RAID (redundant array of independent disks, originally redundant array of inexpensive disks[1][2]) is a storage technology that combines multiple disk drive components into a logical unit. Data is distributed across the drives in one of several ways called "RAID levels", depending on what level of ...

learn more… | top users | synonyms

2
votes
2answers
198 views

How to identify which hdd to be replaced in RAID

Our RAID5 (using Adaptec 3085) stopped working because one of the hdd is broken. How can I identify which one it is?
0
votes
1answer
348 views

Ubuntu 10.04 RAID 10 rebuild status

I got an IBM x3550 M3 server, with 6x 300GB SAS HDD installed, running in RAID10. Ubuntu 10.04.3 LTS is installed. For RAID card, I'm using ServeRAID M5014. If a HDD is replaced, how can I know the ...
-3
votes
1answer
207 views

RAID 5 Data Loss?

Here is what happend. on a ML 350 with a perc 200i controller, raid 5 with 5 disks. 1 Disk got corrupted , and was was on predictive failure flag. On the replacement of the corrupted disk and after ...
0
votes
2answers
331 views

EDB repair in SBS exchange 2003

One week before in our HP PROLIANT ML370 G5 server with RAID5 one hard disk turned amber and we removed and it is working under degraded state until now. Yesterday morning our users in the domain ...
1
vote
3answers
4k views

HP DL370 G5 hpacucli shows 2 drives as Predictive Failure - safe to try a rebuild 1 by 1?

I have: Openfiler SAN ML370 G5 Smart Array 6400 slot 1 Array B Logical Drive 2 is a RAID5 array of 6 x 148GB 10k hot plug drives making 680GB no spare Last Friday, the power went out, this machine ...
0
votes
1answer
213 views

Setting up separate raid5 on Debian

I want to set up a NAS/share with SAMBA on Debian(squeeze) with Webmin, and i want a setup like this: 2x40GB(IDE), in RAID1 for distro/debian. 4x40gb(SATA), in RAID5 for storage/NAS This is just ...
-3
votes
1answer
102 views

how to know raid 5 disk failed, server is in remote [closed]

the server is remote, cannot see the disk's LED light. The Raid Controller is motherboard integrated. 6 disks build a Raid 5. Windows 2003 Server system. so if one disk failed, how the admin get ...
2
votes
3answers
543 views

ZFS, raidz1: Why is the volume size (42T) so much smaller than the pool size (50T)?

I have a pool of 28 2TB-disks (56T) in 4 arrays of 7 disks. Since it's raidz1 (~RAID5), I'd expect 1 disk to be used for parity in each array, so the resulting volume should be 2TB*4*(7-1)=48TB, ...
7
votes
2answers
2k views

Convert linux software raid from raid5 to raid6

I currently have a file server with 3 1.5TB disks in a RAID5 array. Since it's pretty much full, I got three additional disks (also 1.5TB each). Now I'd like to switch to RAID6 since 6TB space is ...
0
votes
2answers
150 views

Shrink windows server 2008 software raid

I have a windows server 2008 with 5*2TB disks in a windows server software raid 5. I want to shrink the volume down to 3 disks and use the other two disks elsewhere but can't find a guide on how to ...
31
votes
4answers
12k views

Recover RAID 5 data after created new array instead of re-using

Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto ...
0
votes
2answers
298 views

Failed Redundancy for RAID 5 Disks

I'm facing difficulties in regards to some disk issues if you guys can help me. I am using Windows Server 2003 for my File Server. For the past few days in Disk Management the status of two of my ...
0
votes
2answers
400 views

Installing VMware vsphere 5 on multi raid array server

We recently bought a new server that came with 2 600GB disks in a Raid 1 and 5 2TB disks in a raid 5. Initially this was going run Windows Server 2008 R2, however, it was decided to now run VMware ...
0
votes
2answers
386 views

raid5 samba upload write slows down

I have Samba installed on a server, that has 8 2TB HDDs in raid5, os is debian 2.6.32, 64bit. When I copy a 3.5GB file to the server, the first GB is transferred with about 100MB/s, but afterwards the ...
0
votes
1answer
154 views

Software Raid 5 in Enclosure - Server Crash - Hope?

I'm a software guy. I have inherited a Windows 2008 server that had a 4 disk raid enclosure (one of those Rosewill ones from NewEgg I think) connected to it via eSata. The Windows server was ...
3
votes
6answers
774 views

Server RAID died. How would you recover data from its drives?

We have 9 machines at the moment. One of them had an electrical fault which fried the board but the drives seem ok. I'm not entirely sure how I would even attempt to recover data from it. The drives ...
1
vote
2answers
136 views

NAS Hard drive configuration advice?

