I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm ...
four-disk md raid10-far can be assembled and ran as “clean, degraded” with only 2 disks. Bug or i'm missing something?
Today i was solving raid failure on raid10-far with four disks. One disk failed and another wasn't re-added after a hard reboot. The mdadm -D was reporting it's clean and running with only two out of ...
I saw similar questions, but didn't find what solution to my problem. After power-cut, one of RAID10 (4 disks were) appears to be malfunctioning. I make tha array active one, but can not mount it. ...
I have 4 500GB hard drives. I set up a RAID 10 in BIOS, much like shown here: http://www.supermicro.com/manuals/other/RAID_SATA_ESB2.pdf Then I followed these instructions: ...
I have 4 hard drives, each with two partitions on them 10.1GB for swap and 990.1GB for the rest. I took this and set up two MD devices with RAID10, one for the set of 4 swap partitions and one for ...