0
votes
1answer
11 views

mdadm array is active but is not listed

I am running Ubuntu Server 12.04. I did apt-get upgrade and received a warning from mdadm. update-initramfs: Generating /boot/initrd.img-3.11.0-24-generic W: mdadm: the array /dev/md3 with UUID ...
0
votes
1answer
52 views

Reconstructing the disk order in RAID 6 with 7 disks

a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of ...
0
votes
1answer
28 views

Raid1+0: create stripe over two /dev/mdx on partition or not?

Given that I haven't found a way to define how a Raid10 is created with mdadm, i went the Raid1+0 solution. How to display/define Mirror/Stripping pairs with mdadm mdadm --create /dev/md0 --level=1 ...
1
vote
1answer
54 views

How to display/define Mirror/Stripping pairs with mdadm

I want to make a standard linux software Raid10 over 4 HDD. The server has 4HDDs, 2 pairs from different vendors in order to avoid batch problems. I want to have the mirror over two different ...
1
vote
0answers
42 views

Upgrade Raid 1 to Raid 0+1 and bootloader issue

I am trying to convert my current RAID 1 to RAID0+1 and facing issue in installing bootloader - please have a look what i am doing. My current configuration is RAID1(2*10GB): [root@localhost ~]# ...
1
vote
1answer
700 views

mdadm Boot Error, incrementally starting raid array Ubuntu SErver 14.04

i build a small Server with Ubuntu 14.04 for Samba, I has one SSD Drive (the ubuntu installation is on it) and 2 3TB SATA Disk, the sata disk are combined to a Raid 1 with mdadm. Now sometimes (no ...
1
vote
0answers
105 views

Ubuntu 12.04 MD array not assembling after motherboard change [closed]

I recently upgraded my server by installing a new Xeon e3-1270v3 and Supermicro X10SAT board. Installation was simple and I reconnected my controller card, a LSI 9211-8i. When I booted the array would ...
0
votes
0answers
77 views

Software RAID: file system becomes read-only, mdadm fails with SEGFAULT

I have software RAID1 on Ubuntu 10.10 (Linux ubuntu 2.6.35-32-generic-pae). It is dedicated server I control via SSH. Yesterday datacenter people changed one HDD which was crushed. I did not run ...
0
votes
1answer
56 views

mdadm RAID 1 config deleted

one of our huge production servers crashed this morning due to a HDD failure on port 0 (the bootable one). That server was running CentOS 6.5 in RAID 1 with mdadm. Although, a trainee changed the HDD ...
4
votes
1answer
370 views

CentOS 6.5 mdadm Raid 1 - Kernel Panic during raid data check

I have a brand new CentOS 6.5 install with two (mounted to /mnt/data) 1tb Western Digital Black drives in raid 1 with mdadm, configured via the installer. Unfortunately every now and again the entire ...
0
votes
2answers
97 views

Is mdadm RAID Toast?

I took all my drives out and put them onto a new cpu/mobo. (upgrading) I boot up and mdadm claims it can't boot my degraded RAID. /dev/sdb sudo mdadm --examine /dev/sdb /dev/sdb: ...
2
votes
0answers
57 views

RAID1 disks “forked”, now duplicate

I have got a server hosted by OVH, which is configured to have a soft RAID1 array, /dev/md0, that holds a LVM PV. There is another /dev/md1 array, which was supposed to be the /boot, but which is ...
1
vote
0answers
607 views

How to recover an mdadm array on Synology NAS with drive in “E” state?

Synology has a customized version the md driver and mdadm toolsets that adds a 'DriveError' flag to the rdev->flags structure in the kernel. Net effect - if you are unfortunate enough to get a array ...
0
votes
0answers
89 views

mdadm array fails to start at boot, bad superblock on component drive

At boot my mdadm raid5 array fails to start, saying that one of my disks (sdi) has a bad superblock. However, once I log in, I can start the array no problem with mdadm --assemble /dev/md0 ...
1
vote
2answers
143 views

How do I fix my server to boot properly after removing / adding a drive on my mdadm software RAID

I configured a RAID-5 array for a data partition mounted on /mnt/data. My system is not booting on it (/ and /boot is on a dedicated drive not part of any RAID array). I added a 4th drive to my 3 ...
2
votes
0answers
117 views

mdadm raid10 or nfs performance issues?

