I have a Windows 2008 R2 machine configured in software RAID 1 (from Windows disk management) with two HDD 250GB (I know hardware RAID is better, but not possible in this case). Now I want to upgrade ...
Will Windows Server 2008 R2 software RAID volume with “Failed Redundancy” be available during resynching?
In addition to this question: Windows Server software RAID volume constant "Failed Redundancy" I have this problem on my production server too, but im concerned about resynching. If I ...
I used the HP Smart Array Configuration utility to setup a RAID 1 array (hardware P400 controller) using four disks. I created 2 logical drives with physical hard drive 2 mirroring drive 1 (o/s ...
I have a server with mirrored boot volume. It is software raid 1 in Windows Server 2008 R2. I do not have physical access to the server. I am looking for a way to check which disk is a boot drive. I ...
I have a server with two 1.5TB hard drives. I was going to install a Windows Server 2008 R2 and create software RAID1 using Windows Disk Management Utility. I instaleld Windows, open this console and ...
I've a server using INTEL S5520SC motherboard. I was wondering if it's possible to connect 2 SSD 128GB INTEL EXTREME drives in RAID 1 directly to this motherboard or would I need some kind of external ...
I have a Windows Server 2008 R2 x64 system with a single hard drive, and I have a spare hard drive of same size/model that's not being used. I was thinking about dropping in the new drive and setting ...