Just got a 4 bay NAS. I want to set it up as optimal as possible. I was thinking of getting 3 x 1TB hard drives and setting up as RAID 5. The disk usage will probably be around 1TB max but there is ...
-2
votes
2answers
548 views

Ideal RAID1+RAID5 configuration?

What is the optimal RAID1+RAID5 configuration and why? My thinking is: RAID 1 SAS 15k 146GB drives for the OS. RAID 5 SATA 7.2k 300GB drives for the data. My opinion is that the OS partition should ...
1
vote
1answer
198 views

Linux software RAID-5: failed drive doesn't degrade the array

I have a CentOS 6.0 install sitting in a Hyper-V VM. I'm trying out some of the software RAID features of Linux and I've got a RAID-5 array made up of virtual SCSI disks. Most of it works fine: if I ...
5
votes
3answers
3k views

Is it safe to transfer RAID 5 disks from one server to another?

I have (what I assume) will be a relatively simple question. I have an old file server that I've decommissioned and replaced. I would like to re-use the hardware from the old file server at our ...
-1
votes
1answer
1k views

mdadm and RAID-5 recovery

I am encountering some problems with my RAID-5 array, using mdadm and Debian. First of all, I lost a drive (completely, it is not even recognized by the BIOS), then I replaced it with a new one; ...
4
votes
4answers
240 views

Is it safe to mark a disk ok, in a degraded raid 5 array?

Intel Matrix Storage Console 8.9 showed a degraded array with one disk failure. Yet it offers the option to mark the disk as ok and rebuild the array? When would it be appropriate to do this? Does it ...
0
votes
2answers
195 views

Increasing capacity of RAID5 array [closed]

Assume that I built an 2TB RAID5 array and its running and some data is stored on it. Now I need to increase its size to 5TB. Can I increase capacity (By adding extra drives)? How? If Yes is it ...
1
vote
1answer
922 views

Trouble resizing LVM volume after expanding Areca 1220 RAID 5 array

Thanks ahead for any help. My original setup was an Areca 1220 RAID card with (5) 2TB drives in RAID 5 with a hot spare, making only 4 of them part of the array for a total of 6TB. I then created an ...
1
vote
1answer
271 views

Add Automatic hot spare to Windows raid5

Ive been searching all over and cant find anything on this subject. I have a Raid 5 configured in Server 2003 using 3 1.5Tb drives, I have a 4th drive I want to add as a hot spare and I would need to ...
-4
votes
1answer
559 views

Debian Squeeze with RAID 10

I'm trying to do a fresh install of Debian Squeeze on a server and set it up with RAID 5, or RAID 10 if possible (4 disks). I'm having difficulty finding detailed instructions on how to do this. I'm ...
3
votes
1answer
691 views

Configure Windows RAID-5 “drive failed” timeout?

When a hard-drive controller detects an error, and needs to remap a sector, the drive normally becomes unresponsive for the seconds (or possibly minutes) it takes to try to complete the re-mapping. ...
0
votes
4answers
3k views

How long should a RAID Reconfiguration take? (Adaptec 6805)

I'm experimenting with various RAID configurations of a new Adaptec 6805 (not the 'E' model) Attached are 8x Hitachi 5400RPM 2TB SATA 6Gb Drives using the miniSAS to SATA cables provided. I created ...
0
votes
1answer
749 views

Windows 2008 R2 raid 0 over hardware raid 5

I am consider using windows raid 0 and raid 1 over two hardware 4x2tb raid 5 arrays. (thinking Seagate green drives). 2x Rocketraid 2680 controller but that could easily change. So, that would give ...
2
votes
4answers
1k views

2008 R2 Software Raid 5, writing during resynching

I'm build a software Raid 5 under Windows server 2008 R2 with 4 x 2TB SATA2 (i3-540 4GB) I launched the process 24h ago, but the resynch progress is 27% only; - Is there a problem, or is it a normal ...
0
votes
2answers
1k views

Debian squeeze, mdadm. Degraded RAID5 array after each reboot

/etc/mdadm/mdadm.conf ARRAY /dev/md0 level=raid5 num-devices=4 metadata=00.90 UUID=54e55d36:c3971e21:d484c166:6e86c3d7 devices=/dev/sdb,/dev/sdc,/dev/sdd,/dev/sde MAILADDR root mdadm -D ...
1
vote
1answer
255 views

Intel RAID Controller Rebuild RAID 5 While Windows Running

We have a RAID 5 array (3 drives) one of which failed this morning. If we take that drive out the system can boot into Windows Server '03 fine. Problem being we don't have anywhere to go if another ...
1
vote
2answers
134 views

Windows 2k3 server RAID 5

I've got a server at home running Windows 2003 Server. I use the server to house my media collection and backups from other PCs on my LAN. The server has 4 1TB drives along with a smaller system ...
1
vote
2answers
291 views

Can I do a Raid 5 with a SAS6i/R?

