We have an XTM 515 Firewall in our company and are in Lync 2013 implementation phase. For the Edge Server we need 3 different IP addresses. Our ISP provided 8 addresses in 2 different subnets. For ...
I have a VPS with these public IP-addresses: xx.xx.xx.192 (This IP-address is assigned to eth0) xx.xx.xx.193 xx.xx.xx.194 xx.xx.xx.195 xx.xx.xx.196 xx.xx.xx.197 xx.xx.xx.198 xx.xx.xx.200 xx.xx.xx.201 ...
We have a Draytek Vigor 2820 in our office and we have a few servers running websites and email applications. These servers each have their own public ip using WAN aliases that are mapped to their ...
I have an RV220W but this issue may apply to other Cisco routers. My website is deployed at public IP address 126.96.36.199/MyWebsite/Default.htm. My web server has an internal IP to which port ...
I have a very large storage pool located on a server behind a NAT. Given that ipv6 is not possible in my case, what options do I have left to reach this pool? If I rent a VPS with a public ip, could ...
It's all pretty much in the title. Is it possible to assign both local and public IPs to different nodes connected to the same switch? I have 4 servers with 2 gigabit ethernet ports each. I want ...