PuTTY is a free open source SSH/Telnet terminal emulation program for Windows and Unix like operating systems.

learn more… | top users | synonyms

0
votes
0answers
19 views

Putty wrong passphrase

I connect to a remote server via SSH and I used a private and public key pair to do so, I usually do this on my laptop but today I wanted to set it up on my desktop. So I copied over the Private key, ...
-1
votes
0answers
26 views

Windows: How can I run a service in the same security context as a non service process (or vice versa)?

My problem is very similar to Turn off "isolation mode" in Vista Task Scheduler? but unfortunately the "accepted" answer isn't of much use. I need to invoke pscp from a service to transfer a ...
0
votes
1answer
55 views

Putty: SSH “Server refused our key”

I am trying to access CentOS using Putty. Server used is vps. And i am getting an error called "Server refused our key" "No supported authentication methods available". Previously it was connecting, ...
-1
votes
1answer
28 views

why cannot I type password in putty? [closed]

When I open a session in putty to connect to the server, the console asks: login as: so I type root or another username then the console ask username@ip.ip.ip.ip's password: From here I can't type ...
1
vote
3answers
200 views

Change ssh port for specific ip address

I get the trouble with putty, so I prefer using shell( linux) to access server via ssh, my ip address has alter port for ssh is 6091, so is there anyway to access server via ssh by command ssh ...
0
votes
1answer
131 views

Laravel Forge SSH on windows not recognized

I decided to try out the Laravel Forge, but I'm having trouble with the SSH keys. I use digitalocean.com for the VMs and have used SSH keys with success many times before. However when I paste my ...
-1
votes
1answer
144 views

problems with putty while establishing ssh connection (Ubuntu Server)

since two days I am facing a really weird problem. I have receantly installed ubuntu server 14.04 LTS on a workstation. It has a fix IP address, which I can successfully ping from other computers in ...
1
vote
2answers
141 views

Setting up a tunnel with putty, jump server for using synergy

Long time ago I set up an environment where my Linux machine (LM) was a synergy server and my Windows machine (WM) the synergy client as described here. Since our admin put in a Linux jump server ...
1
vote
2answers
59 views

CentOS ssh connection stalls after server bandwidth upgrade

I have a few linux servers inside a customer that recently MASSIVELY increased his bandwidth - from about 0.8/5mbps to 25mpbs/100mbps... (yes 100mpbs!) this is very good, but ever since my ...
-1
votes
1answer
38 views

SSH to WebServer using PuTTY [closed]

I am using 1Dollar-WebHosting.com to host my website. I need to SSH to my WebServer using PuTTY. When in cPanel, under the Security tab: 1) I click on SSH/Shell Access. 2) I then click on "Manage ...
-1
votes
1answer
194 views

SSH “Server refused our key” for all users except root user [closed]

I followed this tutorial and key authentication worked great for root. but when I created user xxx and added different key in authorized_keys and tried to login using putty where error was shown " ...
-2
votes
3answers
57 views

Softlink or hardlink a Linux remote folder in Windows [closed]

The thing is that, our codebase is located on a remote server, that, we access it through a vpn with putty. The server is in CentOs. I was wondering if its possible to softlink or hardlink this folder ...
0
votes
2answers
168 views

How to enable KeepAlive in putty command line

currently i am using putty like this from the command line: putty.exe -ssh user@192.11.11.11 -pw mypassword how do i enable KeepAlive so that the connection doesnt die if i leave the terminal ...
1
vote
1answer
49 views

putty terminal cursor buggy on debian-wheezy

since my vagrant box changed from squeeze to wheezy my cursor on the terminal is kind of buggy. for example when i try to type this command: vagrant@portal-vagrant:/$ ls -l it ends like this: ls ...
0
votes
0answers
86 views

Connection Refused when connecting ssh with putty on aws instance

We created an ebs volume out of a snapshot of an running instance's root volume and then attached this new volume to instance A. When ssh connecting in putty, there is error saying Connection Refused. ...
1
vote
2answers
133 views

Changed SSH default port and disabled root login. Client didn't save the new port can't login/connect to it now

Working on my centos server. Connecting via putty. Changed SSH default port and disabled root login. But the client didn't save the new port and defaulted back to 22 (my new one was 42650 or something ...
1
vote
1answer
56 views

Putty Terminal Locks randomly

I have an issue where my Putty Session will become unresponsive after a period of time. If I am tailing something, or waiting on a process that does not return data while executing, the terminal will ...
2
votes
1answer
250 views

launch a batch remote command via /putty ssh and get the output in a local file

I have been trying to launch a remote command in putty using the -m [file] flag and get the output putty.exe -[user]@server -m commandscript (the command is just cat> somewhere ) and after that I ...
1
vote
2answers
134 views

How to get SSH PuTTY bookmarks / sessions synchronized?

