Questions tagged [remote-access]

Questions about accessing a system or network from a remote computer or location. Consider using a more specific tag for your particular tool, e.g. VNC.

Filter by
Sorted by
Tagged with
0 votes
0 answers
31 views

Unreasonably slow SSH tunnel - but just in the opposite direction

While setting up rsync to a remote computer, I realized that syncing from my laptop the remote was fast, but the opposite was slow. After some debugging and iperf3, I figured that this only happens ...
doppioandante's user avatar
0 votes
0 answers
38 views

strongSwan: Accessing LAN of a Windows client (reversed remote access)

I am currently having an Ubuntu Server strongSwan setup (IKEv2, EAP-MSCHAPv2) that will allow any authorized remote Windows client to access server's LAN (192.168.7.0/24). It works perfectly, but I ...
ivanthestupid's user avatar
0 votes
0 answers
61 views

SSH keeps timing out when trying to connect to remote server

I am trying to connect to a remote server via ssh. I have done it previously without any problem. However, recently, most of the time when I ping it, it just says "request timed out" - there ...
Coco Zeng's user avatar
0 votes
0 answers
56 views

Configuration to remote-site networking

Sorry if I miss some things or are unclear, I'm a bit noob in network. We have this configuration of network: I can't change local IP of remote site machine. I can't use IPV6 because of software that ...
Maxime's user avatar
  • 1
0 votes
1 answer
81 views

VPN setup multi-user multi-network topology

Context I am trying to understand how to best setup VPN access for a group of users and networks. The situation is represented by this network schematic: Site A represents the main network I have ...
Bonvi's user avatar
  • 13
2 votes
0 answers
565 views

Remote filesystem, performance and caching (davfs vs cifs vs sshfs)

I'm hosting files on a Hetzner Storage Box. As for mounting those remotely, i have the choice between WebDAV, CIFS or sshfs. Once mounted, those files will be accessed by liquidsoap. The problem here ...
Domovoy's user avatar
  • 21
0 votes
2 answers
737 views

How to change MS-SSTP (RRAS) server port?

I have a webservice on port 443 and 80 in IIS. I want run SSTP Server on port 8443. How can I change the default port (443) to 8443?
Pouyan Danesh's user avatar
0 votes
0 answers
105 views

Is it possible to check the latency of internet connection to a of a remote location?

I plan to travel to a distant location and access a high performance computing system (located at where I currently am) while I have arrived at my destination then. However, I am worried about the ...
蕭力諶's user avatar
  • 101
0 votes
1 answer
96 views

Winexe error NT_STATUS_LOGON_FAILURE executing script from Linux to Windows Server 2012

I've installed winexe on my linux machine. I want to use it to execute some script on a Windows Servre 2012. It doesn't work, the error is NT_STATUS_LOGON_FAILURE. I've followed this guide to install ...
dario59's user avatar
1 vote
1 answer
598 views

My Win 11 Pro VPN client for IKEv2 is perpetually broken

I am tearing my hair out over this sudden refusal of Windows 11 Pro on my PC to use the appropriately configured crypto in IKEv2 negotiation. It worked fine for a long time, until it didn't. This ...
TheOrionArm's user avatar
0 votes
0 answers
56 views

Is it possible to pass all physical audio device to a RDP session?

It seems like when I RDP only the default device is used in REMOTE AUDIO on the device selection on the RDP server. I have several audio device and I want to redirect them all it that something that ...
Tony NG's user avatar
1 vote
1 answer
185 views

"Non-Open-Mail Relay" Postfix / Dovecot are relaying anyway; Mis-configured or CRACKED? Plus, presently blocked external users need access too

CRITICAL UPDATE While working on this, there'd been no spam relayed for over a single day so I left it up and overnight, TWO emails got relayed! ACK! Here they are, from my tail / grep commands (...
Richard T's user avatar
  • 1,242
0 votes
1 answer
234 views

Can Firefox or Chromium (as of 2023) be tricked to accept SSLv3 for a specified local IP (an old iRMC)?

I'm fiddling around with an older Fujitsu server running iRMC S3. The integrated webserver does only allow SSLv3 to be enabled due to it's age and can of course not be updated beyond it's current ...
datenheim's user avatar
  • 103
0 votes
0 answers
886 views

ssh illegal option while trying to connect to remote server

trying to ssh from my macbook pro, to a remote server, ssh ayan@ServerIPAddress gives the following error ssh: illegal option -- ? usage: ssh [-46AaCfGgKkMNnqsTtVvXxYy] [-B bind_interface] ...
Ayan Mitra's user avatar
1 vote
1 answer
257 views

Can I give DirectAccess clients IPv4 addresses instead of or along with IPv6?

