RAID 10 is a combination of RAID 1 and RAID 0. RAID 10 can also be referred as RAID 1+0

learn more… | top users | synonyms

0
votes
1answer
30 views

Slow read speed. Raid 10 + H700 (1GB RAM + battery) + 4x 450 Hitachi 15K

So I have installed 4x 450GB Hitachi 15K in Raid 10 (Dell T610 + H700 + mem + battery). I have very simple issue. Read speed is terrible, I have also installed Raid 0 (2x 3TB WD Red) and speeds are ...
3
votes
1answer
1k views

Very poor disk performance on KVM node - mdadm raid10

For a long period of time, i'm experiencing performance issues on CentOS servers that are used for KVM virtualization. I'm running software RAID-10 with 4 disks (Seagate ST2000DM001, 2TB, 7200rpm ...
-1
votes
0answers
8 views

Installing 2008r2 on os drive raid1 & reconnect data drive d: on raid10 with data intact after upgrade

We Have 2 drives on raid1 as os drive, 6 drives on raid10 as data drive. It now runs on 2003... We want to upgrade to 2008 and still keep the raid10 drive intact with current data and reload it into ...
1
vote
2answers
92 views

How to fix my broken raid10 array

I have a RAID 10 consisting of 4x3TB drives. It had become degraded (sdd had dropped off). I thought I had fixed it and it was rebuilding, but now (I think) sde appears to be causing problems. ...
4
votes
2answers
605 views

RAID 10 or RAID 1 x 2 for Hyper-V with AD, EXCHANGE on Windows 2008 R2

We have 2 servers which have 6 SATA 7200 disks inside (each). We want to configure both servers so that they will have Window Server 2008 R2 Enterprise installed and on top of it Exchange 2010 x2 (for ...
3
votes
3answers
3k views

How to create Raid 10 with megacli

I have OpenFiler storage server. Without installing Windows and MSM, I want to create raid10 array from disks 2 to 21. I have already successfully installed MegaCli to OpenFiler but I'm stuck in ...
1
vote
1answer
40 views

How to add a harddisk back in raid10 array?

I have a harddisk that is out of raid array. I wanted to create the partition table on sda basesd on the sdb table and I issued this command: sfdisk -d /dev/sda | sfdisk /dev/sdb --force I know ...
0
votes
0answers
20 views

How can I find out which disks are pairs in an Areca 1680 RAID 1+0 raid set?

After having seen some non-fatal SMART reading errors on multiple disks of an RAID 1+0 on an Areca 1680 RAID controller, I'd like to check if there are disks with reading errors which are in the same ...
2
votes
1answer
186 views

mdadm: Convert RAID10 to RAID1

The machine in question is equipped with 4x ssd, and running Debian wheezy 7.8, linux kernel 3.2.0-4, mdadm v3.2.5. Currently I'm using a RAID10 consisting of all these ssd. I've to increase the ...
-2
votes
3answers
86 views

Can Docker Corrupt a Software RAID Setup? [closed]

I read that software RAID should not be implemented on a machine that also has ESXi virtual machines running. Does this mean that I would want to avoid LVM and or LXC/Docker containers as well on this ...
3
votes
1answer
1k views

Rebuilding RAID 10 array with two failed drives

I have dedicated server with 4 HDD in hardware RAID 10 configuration and It worked fine until yesterday, when It started to crash randomly on couple minutes. I’ve contacted my data center and they’ve ...
2
votes
1answer
3k views

Rebuilding array on 3ware 9690SA-8I

TL;DR version RAID10 array working fine Reboot server as part of maintenance Array inoperable (no access whatsoever) Controller logs say a single drive is bad Remove drive & test - no bad ...
1
vote
1answer
1k views

How to rebuild a dmraid RAID10 array?

Q: How do I force a rebuild? The following describes the scenario. I've been experimenting with forcing a RAID10 to rebuild, so I could see what dmsetup status output should look like when a RAID is ...
0
votes
1answer
196 views

What are the Pros & Cons of Software RAID vs Hardware RAID of 4xSSD(512Gig) in RAID10?

I'm getting this server: Supermicro SuperServer 6018R-TDW It comes with this motherboard: Supermicro X10DDW-i I've decided going with 4xSSD(512Gb) in a RAID10. My server is busy with a demanding ...
2
votes
3answers
1k views

What are the pros & cons of 4xSSD(512Gig) in a RAID10 vs. 2xSSD(1Tb) no RAID?

