0
votes
1answer
15 views

Converting Non-Raid to Raid

I have a server that currently has one 1TB drive in it. I just bought a 1TB drive to put in Raid-1 with it. The server already has data on it, so my question is what do I have to do to make it a raid ...
0
votes
1answer
49 views

How to copy RAID 1 HDDs from one server to another Identical server

I have one IBM X3100M4, type 2582 windows server and having 2 x 500 GB HDDs in RAID Copy. Now brought new server and having blank HDDs. How can I copy RAID HDDs from Old server to new server? I have ...
2
votes
0answers
64 views

Solaris 9: Degraded mirror unmanageable with raidctl after drive replacement

We have a pair of Sunfire v20z's (WITH LSI MPT raid) that have each had one drive in their mirrors die. bash-2.05# cat /etc/release Solaris 9 4/04 s9x_u6wos_08a x86 ...
0
votes
2answers
50 views

Transfer from RAID-1 to RAID-0 — easy as cloning?

I have a RAID-1 of 1TB drives using on-board RAID. I have 2 new 240GB SSDs I want to place in RAID-0. This is Windows Server 2012. I know with disk cloning/transferring that it is important going ...
-1
votes
2answers
226 views

What is the performance implication of hardware vs software RAID in 2-disk RAID0/RAID1 setup?

I am choosing between two similar models of servers, one of which has software RAID, while the other hardware one. Servers in question are SYS-E32-1 and SYS-E32-3 from So you Start (an OVH brand) and ...
6
votes
1answer
176 views

Is it possible to enable RAID 1 on an already in-use HP Proliant DL380 G5

I have a HP Proliant DL380 G5 with two HDDs in RAID 0 (Stripe)(72GB+72GB). It has been running Windows Server for quite a while now and has 30GB of occupied space on a stripted volume. I've now ...
1
vote
3answers
102 views

SQL Server 2012 RAID Setup and Performance [closed]

At my company we are in the process of setting up a new SQL Server 2012 box. We have 6 physical drives with 3,000 gigs each. We are considering two different RAID configurations and are wondering ...
1
vote
2answers
74 views

RAID 1 - IOPS Write Penalty 1 or 2

I keep seeing articles describing the RAID IOPS write penalty for RAID 1 (and RAID 10) as 2. RAID 0 would have a penalty of 1, of course, since every write is simply written to disk. RAID 1 is ...
0
votes
1answer
203 views

How to delete removed devices from a mdadm RAID1?

I had to replace two hard drives in my RAID1. After adding the two new partitions the old ones are still showing up as removed while the new ones are only added as spare. I've had no luck removing the ...
1
vote
2answers
413 views

How to move RAID 1 to RAID 1+0

I have two HP disks in RAID 1 (300 Gb), and would like to at 2 additional disks in RAID 1+0 having in total of 600 Gb on C:. I would like to know is it possible to do it using Array Configuration ...
-1
votes
1answer
56 views

Does RAID1 also checks for corruption? [closed]

I have two 1.5 TB disks, and I don't trust both of them because of weird noises and bad clusters. I was wondering if I put them in a software RAID1 array (mirrored volume in Win7) it will write my ...
0
votes
0answers
136 views

Half of disk space missing on RAID1, all disks it seems to be ok

Hi there. I have a problem with raid array. I miss it a half. My disks layout is 2 x 250 gigabytes velociraptors (Array_0000) 2 x 1TB velociraptors (Array_0001) ....both connected in RAID1. OS ...
0
votes
1answer
223 views

RAID1 - Possible to recover failed drives?

PowerEdge 1850 has two physical hard drives, configured as RAID1. Accessing via DRAC 4/I I can see that both drives indicate Failed & Offline. However, the DRAC log indicates that both drives ...
2
votes
1answer
136 views

Concerns of simultaneous failure of SSD Raid1

Since SSD's have a write limit requiring wear leveling one would assume that all things being equal 2 identical SSD drives would wear nearly identically if they mirror data writes. When one drive ...
1
vote
1answer
903 views

DELL Server RAID Exception - Resyncing

Today they brought this old DELL server with 2 HDD initialized in RAID 1 Array. The server was used as a syslog aggregator for a long time and I was tasked to to some maintenance before we return the ...
1
vote
1answer
75 views

Speed up RAID 1 drive read speeds

Sorry I don't know much about this stuff...we have been having issues with a slow server, very slow for users and when you access the server direct, we have added more RAM but it seems it may be a ...
3
votes
1answer
554 views

Linux RAID mdadm: what does 'Events' mean?

