I've been doing some research on the possibility of live migration from RAID 5 to RAID 10 and I'm curious as to why it seems that most RAID controllers (particularly Dell's PERC controllers) don't ...
I have a Perc H710 configured as a RAID5 with 4 attached 3TB Seagate 7200rpm hard drives. Two months ago, I got these spurious errors that led me to believe the my controller was bad. I replaced the ...
PROBLEM: My System (C:) and Data (D:) partitions are full and I need to expand them or move them to larger drives. SPECS: Dell PowerEdge 2900 server Adaptec 39320A SCSI adapters Dell Perc 5/i RAID ...
I have a Dell T300 with a Perc 6i, to which 3 500Gb drives are connected. The are assembled into a raid 5 ~1000Gb VD. This setup is working fine, however system is filling up and I would like to ...
I have a PowerEdge 2970 server with a: SAS6i/R Integrated Controller for PowerEdge 2950/2970, x6 Backplane ...
I have just received a new DELL PowerEdge R310 Server and according to my job I need to set up all 4 500GB drives to run using the RAID 5 configuration. When I go into the controller configuration ...