I started a new company that is all remote. They have never had a true IT person, and I am coming to realize what a challenge full-remote is for things like GPOs, internal DNS, and basic management. I ...
alexander7567's user avatar
1 vote
3 answers
6k views

Enter-PSSession: receiving access denied on non domain remote server

I am struggling to open a remote PS session on a remote server (Windows Server 2022 Standard). The remote server is not part of a domain. When running the command Enter-PSSession -ComputerName ...
Abid's user avatar
  • 135
1 vote
1 answer
2k views

SSH will not use password authentication, still tries disabled methods

I'm running Fedora 36 Workstation with OpenSSH server 8.8p1. I want to log on a single remote user and authenticate with their password, but OpenSSH seems determined not to let me. I've tried every ...
tmoore82's user avatar
  • 121
1 vote
1 answer
97 views

how to do remote access in virtualbox (configure as bridge) with ipv6

I installed Ubuntu Server 22.04 in a VirtualBox set up as Bridge. ipv4: 192.168.55.226 ipv6: 2804:389:a09c:d31a:a00:27ff:feca:3cad How do I remote access my virtualBox by ipv6? 2804:389:a09c:d31a:...
Gilberto Sudario's user avatar
1 vote
0 answers
686 views

MariaDB 10.5 refusing remote connections

I've gone through a lot of tutorials and questions and I still can't get it to work. I installed MariaDB 10.5 on a Debian 11 server. We changed its IP address yesterday and since then we cannot do a ...
Victor Leal's user avatar
0 votes
0 answers
955 views

Alternative to x-forwarding, or how to speed up x-forwarding

I do my development on VM's, and pass windows back to my Host via X-forwarding with the following command: ssh -Yc [email protected] me@local-vm-ip This works fine except that it tends to be slow;...
Snappawapa's user avatar
1 vote
0 answers
138 views

Multiple RDS farm session hosts for load balancing?

I am setting up an RDS farm, intending to host terminal access software for access to a mainframe. We'd like to set up multiple RDS servers for redundancy and load balancing. To accomplish this, is it ...
jmahood's user avatar
  • 11
0 votes
1 answer
1k views

Can I see a printer's log about who connected to a network printer?

There's been a problem at work about a given printer that you have to connect to using a printers' server. I don't control the server itself, but if there's a log that I can require to the server ...
newbie's user avatar
  • 101
0 votes
0 answers
1k views

ERROR 2003 (HY000): Can't connect to MySQL server on '1.2.3.4' (10060)

I've tried to look for a solution and there are many similar questions but somehow none of the solutions are working. I have a laravel app running on one of my ubuntu servers at 1.2.3.4 IP. I ...
Afifa's user avatar
  • 1
0 votes
1 answer
688 views

Configure Routing and Remote Access, Windows Server 2016

I have a Windows Server 2016 and it is a virtual machine on a VPS. I got this error message when I tried to configure Routing and Remote Access Incoming connections are currently enabled on server. ...
Fred's user avatar
  • 101
0 votes
0 answers
63 views

Can connect one remote server to MySql, but cannot connect two servers

I am trying to finish a website creation using three servers with Linux. For simplicity, I will identify the servers as server 1, server 2 and server 3. I am using MariaDB. All three servers are ...
Charlie's user avatar
2 votes
3 answers
557 views

How to share a computer between several remote users simultaneously? [closed]

There is a highly specced computer (Intel based) we want to be used by several users, to run certain software (the software requires a lot of CPU and RAM, which is the reason they are not running it ...
David Balažic's user avatar
0 votes
0 answers
137 views

Remote SSH Server, No Firewall NAT Allowed, Teamviewer Like Solutions?

I have a server (Linux,SSH) sitting inside of a remote company. It is installed on a secured / isolated part of their network but has internet access. We need to manage it, but can not get a firewall ...
MadHatter's user avatar
  • 101
1 vote
1 answer
127 views

Access remote network with OpenVPN server

I am currently trying to configure OpenVPN to access our company network remotely. I have a question: when I configure the "client.ovpn" file, what should I put as Ip in this parameter: ...
hamza youssouf's user avatar
0 votes
0 answers
1k views

Does Apache Guacamole support VNC Connection with GNUTLS?

Currently I've working on my custom Remote Desktop Service which is strongly based on Apache Guacamole. I want my whole session encrypted with TLS when I enter Guacamole and connect to my PC with a ...
redjen's user avatar
  • 1
0 votes
0 answers
201 views

SSL certificate available to IIS but cannot be selected for VPN (Win2022 Server)

I have installed a wildcard SSL certificate on a Win2022 Server for use for both web (IIS) and VPN authentication. I let Windows choose the appropriate certificate store, but for good measure I ...
aag's user avatar
  • 407
0 votes
1 answer
861 views

pfSense as IPSec remote access client

I have a pfSense router in a residential environment and need to use IPSec/IKEv2 as a remote access client to a commercial VPN provider. I know the pfSense web UI doesn't support the router being the ...
joe_shmo's user avatar
0 votes
1 answer
636 views

Can't access RDS instance externally

I've spun up an RDS postgres database in an existing VPC (which has both public and private subnets - connected to a NAT gateway) which I've set as publicly accessible. I've added the relevant IP ...
Mike's user avatar
  • 23
0 votes
0 answers
99 views

GoogleVM - Remote Desktop Connection Error

Can't connect to Google Server using Remote Desktop Connection in Windows 10. The error is "An internal error has occurred".
Anonymous's user avatar
0 votes
0 answers
1k views