When I type mdadm --detail /dev/md0 I get a lots of useful information most of which I understand. However I also get a line that reads: Events : 0.710 Where the number varies. Naively, I ...
0
votes
0answers
79 views

Reconfigure from Raid0 to Raid1, is it possible?

currently I have Fujitsu tx140 s1p servers, one Tower and one Rack. They are both running with the same hardware, configures the same way, so I'll just ask one Q for both. They have an motherboard ...
0
votes
1answer
242 views

“LV Status NOT available” after converting root from lvm2 to lvm2+raid1 (lvconvert --type raid1)

I just converted by lvm2 root filesystem from linear lvm2 (single HDD:sda) to lvm2 raid1 (using lvconvert -m1 --type raid1 /dev/ubuntu/root /dev/sdb5 command). But after this conversion I can't boot ...
-1
votes
3answers
264 views

Raid 0, Raid 1, Raid 5, Raid6, Raid 10 Read/Write performance? [duplicate]

Assume a single disk has a baseline of 1W & 1R performance, how does the different RAID configurations behave? My initial guess: Raid 0: 2W 2R Raid 1: 1W 2R Raid 5: ? ? Raid 6: ? ? Raid 10: ...
3
votes
1answer
965 views

Converting BTRFS filesystem to RAID1 fails with “Inappropriate ioctl for device”

I had a ~1.6TB BTRFS volume on a single partition, to which successfully I added another freshly created and formatted partition (on another device) of exact same size with the intent of mirroring ...
0
votes
1answer
402 views

New HDD swap in SAS 6 ir shows it is missing?

SETUP: Dell Poweredge T410 with Windows Server 2003, SAS 6 IR Raid-1. Both the original drives were Dell Certified Seagate Barracudas for enterprise, 250gb. The new HDD is a Seagate Barracuda 500gb, ...
0
votes
2answers
251 views

Raid 1 and Latency

I am aware that RAID comes with certain write penalties, etc and that varies at different levels. I am trying to figure out how latency is affected in RAID 1. From my SAN, I can look at the number of ...
0
votes
1answer
707 views

SBS 2003 boot stalls at acpitabl.dat

I have a SBS 2003 server running for 3 year without any problems, and few days ago it freezes during the boot. System is using two 500 Gb drives in RAID1 (Intel Matrix 7.5) After trying to load in ...
0
votes
2answers
110 views

New harddisc in RAID fails after only a few days

Last weekend I had to replace one harddisc in a RAID 1 on a PERC/5i controller because it reported it as failed. After replacing the disc it worked for 5 days and then the controller started ...
0
votes
2answers
98 views

Replace RAID1 Disc - things to consider

One of my RAID controllers is complaining about a harddrive failure: -- Controller informations -- -- ID | Model c0 | PERC 5/i Adapter -- Arrays informations -- -- ID | Type | Size | Status | ...
2
votes
1answer
199 views

How do I find out which disk in a multi-disk mdadm RAID1 triggered a rebuild?

I'm using mdadm for several RAID1 mirrors. md7 is an N-way mirror consisting of 3 spinning disks (all flagged write-mostly) and an SSD: md7 : active raid1 sdd1[0] sde5[3](W) sdf5[4](W) sdc1[1](W) ...
3
votes
2answers
336 views

From which plex am I booted from on raid?

I have a server with mirrored boot volume. It is software raid 1 in Windows Server 2008 R2. I do not have physical access to the server. I am looking for a way to check which disk is a boot drive. I ...
3
votes
2answers
532 views

Linux Software RAID1 Rebuild Completes, but after reboot, its degraded again

I have been beating my head with an issue here, and I'm now turning to the internet for help. I have a system running Mandrake Linux, with the following configuration: /dev/hda - This is a IDE ...
4
votes
2answers
708 views

NAS device claims drive in a RAID is degraded but S.M.A.R.T. says it is fine

I have a Synology DS213 with two 600GB drives in RAID 1. Last night the device reported that my second drive had become degraded and that I should replace it. When I ran a extensive S.M.A.R.T. test ...
0
votes
1answer
147 views

Hardware RAID in CentOS 6.2

I have a ServeRAID-BR10il SAS/SATA PCIe Controller RAID O and 1 Standard. Do you have any suggestions how to install it in CentOS 6.2? All the tutorials I found are only software RAID. Hope you guys ...
6
votes
2answers
292 views

RAID1: Which disk will be mirrored?

