I haven't been able to find any benchmarks for the following setup: Intel Cherry 520 SSD x 4 RAID10 with LSI 9260 writeback-cache enabled. I'm looking to get 1.5gbps sequential
My datacenter says that each rack has primary and backup power on each rack. I assume this means there is a UPS for each server. Therefore, do I have any need of getting a BBU for the following setup? ...
Since SSD's have a write limit requiring wear leveling one would assume that all things being equal 2 identical SSD drives would wear nearly identically if they mirror data writes. When one drive ...
I'm considering moving a large database from mechanical disks to SSDs. My initial instinct was to go for RAID 10, but further research suggests that this configuration can significantly reduce the ...
I have 6x WD Caviar Black 1,5 TB in Software RAID 10 / 1 / 0 (Centos 6.2 / mdadm) cat /proc/mdstat Personalities : [raid10] [raid0] [raid1] md0 : active raid1 sdf2 sda2 sdb2 sdd2 sdc2 ...