Lots of read and write operations that my current setup of 4xSAS15k drives in RAID10 is having made me think of a new fast storage. My server is busy with a demanding database, lots of pages, php ...
2
votes
2answers
327 views

RAID 10 Stripe Size for XenServer

Below is our current server configuration. In a few weeks I will be simulating a disaster recovery by installing 5 new disks (1 hot spare) and restoring all VMs from the backups. Will I gain anything ...
1
vote
1answer
3k views

RAID 10: SPAN 2 vs SPAN 4

I am currently configuring RAID 10 (first time doing RAID ever) for a server at work. In the Configuration Utility. I am given the option of either span 2 or span 4. Having never done this before, I ...
0
votes
1answer
87 views

Best span size for 12 x 2TB drives in RAID10

We have just taken delivery of a new JBOD chassis, with 14 x 2TB NL-SAS drives - 2 have already been earmarked for enclosure spares, so we have 12 drives available. I have several options for setting ...
0
votes
1answer
63 views

6 GB/s SAS RAID 10 (6 Drive) vs. 3 GB/s SAS RAID 10 (14 Drive)

I am running MS SQL 2014 Standard and have a Dell MD 3000i iSCSI SAN. Rough specs: Dell R610 With PERC H700 controlling 6 x 2.5" 15K SAS drives (6 GB/s) Dell MD3000i with 14 x 3.5" 15K SAS drives ...
0
votes
1answer
88 views

RAID 1+0 redundancy and data-loss recovery capability against RAID 1

I have a HP ProLiant server with two SCSI drives. I wanted to set up a RAID 1 array but the RAID configurator only allowed me a RAID 0 or a RAID 1+0 array. When either of my drive fails can I recover ...
1
vote
2answers
695 views

LSI Cachecade Pro 2.0 with RAID10 SSD Cache?

I'm trying to add a RAID10 SSD Cache to a VD by this command: [root@livecd storcli]# ./storcli64 /c0 add vd cachecade type=r10 drives=252:4,252:5,252:6,252:7 assignvds=0 Controller = 0 Status = ...
1
vote
2answers
202 views

How does LSI MegaRAID actually lay out RAID10 sets?

I'm trying to set up a RAID10 set on an LSI MegaRAID controller. It is unclear to me how the RAID controller will actually lay out the RAID set on the physical drives. Part of the problem is that ...
1
vote
2answers
171 views

RAID 10: Does it impact performance if I have 24 small drives in Raid10 vs. 4 larger drives?

Does it impact performance if I have 24 small drives in Raid10 vs. 4 larger drives? The root of the question is does it have any performance or redundancy benefit if I fill out all 24 of my bays with ...
1
vote
1answer
214 views

Plextor SSDs don't work reliably in HP DL380p Gen8 servers

We recently purchased a few HP 380p G8 servers to add some VM capacity, and decided to add a pool of SSDs to our standard build, to create a "fast" RAID 1+0 array for some of our VMs that have higher ...
0
votes
1answer
316 views

Adaptec 5405 doesn't rebuild the array for changed disks

I had a 4 disk RAID 10 configuration (as 2 logical arrays) on one of my servers and noticed that the server was down. When I reboot it, one the disks was missing. Talked with the datacenter and they ...
3
votes
2answers
360 views

Software RAID 10 not any faster than s/w RAID 5 on Ubuntu 14.04 box, why?

We are doing some tests on a new database server with 4 x 240 GB SSD disks. From what I have read RAID 10 should be faster than RAID 5 with the same "one-disk loss ok" redundancy. However when ...
1
vote
1answer
591 views

IBM System x3650 M3 - how to expand RAID 10 array

I have RAID 10 array on my IBM System x3650 M3 server - four drives IBM 146GB 10K 6Gbps SAS 2.5". I bought four new drives (also 146GB 10K 6Gbps) because soon I may have problem with free space. Can ...
2
votes
1answer
950 views

Force RAID 1+0 HP Smart Array to rebuild

I have a RAID10 with status "Ready for Rebuild", but how can I force the rebuild? # hpacucli ctrl all show config Smart Array E200 in Slot 0 (Embedded) (sn: PA6C90N9SW82IU) array A (SAS, ...
2
votes
1answer
119 views

Is RAID50 OK for a fileserver?

We have a new storage array consisting of 24 x 600GB 10K SAS disks arriving next week, and I'm trying to decide how best to carve up the available space for our 3-node VMware vSphere cluster which ...
2
votes
1answer
49 views

Failing drive in RAID10 array; which degraded state will be least punishing on performance?

Running on LSi 9260-16i, with 16 SAS drives (Seagate Savvio 15k.2). One drive is getting media read errors, so we're going to RMA it out. Which of these is the least performance destroying option in ...
1
vote
1answer
83 views

Mdadm Raid10 - Files corrupt

I have a Raid10 array using software raid on 4*2-tb drives. My OS on this Raid array froze and when restarting my system via Ubuntu-CD i noticed the Raid array was gone. I assembled the raid array ...
1
vote
2answers
3k views

Expand VD in Raid PERC H710, Dell R720 mini

I have purchased Dell R720 server with PERC H710 Raid Controller. Initially I have configured RAID-10 with 6 SAS 300GB Drives. Installed Win2008 R2. Raid10: After deployment I come to add 2 more ...
1
vote
1answer
70 views

LVM RAID10 “Won't be synchronised” - What does it mean?

I was creating an LVM RAID 10 across 4 physical volumes (each 3TB) when I got the following error message: WARNING: New raid10 won't be synchronised. Don't read what you didn't write! My googling ...
0
votes
1answer
69 views

Why I am the raid configuration tool is now allowing me to create RAID 10?