How does a RAID1 system determine which disk to use as the source and which disk to use as the destination when mirroring? Assume for instance the following scenario: A RAID1 array is created with ...
1
vote
1answer
146 views

Storage setup on Ubuntu Server used for running virtual machines with software redundancy

I have a server I would like to use explicitly for running virtual machines under Ubuntu Server 12.04. It has plenty of RAM, 64GB and three large identical HDD´s. I would like redundancy through ...
-2
votes
2answers
2k views

RAID 10 vs RAID 1 SSDs [closed]

I'm considering moving a large database from mechanical disks to SSDs. My initial instinct was to go for RAID 10, but further research suggests that this configuration can significantly reduce the ...
0
votes
1answer
482 views

IBM ServeRAID 8k level 1 critical

This is my setup: Lenovo ThinkServer RD140 IBM ServeRAID 8k controller Four Seagate Barracuda 1TB hard discs, organised in two RAID-1 arrays Now the third disk is defunct (orange light flashing). ...
0
votes
1answer
464 views

Rebuild doesn't finish after raid1 disk replacement

In one of our servers one of the disk failed, no worries it happens all the time, we replaced the bad disk following the usual procedure but then ... 'the horror', after adding a new disk one of the ...
2
votes
3answers
1k views

What would happen if I did a raid on a SSD and an HDD?

I am building another server (cheap) and would like to go with a 256GB SSD drive for my boot and data. This will be enough for my needs, but just having one SSD scares me for a couple of reasons. If ...
2
votes
1answer
698 views

Backup data from RAID 1 disk out of its server

I'm facing with a pretty easy problem in my opinion. I've extracted a working disk from a RAID1 and I'm looking to copy only data (FS and RAID configuration doesn't matter) into another location ...
1
vote
1answer
508 views

mdadm: hot remove failed for…

My RAID1 is degraded and I need to replace /dev/sdb. However, I could mark /dev/sdb5 (in /dev/md1) as failed and removed it, but I can't do the same with /dev/sdb1 (/dev/md0 which is mounted on /): ...
1
vote
1answer
222 views

Delete RAID 1 from Debian

i've Debian installed RAID 1 2x 160GB HD, i want to delete it but i'm totally noob in linux, i don't want to install fresh image and start from scratch again, i cannot do backup because i've nearly ...
2
votes
1answer
410 views

RAID 10 or RAID 1 x 2 for Hyper-V with AD, EXCHANGE on Windows 2008 R2

We have 2 servers which have 6 SATA 7200 disks inside (each). We want to configure both servers so that they will have Window Server 2008 R2 Enterprise installed and on top of it Exchange 2010 x2 (for ...
0
votes
1answer
203 views

raid boot error

in boot.log /dev/md1: clean, 320806/58155008 files, 91390310/232603728 blocks /dev/md0 was not cleanly unmounted, check forced. /dev/md0: 32/24384 files (9.4% non-contiguous), 19957/97536 blocks ...
6
votes
3answers
5k views

How to resize RAID1 array with mdadm?

I've running Ubuntu 11.04 (kernel 2.6.38-11). I replaced 2x160GB with 2x500GB drives. They are configured as RAID1. The partition tables show the right sizes. Here's sfdisk: # sfdisk -d /dev/sdb # ...
2
votes
2answers
353 views

Motherboard fried on Windows RAID 1 System, do I have to reformat?

A faulty power supply fried my motherboard and I need some help. I had a spare motherboard lying around and hooked it up to one of the hard drives to see if I could just continue chugging along. ...
3
votes
3answers
923 views

RAID1 performance with madam

I am looking into performance issues we are having. We currently have a 4 drive RAID5 (3+1 fail over) and read performance sucks. Looking at RAID1 with 2 drives (maybe more, any benefit?) but from ...
0
votes
1answer
463 views

Linux (FC14/i386) is raid1 intact after hot fs install? How to repair?

My older (FC11) install had reached EOL, and I tried to reinstall FC14 on its RAID1 root filesystem. I'm now having suspicions that now, after the install FS is not fully raided. The question is if ...
3
votes
2answers
155 views

RAID disk format / transferability between controllers

A couple of RAID questions. I think I know the answers, but just wanted to double-check since I am about to play will several years worth of personal data. Do I understand correctly that: If I have ...
0
votes
1answer
248 views

How to increase size of Raid 1 Allocation?

We had Raid 1 setup with two 1tb drives. I have swapped out the drives and now it was on two 2tb drives, however, the raid array is still only 1 tb in size. Is there a way to increase the size of ...
3
votes
1answer
483 views

Can you use drives while Raid 1 is rebuilding?

I am going to be rebuilding a raid 1 array. While the rebuild is happening can people still read/write to data in the array?
0
votes
1answer
161 views

Switching from Raid1 to Raid10

we are running a Dell Server with a PERC5i Raid card using a Raid1 setup. Now we are hitting a performance problem with our harddrive performance and think about switching to Raid10. Which steps are ...