I have a fresh mdadm RAID10 device which is healthy, built from 4 x 7200rpm SATA 3 drives: # cat /proc/mdstat Personalities : [raid10] [raid1] md2 : active raid10 sdc3[5] sda3[4] sdb3[1] sdd3[3] ...
2
votes
0answers
135 views

mdadm error: found two disks with the number 0

Im running a server deep in the forest , and after a hard disco failure i got this error. error: found two disks with the number 0. It a server with 2, 1 TB disc in raid 1 with mdadm 0.9 SDA failed ...
2
votes
1answer
32 views

MDADM RAID5 Size

I currently have 9x1TB disks in RAID5, which to me is 8TB worth of storage. However, I am not getting that at all. This was after moving from RAID6 to RAID5 and performing the necessary commands to ...
3
votes
1answer
87 views

RAID-5 array being split on reboot (ubuntu)

I've set up a RAID-5 array on Ubuntu 13.04 (kernel 3.8.0-27-generic) using mdadm - v3.2.5 - 18th May 2012. It appears to work fine and be in high spirits: $ cat /proc/mdstat Personalities : ...
0
votes
0answers
21 views

Harddrive check going-on?

I have a server that has suddenly become unusable (responds very slowly to requests). It seems to be related to some on-going RAID check. Here is what I get when I run cat /proc/mdstat : ...
1
vote
2answers
79 views

Check health of RAID array

I have a server with RAID 1. Currently when I type in the following command: cat /proc/mdstat I get: Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] [faulty] ...
1
vote
1answer
165 views

Is it safe to snapshot an mdadm RAID with only xfs_freeze?

Is mdadm guaranteed (and trusted via experience) to be safe for taking snapshots with only an xfs_freeze? I have encountered vague warnings about mdadm still working in the background, thus making ...
0
votes
1answer
28 views

mdadm grow operation giving nonstop libata errors

Running Debian 7, mdadm 3.2.5. I issued a command to grow a 5 disk, 3 spare raid 5 array to an 8 disk, 0 spare raid 6 array: mdadm --grow /dev/md0 --level=6 --raid-devices=8 ...
0
votes
1answer
199 views

How to delete removed devices from a mdadm RAID1?

I had to replace two hard drives in my RAID1. After adding the two new partitions the old ones are still showing up as removed while the new ones are only added as spare. I've had no luck removing the ...
3
votes
1answer
503 views

flashcache with mdadm and LVM

I am having trouble setting up flashcache on a system with LVM and mdadm, I suspect I am either just missing an obvious step or getting some mapping wrong and hoped someone could point me in the right ...
0
votes
2answers
116 views

Path of md device wrong after reboot

I have to set up a software raid (level1) on a Ubuntu server 12.04. It should serve files in the network via Samba. The server has the following disks: 250gb Sata hdd (Ubuntu is installed on that ...
2
votes
1answer
140 views

linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated ...
1
vote
1answer
101 views

Expanding raid 5 luks partition

I have just bought 2 new drives to my raid 5 array. I have successfully added them to the array and resynced. I now have a /dev/md4 drive that is 16 TB, but the crypt-luks partition md4p1 is still 12 ...
0
votes
2answers
442 views

Fedora, fsck fails at boot

I'm facing a problem in my server during the startup. This is my actual configuration: 320GB each. Raid1 -> /dev/md127. Working. /dev/sda /dev/sdc 1000GB each. Raid1 -> Use to be /dev/md126, ...
-1
votes
2answers
77 views

What is the correct way to create new raid5 in Linux?

I added some new disks, and tried to create new array, using: mdadm --create /dev/md/2 --level=5 -x 0 --raid-devices=4/dev/sd{a,b,c,g}2 It creates the array, but after reboot - it's gone. What ...
1
vote
2answers
155 views

M1015 pass-through and hot-swap in Linux with md raid (IBM x3620)

I'm setting up a small, but hopefully durable server for a student community, and the hardware is an IBM x3620 M3 with a builtin M1015 RAID card. To make the setup future proof and avoid vendor ...
0
votes
1answer
568 views

RAID Recovery on a QNAP TS-869U-RP

I've had my trusty QNAP NAS (T869-RU) fail on me over night with (apparently) two of the eight disks in the RAID5 MDADM array from /proc/mdstat: [/etc] # cat /proc/mdstat Personalities : [linear] ...
1
vote
1answer
289 views

How do I check if smartd and mdadm are running correctly?

