Hewlett Packard's range of Intel and AMD-based free-standing, rackmount and blade servers.

learn more… | top users | synonyms

3
votes
3answers
1k views

Extend RAID 1 (HP SmartArray P410i) running Linux

I took over a fairly simple server setup with the following RAID 1 config running Ubuntu 11.10 (Kernel 3.0.0-12-server x86_64): => ctrl all show config Smart Array P410i in Slot 0 (Embedded) ...
1
vote
2answers
97 views

Random 0x0000007B BSOD, Windows Server 2008 R2 on HP Server

The server at my company has been acting strange for as long as I know. Since it is a production server, we rarely do a complete shutdown/restart, but when we do, at random times we got a BSOD for ...
1
vote
2answers
297 views

HP DL360 G5 will not boot with all DIMM slots full

If I install memory into every DIMM slot the server will not boot, no display will be shown via VGA. ILO 2 detects these slots' memory as being "Not installed". If I remove the memory from the two ...
1
vote
2answers
420 views

Proliant Server E200i Raid Controller does not see array

Help! My server was configured with 3 arrays: array 1 and 2 were each 136Gb raid 5 using the first 5 drives. 3 x 72Gb and 2 x 300Gb. Array 3 was 3 x 500Gb using drives 6 7 8 for 1Tb. I had a ...
1
vote
2answers
481 views

HP Proliant ASR not functioning properly

I have a problem with my HP Proliant D320 G6 server, OS Debian Lenny. From time to time, there is a kernel panic (which is not the issue here, I'm trying to find the anwer to it elsewhere, because I ...
0
votes
2answers
45 views

How to replace SCSI with SATA or adapt SCSI to SATA drives

At first, I apologize for my question, but I am complete beginner. My friend gave me an old HP Proliant DL385 server which was replaced in bank, where he works, by newer stuff. Because of privacy, ...
0
votes
2answers
425 views

HP Proliant DL320 G5 Memory Registered or Unregistered?

I have an old HP Proliant DL320 G5 with 2x 1GB of RAM. I would like to swap out the old ram and install 4x 2GB of RAM to bring it to the max capacity. The manual calls for PC2-5300 unbuffered modules. ...
-2
votes
2answers
705 views

Red Hat 5.3 on HP Proliant DL380 G5 and failed drive on RAID controller

I have a development ERP server here in my office that I assist with support on, and originally the DBA requested a single drive setup for some of the drives on the server. Thus the hardware RAID ...
2
votes
1answer
802 views

CentOS 6.5 not booting after installation on Hp ML310e Gen8

I have experience with Installation and configuration of Windows Server system. I am trying to install CentOS 6.5 on the above mentioned HP box and the installation process goes on without a hitch. ...
2
votes
1answer
336 views

Slow throughput speeds with fusionio iodrive2

I recently purchased two HP 380P Gen 8 servers with 365GB IODrive2s for VDI using Vmware View 5.2. After using the latest HP vmware 5.1 update 1 ESX installer and then installing the Fusion-io ...
2
votes
1answer
77 views

Rackmounting a tower chassis HP BLc3000 Blade System

Ok, so we have a HP BLc3000 that we are bringing in from a remote office to our central datacentre, its currently in its purchased tower / pedestal configuration (with the wheels and all that) Is it ...
2
votes
1answer
535 views

HP DL 180 G6 installation problem

I have a problem installing Windows 2003 Standart in a DL180 G6 using the Easy Set-Up CD provided by HP, Windows installation process return: "The following value in the .SIF file used by setup is ...
1
vote
1answer
47 views

HP ProLiant DL380 G6 with 2 x Intel x5650 CPUs

I have an old HP DL380 G6 server, I am trying to upgrade the processor. I added 2x X5650. but each time I powered the server on, the fans stat working loudly and keep like that. the server never never ...
1
vote
1answer
39 views

CentOS 7 Install Error: Call to StartServiceByName Timeout

I'm trying to install CentOS 7 on my HP Proliant DL320e Gen8 v2 server. I'm attempting this through the iLO4 IRC and virtual media. I'm booting 'CentOS-7.0-1406-x86_64-Minimal'. I get to the first ...
1
vote
1answer
27 views