The ssh agent cannot 'resolve hostname' when called from within a bash script

I have a bash script #!/bin/bash scp -r some_directory remote_host:~ which I made executable with chmod u+x. The remote_host has been defined in my .ssh/config as follows: Host remote_host HostName ...
Marlo's user avatar
  • 105
0 votes
0 answers
194 views

Remote access to `/dev/input` fails with permission error

I need to open a USB game controller device (joystick) remotely. This device is physically connected to server and is available for local user with permissions: crw-rw-r--+ 1 root input 13, 0 ** /dev/...
zlg's user avatar
  • 1
1 vote
1 answer
5k views

Apache Guacamole Login with User from DomainA, rdp to Server from DomainB

Overview We log into Gucamole with a User from DomainA where we select a rdp-connection to a server from DomainB. Trusts DomainA to DomainB and vice versa: Type: External Kerberos AES Encryption ...
Manu's user avatar
  • 854
0 votes
1 answer
90 views

Access POP3 content from other computer

I have a tough mission, that I have no idea how to accompish it. In our company, all the e-mail accounts are configured as IMAP accounts, therefore we can access the e-mail from wherever. However, ...
questionador's user avatar
1 vote
2 answers
1k views

Can I use always on VPN device tunnel on Windows 10 Pro

I am testing out always on VPN user and device tunnels in my home lab to evaluate for live deployment in our companies' environemnt. My user tunnel is working flawlessly, but my device tunnel does not ...
James Edmonds's user avatar
0 votes
1 answer
597 views

Cant Remote mongodb using public IP ubuntu 18.04 , GCP

I created a virtual machine ubuntu18.04 and install mongodb using sudo apt install -y mongodb then uncomment PORT in .conf then change 127.0.0.1 to 0.0.0.0 then restart mongodb then when i try to ...
Corioste's user avatar
1 vote
0 answers
265 views

Traffic won't go through Remote Router

I am currently trying to deploy a Server which is supposed to connect via a deman-dial in connection to a different companies network. The demand dial in connection has been set up on Windows Routing ...
CodingWolf's user avatar
1 vote
0 answers
44 views

Is it possible to configure a machine wide WinRM client default authentication?

WinRM is the protocol used by Windows Machine when running remote commands, WinRM supports several authentication schemes. Is there a machine wide setting to control the default authentication ...
Chedy2149's user avatar
  • 223
1 vote
0 answers
654 views

RDP connection allows any domain name as long as user is correct

I'm hoping someone can provide some ideas about this. I've got a couple of virtual Windows servers set up on Server 2016 and Server 2019. They are DCs and also RDS servers to run remote apps. I'm ...
BRASK0's user avatar
  • 43
2 votes
1 answer
3k views

SFTP user creation in Windows OpenSSH

We have installed an SFTP server as per https://winscp.net/eng/docs/guide_windows_openssh_server Now we are able to connect via WinSCP and FileZilla. But by default, account login to SFTP is Windows ...
Mavuni m's user avatar
0 votes
1 answer
2k views

How to remote access Virtualbox on a headless linux server

This is not a real question but I rather want to put this here in order to document it as there is a lot of contradicting information in the web. When you run Virtualbox on a headless linux server, ...
onemarcfifty's user avatar
0 votes
0 answers
559 views

Allow MongoDB remote access only for specific IP

I bind with my VPS public IP address. I figurate with help of my mistake that my localhost apps connect with success with my remote server. Allow MongoDB remote access only for specific IP? Any ...
Nikola Lukic's user avatar
-1 votes
1 answer
718 views

x2go aborts while starting

I am connecting to a server xfce with the x2go Client, I am on Mac OSX, the session is aborted with: Error: Aborting session with 'Unable to open display 'nx/nx,options=/tmp/.x2go-user/C-user-173-...
simona's user avatar
  • 109
2 votes
3 answers
6k views

HP Proliant DL80 Gen9 cannot connect to iLO

I have a second hand HP Proliant DL80 Gen9 server that was purchased without any instructions or passwords details, I'm trying to connect to ILO so I can install Windows etc using a USB as I do not ...
Maya's user avatar
  • 123
0 votes
1 answer
4k views

HP Proliant DL380 Gen9 iLO connectivity

I'm trying to install windows on a recently purchased (used) HP Proliant DL380 Gen9 server but I do not have a monitor to connect to the server to guide the installation. The only way to do it is ...
Maya's user avatar
  • 123
5 votes
3 answers
6k views

Connect to remote minikube cluster using kubectl

I am looking to see if I can connect to a remote minikube cluster (Ubuntu box) using local (Mac) kubectl. I currently use Docker and can do this very easily using docker-machine. Simply eval to the ...
MeanwhileInHell's user avatar
1 vote
1 answer
544 views

AutoSSH through Firewall - Best practice for many devices on network?

My team is trying to find a solution to remotely access and update multiple Linux devices behind a firewall at several locations with their own firewalls. Traditionally, we would visit the business' ...
QNeville's user avatar

1
2 3 4 5
22