I have a PowerEdge 2970 server with a: SAS6i/R Integrated Controller for PowerEdge 2950/2970, x6 Backplane ...
1
vote
1answer
155 views

How can I upgrade the disks in my RAID 5 array on our primary server?

Our domain server/file server has a RAID 5 setup with (3) 450 GB drives configured as 900 GB disk, which is broken into two logical partitions a 25 GB boot partition and an 875 GB storage partition. ...
3
votes
2answers
3k views

How can I view Server 2008 Software RAID 5 Resync Progress?

Skipping over the pros/cons of RAID 5, I have a software RAID-5 array made from 3x 2TB disks. I started the sync and nearly 12 hours later the sync is still going. Is there any way that I can view the ...
3
votes
2answers
627 views

Replacing a Hard Disk in RAID 5 Array with Newer Version

Recently, 1 out 4 disks in my RAID 5 array failed. I searched for a replacement part and learned that only a newer version of the hard disk is available. This "newer" version has the exact same specs ...
2
votes
1answer
744 views

Windows Server 2008 R2 software Raid-5 slow over network

I'm using Windows Server 2008 R2 for my file server. I put a 7x1TB software raid-5 on it, and let it resynch. OS is installed on a separate disk. Now I'm getting very poor write speeds to the raid ...
0
votes
2answers
351 views

NAS software options?

I want to build a NAS that supports hard links (linux based, NFS?) due to the software that will use it. I need some kind of RAID in case of a single drive failure. I really like FlexRaid, but it ...
1
vote
1answer
476 views

Can I resize a software RAID-5 in Windows Server 2k8 R2 Enterprise?

I want to add a fourth disk to my software storage RAID in server 2k8 R2. I'm not seeing any way to do this with the built in disk manager, Paragon Partition Manager, or EASEUS Partition Manager. Is ...
5
votes
2answers
4k views

Ext4 superblock corrupted after successful(?) mdadm grow and resize2fs

Some system details AMD Phenom II X6 1090T, 16GB DDR3 1600 running 11.04 natty, 2.6.38-8-server Raid in question consists of 5 SATA drives; 4 Samsung, 1 Western Digital; 500 GB each Drives are ...
4
votes
5answers
2k views

How should I sanitize a SAS drive that I removed from a RAID 5 Array?

I had a disk experience a predictive failure. As a result, I removed the drive and replaced it. Now that I have the drive removed, I would like to sanitize it. What is the easiest way to go about ...
0
votes
2answers
213 views

shell script to get raid controler details

How can I get the RAID 5 controller array details using a shell script command?
3
votes
4answers
952 views

Running swap on RAID10 or RAID5?

In follow-up to this previous question (and it's excellent answer), I am curious to know if running swap on a RAID5 might not be better than on a RAID10. My thinking is that you might lose a bit on ...
0
votes
1answer
236 views

Create superblock for software raid-5 array

I have created a raid 5 array with mdadm. I created partitions on all five of the disks created a raid-5 array with mdadm on these five partitions). Everything seems fine however when i try to mount ...
1
vote
2answers
837 views

Smart Array E200 - merging logical drives

Server has Smart Array E200 RAID controller with 8x 146GB SAS 10k drives: I have two logical drives. First set is RAID5 with 3 drives and second set RAID5 with 5 drives. Is there a way to merge ...
1
vote
3answers
847 views

Problem with RAID5 (mdadm) - disk detached

Having these lines in /var/log/syslog Apr 18 16:53:05 Server kernel: [4487878.816036] ata4: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 Apr 18 16:53:05 Server kernel: [4487878.816058] ata4: ...
1
vote
1answer
127 views

Can I replace a failed RAID disk with a used spare?

I have a Dell PowerEdge 2650 with hardware Raid - two drives in Raid 1, four drives in Raid 5. Originally, all six drives were the same size, but a while back I upgraded the Raid 5 array and kept the ...
0
votes
3answers
546 views

SATA I on 4x 2tb RAID5 array does it matter its 1.5gbs SATA I not 3.0gbs SATA II

Just installed 4 2tb Hitachi 5K3000 drives into a IBM x3500 7977 server. It's got a adaptec 8k serveraid card. Turns out it doesn't detect the drives as Sata II 3.0gbs. It only see's them as Sata I ...
2
votes
2answers
348 views

Sources of bottleneck for Linux RAID5 software array

I created a 7-drive RAID5 array with mdadm and put LVM2 on the array should I want to expand it in the future. I formatted as XFS. I basically followed this tutorial line for line: Easy to expand ...