Red Hat is an open source technology solutions provider with offerings including Red Hat Enterprise Linux, open source applications, security and systems management, virtualization, Services Oriented Architecture (SOA) solutions, server and desktop operating systems, Java application software and ...

learn more… | top users | synonyms (1)

3
votes
0answers
105 views

Not Able to Mount USB HDD in Linux

I'm having a problem with a server that I just installed kernel 2.6.18-371.el5 on. It's an old kernel for Red Hat 5, I know, but due to certain "restrictions" I am forced into using that for the time ...
3
votes
0answers
165 views

Unusually high nfs_inode_cache

My server is experiencing a high usage of nfs_inode_cache = 11G , im trying to figure out what's consuming all this , i know already that directories with large numbers of entries and deep directory ...
3
votes
0answers
467 views

Broadcom BCM57810 iSCSI offload performance

Anyone out there doing iSCSI offloading using Broadcom BCM57810 10 gigabit ethernet cards? My test scenario Network.... 2 x Dell Force 10 S4810 switches Client.... Dell R620 24 core 128gb memory ...
2
votes
0answers
518 views

CentOS kickstart automated setup with parted / RAID

I'm trying to use parted to partition my entire drives automatically during the CentOS kickstart install, however, I'm getting two issues with my install. I want to kickstart my installs across ...
2
votes
0answers
489 views

RHEL 6.5 web application PAM AUTH pam_oddjob_mkhomedir

I've got a RHEL 6.5 that authenicates against an AD server, that side is working fine. The machine is also running a web application that uses a PAM module to authenticate. I copied login to make a ...
2
votes
0answers
33 views

PIV authentication on redhat

I'm looking for a solution, or set of technologies, (etc) - for setting up a mixed (win 7, rhel 6.5) network with centralized login using smart cards (PIV). I know that this is possible using a ...
2
votes
0answers
63 views

SNMPget and bash gives strange results (gauge32 values incorrect)

Reallly strange to me but here is the problem. If I use an SNMP client such as ManageEngineMibBrowser to query the appliance I get what look like reasonable Numbers: dpStatusMemoryStatusUsage.0 97 ...
2
votes
0answers
89 views

Lots and lots of kernel log entries: iint_free: readcount: -1, iint_free: writecount: 1

I am getting tons of log entries of the form Mar 2 00:44:10 SRV123 kernel: iint_free: readcount: -1 Mar 2 00:44:10 SRV123 kernel: iint_free: writecount: 1 Mar 2 00:44:10 SRV123 kernel: iint_free: ...
2
votes
0answers
43 views

Does the LVM DM UUID contain any metadata?

For example within the name listed below is there any metadata within the name, eg based on server serial number or date created or such: ...
2
votes
0answers
258 views

ZFS on RedHat configuration

I have to set up a ZFS storage appliance (Oracle ZFS Storage ZS3-2) with NFSv4. The NFS is mounted on a Redhat 6.5 cluster, where the linux users are created (they don`t exist on the appliance). ...
2
votes
0answers
203 views

Set Linux GID based on LDAP OU in ldap.conf

In our company we have a given LDAP Server, which represents the Users of our Windows Active Directory. Unfortunately the gidNumber sent to the LDAP client is always containing the Value "1001" for ...
2
votes
0answers
866 views

Completely remove and reinstall Foreman RHEL 6

I have a RHEL 6 host I inherited on which I need to install Foreman stable. It previously had Red Hat's OpenStack "Technology Preview", which relied on Puppet 2.5 and was not useful for permanent use. ...
2
votes
0answers
160 views

Redhat 6.4 configured to log Martian packets but is not logging ll header

I am trying to investigate the source of martian packets I have been seeing on several servers connected to the same subnet. The logging of martian packets has been enabled in /etc/sysctl.conf. ...
2
votes
0answers
266 views

setup static route via dhcp

I try to push static routes over dhcp in a redhat enviroment. I have already activatet the option rfc3442-classless-static-routes. The dhcp client is also configured to request this optien as ...
2
votes
0answers
230 views

Phusion Passenger setting PassengerPreStart does not activate using service httpd start

I'm running Phusion Passenger on RHEL, hosting a Rails application. I can successfully start up a passenger instance on Apache startup using the Passenger setting PassengerPreStart, but only if I ...
1
vote
0answers
22 views

Cannot install mysql server - Error in PREIN scriptlet in rpm package mysql55-mysql-server-5.5.32-3.el5.x86_64

I am trying to install mysql server 5.5 (or any 5.x versions) on Redhat 5.5 and am having some trouble. I can install the other mysql components but when I try to install mysql-server (or ...
1
vote
0answers
155 views