As sysadmin working in IT consulting, I have a lot of SSH PuTTY (managed by SuperPutty) sessions, and also, I have 2 computers, and a few virtual machines and a Terminal Server with Putty in which I ...
2
votes
2answers
470 views

Filezilla/Puttygen doesn't recognize private key file

I have generated a key for an Ubuntu Virtual Machine running on Azure Cloud Services http://www.windowsazure.com/en-us/manage/linux/how-to-guides/ssh-into-linux/ openssl req -x509 -nodes -days 365 ...
-2
votes
1answer
70 views

How to show the actual username instead of nobody in Linux?

I'm trying to find the memory usage for each account on my VPS. I use the "top" command to achieve that but the problem is that it is not showing the actual username for each account. I have four ...
0
votes
0answers
598 views

PuTTY “Server unexpectedly closed network connection” error before login - CentOS 6.3 VPS

I can't seem to login to my CentOS 6.3 Server VPS, neither PuTTY nor the SerFISH Web SSH service seem to work. It started after I tried to login using X11 forwarding in PuTTY. Now even with every ...
0
votes
0answers
114 views

PuTTY connecting IIS proxy get proxy error

I'm trying to use PuTTY v0.63 to connect a proxy server. In the Proxy setting, Proxy type = HTTP Proxy hostname and port are correct If I don't put in the username and password, I get an error ...
1
vote
2answers
190 views

How to configure ssh tunneling with Putty between two RHEL servers?

I'm trying to allow ssh access from a remote RHEL server to a local RHEL box via Win/Putty gateway. Basically, I'd like to be able to do 'ssh localhost -p 512' on a remote server so that it would ...
0
votes
0answers
79 views

Why isn't my SSH tunnel working?

The SVN server at my work has been moved to a different machine. This wouldn't present a problem except that the firewall rules have not been set up properly and I'm unable to connect to the new ...
0
votes
2answers
93 views

How to regain an interactive shell that was disconnected via SSH?

Scenario: I am on windows, using putty to login to a root shell. It is currently running an interactive process which prompts for input to continue. Typical interactive process, its probably waiting ...
8
votes
1answer
181 views

How do I specify port number for PuTTY to use with Windows cmd?

I start most of my SSH connections with a windows command like this cmd://"C:\Program Files\PuTTY\putty.exe" -ssh root@xxx.xx.xxx.xx I assume this defaults to port 22. Now I need to connect on a ...
0
votes
1answer
186 views

Enable Cisco ASA as an SSH Tunneling

I am trying to utilize my Cisco ASA as a SSH Tunnel. I've configured this before when using a Linux server as the SSH target, however I cannot seem to get it to work with the ASA. I have configured ...
1
vote
1answer
148 views

ESXi 5 VM Putty session hangs, vSphere client timing out

First of all I believe this is a ESXi issue but let me know if you have seen this. It started about a year ago when I noticed occasionally when I putty via SSH to my VM guests, if I do anything that ...
-1
votes
2answers
112 views

Remote desktop over ssh

I am following the below link to setup remote desktop over ssh using putty. "http://m.desy.de/sites2009/site_m/content/e262/e96318/RDPusage.pdf" But, i am not able to connect to my remote server ...
0
votes
0answers
39 views

Use PuTTy for local SOCKS Server binding?

I want to create a SOCKS server on my gateway server. PuTTY has it's -D switch which allows dynamic SOCKS proxy through the given SSH connection. Is it possible to do locally, without a SSH ...
0
votes
1answer
42 views

Logging remote commands sent during SSH session, so the log would be unencrypted

I connect to server A (running OpenSSH server in Linux OS) using Putty: localhost% putty.exe A How to cause the SSH server to log the commands sent from localhost in unencrypted manner. Thanks
2
votes
1answer
256 views

Putty: Incoming Packet was garbled on decryption

I am unable to connect to my server on my local network (VM). I have multiple servers I am able to connect to. When I try to putty into the server, I get the message Incoming Packet was garbled on ...
1
vote
1answer
701 views

What command should be used to connect via SSH through squid proxy?