Wrong keyboard layout with HP RAC and KVM Viewer

I am currently working with a ProLiant N54L Microserver and a HP Remote Access Card. I access the server through my Mabook with a German keyboard layout. On installing Ubuntu, the installation cant ...
1
vote
1answer
79 views

HP SL250s will not boot from the network, does not appear to DHCP

I have an HP Proliant SL250s Gen8 (right-hand) server which is apparently not able to boot from the network. If I configure the system to PXE boot in the BIOS, or if I hit F12, it does start up the ...
1
vote
1answer
318 views

DL185 G5 Upgrade to 3tb hard drives

I would like to upgrade my DL185 G5 to take 3tb hard drives. the P400 controller does not support 3Tb hard drives. If I upgrade the controller to a P212 (which I already have), Do I simply use a ...
1
vote
1answer
148 views

ML350 Using both p800 and e200i

I have an ML350 G5 with a P800 and the integrated e200i. I'm using the P800 to service the main drive cage with 6 SAS drives in RAID 5. However, I would love to also convert some of the unused 5.25" ...
1
vote
1answer
416 views

Performance of external USB disk with ESXi5

I have a new HP DL120 G7 server with ESXi5. One VM is a Win2003 instalation and I have an external USB2.0 drive attached by USB Controller and USB Device. I copy a 4GB file from external USB to ...
0
votes
1answer
31 views

HP DL380 G7 Losing Drive Array

I have an HP Proliant DG380 G7 dropping one of it's arrays every hour, on the hour, for 2-5 minutes. The OS is SBS 2011 Standard, the servers runs Exchange, DC, files & Trend WFBS 8. I can watch ...
0
votes
1answer
279 views

Kernel panic after boot Centos 6.5 HP DL320 B120i HPVSA

Im working with a new HPDL320 micro server (gen8-2) with a HP Dynamic array B120i My problem is after the setup. I provided the DiskDrive to the installer and everything is fine. at first i used kick ...
0
votes
1answer
83 views

How to set two RAID1 on the HP SA-E200i controller?

I have an HP ML350 G5 with a RAID 1 between two SAS disks. I want to add 2 extra disks and configure a new RAID 1 separated from the other one. Reading this topic Multiple RAID arrays on E200i it ...
0
votes
1answer
29 views

How do you get into the interface on a ProLiant DL 366 G7 and set RAID? (Smart Array 410 P)

How do you get into the interface on a ProLiant DL 366 G7 and set RAID? Into the Smart Array P410 controller?
0
votes
1answer
421 views

HP ESXi WBEM Agent Not Showing Power Supply Data

Server: HP ProLiant DL 380 G5 ESXi: 5.0.0 U1 (HP Custom Image) HP SIM: 7.1 (CentOS 6.3 VM) I have my basic hardware monitoring up and running. I cannot see events for power supply failure within HP ...
0
votes
1answer
305 views

MSA30 Linux CLI Configuration?

Can some one help me shed some light on this please? I have a MSA30 hooked up to a HP Proliant DL380 G4 running SuSE SLES Linux. My question is how do I configure the hard drives connected to be in a ...
0
votes
1answer
386 views

CentOS 5.5 APIC issue on ESX 4.1 & ML115

I've just installed vSphere 4.1 on an HP ProLiant ML115 G5 Quad-core and am trying to install CentOS 5.5 as a guest system. However, when the guest boots up I get a calibrate_APIC_clock warning and a ...
-3
votes
1answer
30 views

hp dl140 g3 how to repair after failed bios update

During updating bios to the new version (1.18) i got an error that computer can't read rom file. Then after reboot server did not start. Actually it starts but does not show anything, screen is blank, ...
2
votes
0answers
93 views

ssh to ILO on a DL380 gives key_verify failed for server_host_key

When I try to do connect to the ILO 4 of a DL380 I get the following error: ssh -vvv ilo@me2_ilo OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data ...
2
votes
0answers
189 views

HP SNMP Traps signalled every 10 seconds for a NIC

I'm trying to setup SNMP traps on my HP DL160 G6 (Xenserver) to notify me whenever I have issues with the server. Following suggestions from this serverfault post, I've installed the HP SNMP agents ...
2
votes
0answers
334 views