Powershell execute Queries using SQLPLUS

I have a RHEL server with Oracle 10G installed. I need to write a powershell script to query my database and get the output. I have imported Posh-SSH module and am able to connect to my RHEL server ...
1
vote
0answers
20 views

Is it possible to add support for additional OIDs in SNMPD (RHEL)

I am trying to have my monitor poll the number of ESTABLISHED TCP sessions on a Linux server that is running snmpd. The OID information I am trying to poll can be found Here . The OID is ...
1
vote
0answers
17 views

Kerberized root user on RHEL 5/6

I'm currently involved with getting NFSv4 and Kerberos. We've decided to bite the bullet and try and make the transition. Our environment is: Windows AD LDAP auth on Linux against said AD. ...
1
vote
0answers
72 views

What can cause an entire Red Hat server to “hang”?

We've got two Red Hat servers which "hangs" at regular intervals. The systems become unresponsive for 20 - 30 seconds, and then return back to "normal". The systems are not virtualized, and runs on ...
1
vote
0answers
138 views

Copying from NFS mount crashes Linux client machine

I have NFS share mounted on CLIENT in /etc/fstab: SERVER:/share on /mnt/share type nfs (rw,users,noexec,nosuid,nodev,timeo=14,hard,intr,addr=1.2.3.4) Intensive use on client like copying a lot of ...
1
vote
0answers
214 views

Unable to Configure Quotas in RHEL6 & CentOS6- quotecheck returns error message

Unable to Configure Quotas in RHEL6 & CentOS6- quotecheck returns error message I've created new partition(/dev/sda6) and mounted it(on /hulk). Edited /etc/fstab file to give quotas on the ...
1
vote
0answers
135 views

SSH hangs on remote command execution after prompting for password

I am able to execute remote commands as the root user, but not unprivileged user "admin": [user@jump01 ~]$ ssh admin@10.50.11.1 'ls' admin@10.50.1.1's password: ^CKilled by signal 2. [user@jump01 ...
1
vote
0answers
156 views

Naming convention for /var/lock/subsys on sysvinit with multiple pids

In this Tips and Tricks article from Red Hat, it is said: When a service is started through an init script, a file is touched in the /var/lock/subsys/ directory with the same name as the init ...
1
vote
0answers
36 views

Apache Internal RE-WRITE to replace 301 redirect

I need to internally rewrite (due to partial CMS content restructure) as I currently have a permanent 301 redirect and it is killing SEO. I do not want the users browser to redirect or know about the ...
1
vote
0answers
758 views

DHCP_HOSTNAME isn't working consistently in RedHat 7

Under RedHat/Centos 6.x I used DHCP_HOSTNAME=`hostname -s` in /etc/sysconfig/network-scripts/ifcfg-eth0 to pass client hostname to DHCP for registration in DNS and this worked flawlessly. I'm now ...
1
vote
0answers
119 views

RHEL Equivalent of AIX's chuser login=false rlogin=false

On AIX, I can disable login/remote login by setting the attributes listed to false, but I will still be able to su from other users, and sudo as the user. Is there an equivilant in RHEL to the ...
1
vote
0answers
96 views

Red Hat 6.5- sysctl -w net.ipv6.conf.default.accept_redirects=0

I am in the process of writing a Red Hat 6.5 Kickstart disc with hardened security. I have run a program to determine where the weaknesses are in my system, and apparently there is a medium severity ...
1
vote
0answers
36 views

Redhat quitting process never works always have to kill it

I am working on a RedHat server creating a unicorn process. I have two sets of these processes being created. I am able to QUIT one of the process fine and do so over and over again create it and QUIT ...
1
vote
0answers
212 views

VPNC cisco + quick mode response rejected error

I installed a vpnc on my Linux red-hat machine version 6.3 Most of the cases vpnc work well ( connecting to gateway customers by vpnc ) But against some particular customers ( Cisco gateways ) , ...
1
vote
0answers
83 views

Unable to access disks in rhel 6.5

I work for a biology lab. We recently bought a new microscope that produces an enormous amount of data - it is simply not feasible to store it on a desktop. So, we bought a storage server - the idea ...
1
vote
0answers
1k views

Connecting to MSSQL server using sqlcmd and odbc driver on RHEL 6 fails

I spent the last hour trying to connect to a mssql server using sqlcmd through odbc driver. I was talking to the db guy but he doesn't seem to have a clue what is going on.. Maybe you can help me out ...
1
vote
0answers
107 views

Red Hat Virtualization, slow DB writes or network from virtual machine

I am running JBoss on both a physical machine, and a VM that runs within that same physical machine. The JBoss instance on physical machine is operating fast, but the JBoss on VM is slow (several ...
1
vote
0answers
204 views

Backup RHEL 5 Web Server Disk and DB Data to USB Drive, Best Way to do this?