I have set up a Squid HTTP Proxy (in centOS) and intended to use it also for ssh connections. Managed to configure putty (in a windows client) to use this proxy while connecting by ssh. Confirmed in ...
-4
votes
2answers
90 views

How to restart a Linux server [closed]

I logged into a Linux machine with its IP address, using putty, and entered shutdown command in home directory instead of in tomcat bin. The session got closed and I am unable to re-login into the ...
1
vote
1answer
58 views

PuTTY/PSFTP & Pageant. Select particular key

I have a windows box that we use for outgoing SFTP transfers. They're all scripted and I use PSFTP with PAGEANT to hold the private keys. My problem is that over the last 12 months a new partner of ...
1
vote
0answers
243 views

putty openssh rsa key signature invalid

I'm running a server with Debian Linux 3.2.46-1+deb7u1 with OpenSSH Server 6.0 and secured the login with a 2048 bit RSA key. Although connecting with OpenSSH Client from another machine succeeds, ...
0
votes
2answers
387 views

Filezilla or PuTTY: I have “Access granted” followed by “Server unexpectedly closed network connection”. How to troubleshoot?

Here is an extract of Filezilla debug traces : Offered public key from "(...)" Offer of public key accepted, trying to authenticate using it. Access granted Server unexpectedly closed network ...
-2
votes
1answer
36 views

How to use pscp and putty same time, with one password? [closed]

I have same password with pscp as putty (obviously) to an Ubuntu 13.04 server, and Im running a batch file, win 8.1 preview. This batch file requires me to run 2 windows, and enter 2 passwords ...
0
votes
1answer
75 views

PSCP Command Errror

Can anybody explain what i am doing wrong here. I am trying to copy an entire directory up to a remote server. "c:\Program Files (x86)\PuTTY\pscp.exe" -l mleyland -pw Password5 -p ...
-1
votes
1answer
69 views

How to configure Ctrl+Alt+F1 to F6 to use with putty instances in Windows? [closed]

Is it possible to set up putty (or a fork), have multiple terminals/logins open while fullscreen, but each one with a single dedicated shortcut for switching to it? Just like Ctrl+Alt+F1 to F6 ...
0
votes
0answers
57 views

Svn up from putty

I have a SVN server running fine I can update commit from various PCs no problems. I have one server where I run "svn up" to download my trunk into the production apache server. All is fine if I do it ...
1
vote
1answer
91 views

Cannot access HG repo any more after upgrading to Wheezy

I just updated my proxmox server based on wheezy 7.1. to the latest version (3.1). It acts as a central mercurial repository that is accessed via ssh as well. It seems like I am unable to use ssh-hg ...
0
votes
1answer
197 views

SSH-Connection through gateway nc not working

I have the following problem: I want to connect from a Windows 7 client to a remote Debian 7 Server via an SSH Gateway running on a SLES 11.3 Server. To test the connection I use plink with the ...
0
votes
1answer
183 views

Frequent interruptions of SSH connection to VPS

My SSH sessions die at what seem like random times - response will stop, and then a few seconds later PuTTY will pop up a message with, "Server unexpectedly closed network connection." It seems to ...
0
votes
1answer
103 views

How to run putty on a particular network adapter

I have a loopback adapter which uses SLIP to communicate to a microcontroller. The issue I have is on Windows I dont know how to run putty on that particular network adapter. Does anyone know how to ...
0
votes
1answer
32 views

How to read active ip connection command

Can you tell me what the 937 is? Forgive me I'm new to Linux and I don't know where to start looking. When I run: $ netstat -ntu | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n 1 ...
1
vote
1answer
757 views

SSH tunnel speed is very slow

I have remote server with Ubuntu Linux and I want to establish SSH tunnel with this server from Windows machine using PuTTY(plink). I have to use this method for getting access to some service on this ...
0
votes
1answer
61 views

teraterm stay open after disconnecting from host?

Is there any way to get teraterm's windows to stay open after disconnecting from a host, so that I can see the terminal output in the scrollback? Trying to transition from Putty, which is nice, but ...
2
votes
2answers
840 views

Changing the passphrase of a puttygen private key in Windows

I have a private key in Windows, created by puttygen.exe. I used default options to save it, the tool automatically gave it a .ppk extension, and it looks like this: PuTTY-User-Key-File-2: ssh-rsa ...