How to increase CPU core speed of a guest to maximum of Citrix Xenserver Host

There is a Citrix XenServer 5.5 (HP ML370 G5, Xeon 2GHz) on this Server there is a Windows Guest (Windows 2008 R2 x64) under Properties I set 4 CPU Cores with max prio. But if I check with CPU-Z the ...
1
vote
0answers
68 views

Missing NICs in a HP ProLiant DL380 G6 running RHEL 5.5 64-bit

I have 2 twin boxes HP ProLiant DL3680 G6 running RHEL 5.5 64-bit. In one of them, two network interfaces (eth2 and eth7) are missing, i.e., they are not available: # ifconfig eth2 eth2: error ...
1
vote
0answers
417 views

HP Dl360e Gen8 Not Detecting Hard Drives

I have a new HP Proliant DL360e G8 and it is not detecting the hard drives. We are using both non-hp, and official hp hard drives from an older server (DL120). Hard drives are 3.5" and they are not ...
1
vote
0answers
227 views

HP ProLiant DL120 G7 boot stuck due to disabled raid controller

After I have enabled RAID I disabled the B110i raid controller in the BIOS. Now it is stuck on a POST message and I can't do anything. Pressing F9 to re-enter the BIOS settings does nothing. It ...
1
vote
0answers
39 views

HP SUM for mezzanine cards

I'm using SUM 5.3.5, and in the HTML report I see Mezz#1, Mezz#2, Mezz#3 in the header. Further down in the "BLADE SERVERS (Quick Glance)" section I see values for the type of mezzanine card, when ...
1
vote
0answers
187 views

Proliant dl 180 g6 install normal SATA drives

I have a Proliant DL180 G6 with problems in the P410 controller. I want to instal normal SATA drives in the server. I see the mother has 4 SATA slots but I can´t find how to power the SATA drives ...
1
vote
0answers
53 views

Getting iLO logs for a specific period

I am fetching iLO event logs remotely using cpqlocfg.exe and script Get_iLO_Log.xml. But this gives complete event logs and there is no parameter that can be set to get the logs only for a specific ...
1
vote
0answers
529 views

Using conrep - Capturing and duplicating the BIOS settings

I got an HP ProLiant DL160SE G6, I need to capture the entire BIOS settings of one server and duplicate them to same model servers. This will save us lots of time and eliminate human errors. I ...
0
votes
0answers
31 views

100% disk usage Windows server 2008

We have HP Proliant G6 server with 4 1.5Tb SATA disks. 2 RAID 1 arrays and 2 logical drives 1.5Tb. One day ago I mentioned twith resmon that disk usage is 100% and i\o speed is not more then 4Mb\s ...
0
votes
0answers
175 views

I am seeing error during boot sequence on HP ProLiant ML350p Gen8

The error states: Caution: Memory conflict detected. You may face boot problem. What steps would you recommend I take to troubleshoot this? Details: Dual Xeon E5 v1, two LSI 9286-8e ...
0
votes
0answers
177 views

hp-health install doesn't work on Debian 7 (Wheezy)

I try to install hp-health on my HP ProLiant ML350 G4 server with a Debian 7 (Wheezy) installation. I downloaded the package on : ...
0
votes
0answers
80 views

HP DL160G6 bios update fails

I tried to update the BIOS from my HP DL160G6's. Unfortunately the Windows update degraded my BIOS version from 243 to 237. But when I try to upgrade both servers to version the update fails. First I ...
0
votes
0answers
136 views

Configuring HP Proliant iLO using hponcfg

I am configuring an iLO using hponcfg by logging into the machine remotely and running hponcfg with scripts Mod_Directory.xml and then with Mod_Network.xml. I am enabling the DHCP on the device. But ...
0
votes
0answers
465 views

HP Proliant ML150 G5 - Hyper V Server - 2012 - Hardware Monitoring

I've inherited a HP Proliant ML150 Gen5, I've installed Microsoft's free Hyper-V Server 2012, with minimal issue. I'm running VM's without issue, however I'm wondering what I can do for hardware ...
-1
votes
0answers
29 views

How to turn off power metering in HP ILO2?

I have an issue with all of my RHEL 5.3 servers, where HP iLo2 power meter checks the power draw of the power supply on the server. However this gets passed to the /var/log/messages in our host, and ...