We are using a dedicated web server with Redhat Enterprise Linux 5 installed, we are using this to host a couple of our websites. We asked our host to attach an external USB hard drive to our server ...
1
vote
0answers
127 views

Red Hat Enterprise Linux 4 - free -m shows high memory used in second line but no process actually uses memory

I have a Red Hat Enterprise Linux. I understand that top can show high memory usage, which is fine. free -m shows below output: $ free -m total used free shared ...
1
vote
0answers
98 views

Robustness of installing from deb on RHEL

How robust is the method of converting .deb packages to RPM using alien and then installing on RHEL/CentOS with yum? What are best practices to manage the process? I have used Debian for several ...
1
vote
0answers
124 views

BIND caches ENUM NAPTR records irrespective of TTL 0

I am using BIND 9.6 to enable my application to act as a ENUM server. The ENUM server performs routing and responds to ENUM NAPTR records. The NAPTR responses are sent with a TTL zero without any ...
1
vote
0answers
134 views

Best way to bind multiple RHEL 6 Systems to AD and use NFS?

I am currently migrating systems to an AD domain using winbind. This works fine but I have discovered that NFS mounts don't have proper permissions because users and groups end up with different ...
1
vote
0answers
385 views

MySql/RedHat, High I/O Wait … for a few hours… then disappears

I've got a RH server as a VMWare instance logging GPS fixes 24x7. The transaction volume hasn't changed over the months (in fact I am pruning the transaction table more aggressively now) with only ...
1
vote
0answers
392 views

Spacewalk/Satellite Server - spacewalk-create-channel

I have a Spacewalk installation and I have mirrored the RHEL6 base repo on my server using mrepo. I created a channel using spacewalk-create-channel --user=me --server=localhost --version=6 \ ...
1
vote
0answers
237 views

Cobbler import of RHEL6 DVD doesn't seem to create yum repo

I setup cobbler (2.4.0) and imported the RHEL6.4 DVD. It copies all of the packages over to /var/www/cobbler/ks_mirror/RHEL6.4-x86_64. It even runs createrepo and loads the metadata, etc. So you ...
1
vote
0answers
62 views

multipath -l vs -ll

What system information is multipath -ll reading that multipath -l does not? From the RHEL DM Multipath Guide -l Display the current multipath configuration gathered from sysfs and the device ...
1
vote
0answers
139 views

Xvfb on RHEL6 - can't find the package

This looks like an already discussed subject, but, I can't find any solution for it, so, I gonna try it again. I look some questions and try all the given solutions, with no success. I tried to ...
1
vote
0answers
331 views

UDP socket receive buffer size change on RHEL6.3

Our system used to work on RHEL5.3 And the socket receive buffer size is 64k. And that works fine. We can get message size up to 64k on UDP socket. But after system upgrade, it is running on RHEL6.3 ...
1
vote
0answers
165 views

Processes getting stuck on 2 servers that have just updated

Just last night, ran a yum update on a couple of RHEL servers, I did manage to get a list of the packages but at least one of them seems to have caused a big problem. The issue is that SSH to both ...
1
vote
0answers
305 views

Enable bcrypt hashes for /etc/shadow in RHEL, CentOS, or Amazon Linux

Is it possible to add bcrypt support for system accounts (e.g., in /etc/shadow) in Amazon Linux? (Which is in turn binary compatible with RHEL5 and CentOS 5) This only looks like a duplicate of this ...
1
vote
0answers
2k views

NERR_DCNotFound when attempting to join Windows Server 2010 domain using PBIS

I have a RHEL 6.3 Amazon Web Service instance I'm trying to join to a Windows Server 2012 AD domain through PowerBroker Identity Services Open (ie: not enterprise). The Server 2012 instance is in the ...
1
vote
0answers
387 views

mysqld service crashes on restart, after importing mysqldump #innodb

I have 2 mysql servers. Let's call them server01 & server02. Both have the same configuration: mysqladmin Ver 8.42 Distrib 5.1.61, for redhat-linux-gnu on x86_64 [client] ...
1
vote
0answers
47 views

Can I specify a bundle deployment order in RedHat JON Server?

RedHat's Jboss ON Server is a way of managing "bundles" of software and web applications. Can one specify the order in which bundles must be deployed? We have a set of bundles which bootstrap a ...
1
vote
0answers
35 views

Does redhat have any jdk configuration tools?

Red Hat seems like a very inconvenient environment for java. On other distributions like debian and gentoo there have been system wide config tool for many years. On red hat there's seems to be ...