I have an older dell power edge 6800 server. I have upgraded it a bit and I want to utilize it. So I wadded some ram and some drives. it currently has 12 drives. 2 @ (146gb) 10 @ (300 gb) I ...
0
votes
1answer
40 views

9650SE-8LPML is verifying a RAID 10 unit in odd manner?

I have taken over a server with a 3ware 9650SE-8LPML raid controller, the server has 8 disks and I configured it to be a RAID 10, no spares. My questions is is it normal that when you start the verify ...
1
vote
1answer
121 views

RAID 10 and LVM

I have just setup a new SolusVM Xen Node at my DC. I asked them to install CentOS6 with Software RAID 10 and 100GB to root then the remainder to an LVM group for Xen. All in Software RAID 10. The ...
1
vote
1answer
278 views

Preseed RAID10 does not seem to work

I have this config (excerpt) for my preseed d-i partman-auto/method string raid d-i partman-auto/disk string /dev/sda /dev/sdb /dev/sdc /dev/sdd d-i partman-auto/expert_recipe string \ ...
1
vote
1answer
629 views

6 times slower disk write in RAID10 on Ubuntu 14.04 after rebuild

OS: Ubuntu 14.04 LTS Software Raid 10: 4x120Gb Intel 530 SSDs Initial tests: 1.2 GB/s Write 5.2 GB/s Read I did some tests to check if everything will go alright with a failed disk: I set as ...
3
votes
1answer
312 views

Optimal RAID10 configuration for 8 disks and two volumes?

I have an Open-E file server with 8 SAS disks and a MegaRAID 9271-8i controller and I want to configure two logical RAID10 volumes of identical size. One volume has about 66% write access and 33% read ...
1
vote
1answer
236 views

How to display/define Mirror/Stripping pairs with mdadm

I want to make a standard linux software Raid10 over 4 HDD. The server has 4HDDs, 2 pairs from different vendors in order to avoid batch problems. I want to have the mirror over two different ...
1
vote
1answer
200 views

4096 and 8192 block size read slower than write? by using lsi 9361-8i RAID10

is it possible that 1024 and 2048 block size read speed is faster than 4096 and 8192 block? I'm using lsi 9361-8i with RAID 10 , with 8 x Kingston E50 250G. result: 1024 = Write: 2,251 MB/s ...
0
votes
2answers
294 views

Disk Capacity RAID 1 to RAID 10

I have a 4-bay NAS with two 2TB hard drives in a RAID 1 configuration. I was planning to upgrade it with 2 additional 4TB drives to a RAID 10 configuration. Now the new capacity I will receive with ...
1
vote
0answers
461 views

Expand Raid 10 set on MegaRAID LSI 9261-8i

I have an existing Raid 10 drive with 8 drives. 4 in each span. I can't figure out how to expand the set by adding two more drives, one to each span. I'm using the MegaCLI command line tool. I ...
-1
votes
2answers
2k views

Poor SQL performance on HP ProLiant ML310e Gen8 v2 with raid10

I recently bought HP ProLiant ML310e Gen8 v2 server with 8G's RAM and 4 HP 1TB 6G 7.2k rpm SATA (3.5in) Non-Hot Plug MDL HDD disks. It was surprise to me that HP didn't provide debian drivers for ...
0
votes
1answer
149 views

Downside with moving pagefile to different drive

I've been tasked with managing an old Windows 2003 server which will be decommissioned later this year. I just need to keep the server up and running long enough. The space on the server is running ...
2
votes
0answers
131 views

Why don't enterprise RAID controllers support migration from RAID 5 to RAID 10?

I've been doing some research on the possibility of live migration from RAID 5 to RAID 10 and I'm curious as to why it seems that most RAID controllers (particularly Dell's PERC controllers) don't ...
0
votes
2answers
79 views

Dell T-420 with Perc 310 controller - how do controller channels map to physical drive bays

The Perc 310 has two SAS controller connectors, SAS-A and SAS-B. Each of these supports which has 4 internal mini-SAS, providing a total of eight lanes of PCI Express. Question is how do these two ...
3
votes
3answers
7k views

Configuring RAID 10 using MegaRAID Storage Manager on an LSI 9260 RAID card

Using MegaRAID Storage Manager 13.04 on an LSI 9260 RAID card, which is the correct way to create RAID 10 using 8 drives with maximum redundancy? There appears to be multiple ways to reach the same ...
1
vote
3answers
824 views

SQL Server 2012 RAID Setup and Performance [closed]

At my company we are in the process of setting up a new SQL Server 2012 box. We have 6 physical drives with 3,000 gigs each. We are considering two different RAID configurations and are wondering ...
1
vote
2answers
151 views

Indepedent pairs of RAID 1 is superior to RAID 10

I am rather new to databases. I was reading up on RAID Storage and it seems that the consensus is that RAID 10 is RAID 10 is best is terms of performance and redundancy However at the end ...