currently I have Fujitsu tx140 s1p servers, one Tower and one Rack. They are both running with the same hardware, configures the same way, so I'll just ask one Q for both. They have an motherboard ...
I have a HP ProLiant server with two SCSI drives. I wanted to set up a RAID 1 array but the RAID configurator only allowed me a RAID 0 or a RAID 1+0 array. When either of my drive fails can I recover ...
I am consider using windows raid 0 and raid 1 over two hardware 4x2tb raid 5 arrays. (thinking Seagate green drives). 2x Rocketraid 2680 controller but that could easily change. So, that would give ...
I accidentally opened my 1 disk raid1 as raid0 with mdadm --create, and this looks like it overwrote the default raid meta info, and makes my device detected as raid0 with mdadm --assemble --scan. For ...
I have a server that was running two 60GB drives as a logical RAID1. At some point the second drive was physically removed and the logical drive has been in "Interim Recovery Mode" for several months ...
I am soon installing a new pair of drives in one of our machines that exists as a VMWare host box (running VMWare Server at the moment). They are going to be used as a RAID0 array for a couple of ...