of it's arrays every hour, on the hour, for 2-5 minutes. The OS is SBS 2011 Standard, the servers runs Exchange, DC, files & Trend WFBS 8. I can watch ...
0
votes
1answer
749 views

Kernel panic after boot Centos 6.5 HP DL320 B120i HPVSA

Im working with a new HPDL320 micro server (gen8-2) with a HP Dynamic array B120i My problem is after the setup. I provided the DiskDrive to the installer and everything is fine. at first i used kick ...
0
votes
1answer
107 views

How to set two RAID1 on the HP SA-E200i controller?

I have an HP ML350 G5 with a RAID 1 between two SAS disks. I want to add 2 extra disks and configure a new RAID 1 separated from the other one. Reading this topic Multiple RAID arrays on E200i it ...
0
votes
1answer
32 views

How do you get into the interface on a ProLiant DL 366 G7 and set RAID? (Smart Array 410 P)

How do you get into the interface on a ProLiant DL 366 G7 and set RAID? Into the Smart Array P410 controller?
0
votes
1answer
466 views

HP ESXi WBEM Agent Not Showing Power Supply Data

Server: HP ProLiant DL 380 G5 ESXi: 5.0.0 U1 (HP Custom Image) HP SIM: 7.1 (CentOS 6.3 VM) I have my basic hardware monitoring up and running. I cannot see events for power supply failure within HP ...
0
votes
1answer
331 views

MSA30 Linux CLI Configuration?

Can some one help me shed some light on this please? I have a MSA30 hooked up to a HP Proliant DL380 G4 running SuSE SLES Linux. My question is how do I configure the hard drives connected to be in a ...
0
votes
1answer
390 views

CentOS 5.5 APIC issue on ESX 4.1 & ML115

I've just installed vSphere 4.1 on an HP ProLiant ML115 G5 Quad-core and am trying to install CentOS 5.5 as a guest system. However, when the guest boots up I get a calibrate_APIC_clock warning and a ...
-1
votes
1answer
58 views

migrate from raid 5+1 (spare) to raid 50 without losing data on hp p420i smart array

i have a raid 5+1(spare) with 8 disk of 1TB each one. my controller is hp p420i. i want add to my server another new array 5+1(spare) with other new 8 disk to build one array in raid 50 whithout lose ...
-3
votes
1answer
86 views

hp dl140 g3 how to repair after failed bios update

During updating bios to the new version (1.18) i got an error that computer can't read rom file. Then after reboot server did not start. Actually it starts but does not show anything, screen is blank, ...
2
votes
0answers
254 views

ssh to ILO on a DL380 gives key_verify failed for server_host_key

When I try to do connect to the ILO 4 of a DL380 I get the following error: ssh -vvv ilo@me2_ilo OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data ...
2
votes
0answers
298 views

HP SNMP Traps signalled every 10 seconds for a NIC

I'm trying to setup SNMP traps on my HP DL160 G6 (Xenserver) to notify me whenever I have issues with the server. Following suggestions from this serverfault post, I've installed the HP SNMP agents ...
2
votes
0answers
429 views

How to increase CPU core speed of a guest to maximum of Citrix Xenserver Host

There is a Citrix XenServer 5.5 (HP ML370 G5, Xeon 2GHz) on this Server there is a Windows Guest (Windows 2008 R2 x64) under Properties I set 4 CPU Cores with max prio. But if I check with CPU-Z the ...
1
vote
0answers
37 views

HP Proliant ML350 G5 - smart array initializing

I have a big problem with a HP ProLiant ML350 G5 with 2 SAS HDD 146Gb : it start with the message : "Slot 0 HP Smart Array E200i ... initializing" without any error message. if I test the HDD with ...
1
vote
0answers
209 views

Missing NICs in a HP ProLiant DL380 G6 running RHEL 5.5 64-bit

I have 2 twin boxes HP ProLiant DL3680 G6 running RHEL 5.5 64-bit. In one of them, two network interfaces (eth2 and eth7) are missing, i.e., they are not available: # ifconfig eth2 eth2: error ...
1
vote
0answers
782 views

HP Dl360e Gen8 Not Detecting Hard Drives

I have a new HP Proliant DL360e G8 and it is not detecting the hard drives. We are using both non-hp, and official hp hard drives from an older server (DL120). Hard drives are 3.5" and they are not ...
1
vote
0answers
283 views

HP ProLiant DL120 G7 boot stuck due to disabled raid controller

After I have enabled RAID I disabled the B110i raid controller in the BIOS. Now it is stuck on a POST message and I can't do anything. Pressing F9 to re-enter the BIOS settings does nothing. It ...
1
vote
0answers
40 views

HP SUM for mezzanine cards

I'm using SUM 5.3.5, and in the HTML report I see Mezz#1, Mezz#2, Mezz#3 in the header. Further down in the "BLADE SERVERS (Quick Glance)" section I see values for the type of mezzanine card, when ...
1
vote
0answers
254 views

Proliant dl 180 g6 install normal SATA drives

I have a Proliant DL180 G6 with problems in the P410 controller. I want to instal normal SATA drives in the server. I see the mother has 4 SATA slots but I can´t find how to power the SATA drives ...
1
vote
0answers
62 views

Getting iLO logs for a specific period

I am fetching iLO event logs remotely using cpqlocfg.exe and script Get_iLO_Log.xml. But this gives complete event logs and there is no parameter that can be set to get the logs only for a specific ...
1
vote
0answers
586 views

Using conrep - Capturing and duplicating the BIOS settings

I got an HP ProLiant DL160SE G6, I need to capture the entire BIOS settings of one server and duplicate them to same model servers. This will save us lots of time and eliminate human errors. I ...
0
votes
0answers
55 views

100% disk usage Windows server 2008

We have HP Proliant G6 server with 4 1.5Tb SATA disks. 2 RAID 1 arrays and 2 logical drives 1.5Tb. One day ago I mentioned twith resmon that disk usage is 100% and i\o speed is not more then 4Mb\s ...
0
votes
0answers
252 views

I am seeing error during boot sequence on HP ProLiant ML350p Gen8

The error states: Caution: Memory conflict detected. You may face boot problem. What steps would you recommend I take to troubleshoot this? Details: Dual Xeon E5 v1, two LSI 9286-8e ...
0
votes
0answers
233 views

hp-health install doesn't work on Debian 7 (Wheezy)

I try to install hp-health on my HP ProLiant ML350 G4 server with a Debian 7 (Wheezy) installation. I downloaded the package on : ...
0
votes
0answers
112 views

HP DL160G6 bios update fails

I tried to update the BIOS from my HP DL160G6's. Unfortunately the Windows update degraded my BIOS version from 243 to 237. But when I try to upgrade both servers to version the update fails. First I ...
0
votes
0answers
179 views

Configuring HP Proliant iLO using hponcfg

I am configuring an iLO using hponcfg by logging into the machine remotely and running hponcfg with scripts Mod_Directory.xml and then with Mod_Network.xml. I am enabling the DHCP on the device. But ...
0
votes
0answers
563 views

HP Proliant ML150 G5 - Hyper V Server - 2012 - Hardware Monitoring

I've inherited a HP Proliant ML150 Gen5, I've installed Microsoft's free Hyper-V Server 2012, with minimal issue. I'm running VM's without issue, however I'm wondering what I can do for hardware ...
-1
votes
0answers
56 views

proliant g7 boot usb

So my problem is, that my Proliant N54l G7 doesn't boot from a USB HDD. I previously had my Arch Linux OS installed on a 32gb USB key and it would boot fine. But predictably, the cheap USB key lasted ...