I had some problems with my RAID 6 drive on mdadm recently. No LVM in between. Two drives died, and were pulled out while the machine was powered down. Now, I boot up the system, and cannot mount the ...
I have a RAID60 that I want to expand. The current is: 2 axles each having 9 disks + 2 spares. The future is: 4 axles each having 10 disks + 1 spare. So I need to do some --grow to reshape the ...
This is similar to 3 drives fell out of Raid6 mdadm - rebuilding? except that it is not due to a failing cable. Instead the 3rd drive fell offline during rebuild of another drive. The drive failed ...
i had an mdadm raid6 array with 13x1TB drives. Within 10 minutes 3 of these drives fell out of the array... we assume bad cable to the controller card and replaced, however now we need to get the ...
Wikipedia says "RAID 2 is the only standard RAID level, other than some implementations of RAID 6, which can automatically recover accurate data from single-bit corruption in data." Does anyone know ...
I currently have a file server with 3 1.5TB disks in a RAID5 array. Since it's pretty much full, I got three additional disks (also 1.5TB each). Now I'd like to switch to RAID6 since 6TB space is ...