I have a raid system on debian: Disk /dev/sda: 320.1 GB,... Device Boot Start End Blocks Id System /dev/sda1 * 1 2432 19535008+ fd Linux raid ...
4
votes
1answer
146 views

Rebuild mdadm RAID5 array with fewer disks

I have a 4 disk RAID5 array, one of which is starting to fail according to smartd. However, since I'm using less than half the space on /dev/md0, I'd like to rebuild the array without the failing ...
1
vote
1answer
628 views

Linux - dmraid (or mdadm) - Rebuild RAID 10

A while ago I had a raid10 config crap out on me, and am now just getting around to trying to salvage the array so I can rebuild and move on with my life. Basically a drive in each subset failed, ...
2
votes
2answers
78 views

erased md0, md1 and can't recreate them

I previously had a working RAID 1 array. I think as a result of running grub-install /dev/sdb and grub-install /dev/sdc I somehow wiped my computer of md0 and md1. I need to set them up again. When ...
0
votes
2answers
169 views

HDD in RAID failure?

I received some alerts from mdadm. Further checking seem to indicate that some HDD's may be damaged. Could you please verify that? There is two SCSI drives which should work in RAID1 This is an ...
2
votes
1answer
398 views

Recover mdadm RAID 10 array: listing all as spares

I'm a bad person and haven't backed up my RAID elsewhere. I now have a RAID10 array that won't assemble, and I'm hopeful I can save it. Here's the details: I have five hard drives set up as RAID10 ...
3
votes
1answer
547 views

Linux RAID mdadm: what does 'Events' mean?

When I type mdadm --detail /dev/md0 I get a lots of useful information most of which I understand. However I also get a line that reads: Events : 0.710 Where the number varies. Naively, I ...
2
votes
1answer
203 views

How to grow mdadm RAID5 into degraded state?

mdadm - v3.2.5 - 18th May 2012 Currently have: Version : 1.2 Creation Time : Tue Jun 25 19:03:31 2013 Raid Level : raid5 Array Size : 2930135040 (2794.39 GiB 3000.46 GB) Used ...
0
votes
2answers
131 views

Recovering a Raid1 array from a broken drive

I've been asked to look at a computer which had a Raid 1 Array in it until one drive failed 12 months ago without being picked up and has now been replaced but the other drive is also in a bad way and ...
1
vote
0answers
122 views

Resize a RAID 5 Partition

I'm moving my VG to a RAID, i have 3 disk 600GB, the VG is in the partition /dev/sdc2 /dev/sdc1 1G type linux <-- Boot partition /dev/sdc2 599G type Linux LVM One disk have the VG and with the ...
1
vote
1answer
651 views

How to get notified of mdadm RAID problems?

I am running Ubuntu 12.04 LTS. Yesterday I found a message in my mailbox saying that my server was shut down. I proceeded to reboot the system, but it didn't come up after many minutes, and I didn't ...
0
votes
0answers
85 views

why cant I set the correct partition size in fdisk

I am currently attempting to setup a raid array. At this point in time I am setting up partitions of the same size on each hard drive that I would like to use in the array, although when I used fdisk ...
3
votes
1answer
516 views

Resize openSUSE 12.3 GPT ext4 partitions in a RAID1 disk array

I have a software raid configured (/dev/md2) which has assigned the partitions sda3 and sdb3 from two 3TB disks (sda and sdb). The partition types are GPT not LVM and file system is ext4. Now, the ...
1
vote
0answers
446 views

mdadm: Growing a RAID0 Array Weirdness

I have created 3 RAID0 arrays using mdadm on 3 Rackspace CloudServers using Rackspace's CloudBlockStorage as their devices. Each array has their own set of CBS volumes. RS-CBS has an upper limit of ...
0
votes
1answer
308 views

mdadm Device or resource busy not by dmraid

I have an issue with a new mdadm raid. When i try to: root@dys:~# mdadm --add --verbose /dev/md0 /dev/sdb1 mdadm: Cannot open /dev/sdb1: Device or resource busy dmraid i pointed as the usual ...
1
vote
1answer
287 views

Remove “faulty state” in RAID 1

I wonder if there is any possibility to remove the state "faulty" in a RAID 1 if (for example) someone failed the wrong hard disk. I already searched for answers with Google and fout several ...
1
vote
0answers
77 views

Expanding raid5 software raid

I have recently bought 4 2TB drives to expand my existing 4*2TB raid5 setup, using mdadm software raid in debian. As a initial step, I have created a raid5 on the four new drives and created an ...
0
votes
1answer
340 views

mdadm - raid device name changed on reboot

I'm not sure why, but after I restarted my ec2 instance, /dev/md0 didn't start as it normally would. after I saw what's available in /dev/md*, instead of seeing /dev/md0, there is a device there named ...