-5
votes
1answer
35 views

How to route to next server? [closed]

I must route all traffic from first server to second server and next to third server. Like this: server1 -> server2 -> server3 I use Debian Wheezy. Can anyone tell how to do this with iproute?
0
votes
0answers
33 views

Glusterfs : 'No route to host' for fstab mount in CentOS

I am using glusterfs, and am using fstab in this way: <IPADDRESS>:/<VOLUMENAME> /some/mount/point glusterfs defaults,_netdev 0 0 but the logs for the mount continue to say the following. ...
3
votes
2answers
145 views

Linux adds the wrong default route

For some reason my Centos 5.9 Linux 2.6.18 x86_64 wants me to have two default routes. Whenever I reboot the server, my routing table looks like this: [root@server1 ~]# route -n Kernel IP routing ...
2
votes
1answer
86 views

Linux IP forwarding trouble

In my environment most of the servers have 2 network cards. A primary/user network card used by the application, and a secondary/backup adapter used for backups, bulk copies etc. I just set up a ...
0
votes
1answer
78 views

Force all traffic from servers on the same bridge to pass through router interface

I have a bridge with all hosts from the 192.168.5.0/24 network connected to it.They all connect to this bridge via a secondary interface eth1. I have a router which connects this bridge to others on ...
1
vote
0answers
148 views

XenServer IP Failover OVH not working

I have got problem on XenServer with IP FailOver in OVH. I did everything what is in this official tutorial http://help.ovh.co.uk/BridgeClient and IP not working. On my VM is Debian 7 64bit I set MAC ...
1
vote
1answer
210 views

Unable to add a static route: SIOADDRT: Network is unreachable

I've been bashing my head against a wall for a few days trying to figure this out: My ifconfig is: eth0 Link encap:Ethernet HWaddr 00:50:56:BB:XX:XX inet addr:192.168.36.132 ...
0
votes
1answer
43 views

how to completely quit openvpn, make network work normal

I use a openvpn config file connect to a vpnserver successfully. But after I ctrl + C quit openvpn, ubuntu counld not access network. I think the route table is wrong or openvpn is not shutdown ...
2
votes
2answers
77 views

linux caches route with IPs of machine it has no access to

I have a VPN with a gateway, and an application server. The app server only knows about the gateway of the VPN. The gateway of the VPN knows about the gateway of the physical network the vms are ...
0
votes
3answers
136 views

Centos multiple NICs routing issue

I am having trouble setting up permenant routes for my network interfaces, below my config : ETH0 : 172.23.137.27 Netmask /25 - 255.255.255.128 Gateway – 192.168.126.126 ETH1 : Trunk VLAN - ...
2
votes
1answer
108 views

How to View the IP routing table

How can I see ip routes I've added with ip route add default via x.x.x.55 table test1 for example I added 199 test1 and 198 test2 and 197 test3 to /etc/iproute2/rt_tables then I run: ip route add ...
0
votes
3answers
170 views

CentOS masqueraded network with iptables clients not connecting: Unable to ping

I'm a novice sysadmin working on a system with a CentOS server masquerading traffic with client machines also running CentOS. Something with the tables got messed up and my clients no longer have ...
1
vote
1answer
65 views

Routing between many systems, no first hop

I have a main router (10.20.0.1 (lan), 10.20.201.1 (vpn server)) connected to 5 other GW via VPN. Every gateway can ping every other one, and the PC behind them. One of my router, 10.20.6.1 (lan), ...
-3
votes
1answer
226 views

Why is Windows 7 not following all routes? [closed]

My computer is connected to my secondary router that's running the 192.168.42.0/24 network and my computer also has a route that directs anything on that network to the router, but for anything on ...
0
votes
2answers
1k views

Routing traffic to a specific NIC in Windows

I added a 10GB NIC to a SQL server which is connected over to a backend storage using ISCSI. I would like to force traffic going to a certain IP address/host to use the 10gb NIC, while all other ...
2
votes
3answers
311 views

Multiples ip address on interface. I want to specify one of them for output

I ran curl on curlmyip.com, and I got the wrong output ip address. My systemd service file is: [Unit] Description=Wired Networking Wants=network.target dibbler-client.service Before=network.target ...
2
votes
2answers
483 views

How can I define null route on Windows Server 2008 R2 Standard

How can I define null route on Windows Server 2008 R2 Standard? I've tried x.x.x.x is target ip which I'm trying to block 1.1.1.1 is non existing ip 192.168.1.1 is default gw 192.168.1.254 is non ...
0
votes
1answer
131 views

Enable route between subnet

I have a Centos server with three NIC cards. ETH0 Public IP xx.xx.xx.xx1/xx.xx.xx.xx2 (with two public IP) EHT1 Local Subnet 192.168.80.0 (DHCP server listening on this interface) ETH2 Local ...
-1
votes
1answer
168 views

Centos 6.4 2 NIC same gateway

I'm having a problem with my centos server setup, i have 2 public nic and they have the ip from 209.59.252.0/24, with the same gateway. The problem is that only eth0 works, the other one doesn't. They ...
1
vote
3answers
1k views

How to check a route exist between two hosts for a particular port?

How to check whether there is a route between two hosts for a particular port (e.g. 1433).
0
votes
0answers
43 views

Trying to communicate between virtual servers on the same host through ipv6

I am running KVM on a host with 2 virtual servers. Each virtual server has a own bridge interface on the host VPS1 has br1 VPS2 has br2 Each virtual server has a own ipv4 and a ipv6. The virtual ...
2
votes
2answers
384 views

What is the difference between “route” and “ip route”?

I tried to understand the networking tools on linux. I am confused now about what should I use to manipulate the static routing: "route" or "ip route"?: route - show / manipulate the IP routing table ...
0
votes
2answers
217 views

With split openvpn network, unable to connect to remote server via vpn

I am running ubuntu 12.04 and only want the vpn for specific applications that can bind to vpn port(address). If I connect to the VPN with all the traffic routed through the VPN port everything works ...
1
vote
2answers
249 views

How to make incoming and outgoing IP same on a multiple IP binding server

I have a centos 6 VPS configured 1 network interface binding with 4 IPs, for example 172.x.x.11, 172.x.x.12, 172.x.x.13, 172.x.x.14 binding with venet0:0, venet0:1, venet0:2, venet0:3. I have pptpd ...
1
vote
3answers
322 views

How to set which IP to use for a HTTP request?

This is probably a silly question. I'm doing some http requests using wget from the command line, and I want those connections to be made through one specific IP of the 4 IPs my server has. Those http ...
0
votes
1answer
259 views

Using iptables to forward traffic to a single IP address

The setup: Debian; acting as the network's router using iptables, fail2ban Because of external requirements, both networks are 192.168.1.x. eth0: 192.168.1.1 eth1: 192.168.1.2 Ubuntu (192.168.1.3) ...
0
votes
1answer
60 views

Giving Multiple ip address of same n/w on two virtual nic

running xen with 2 guests i have been trying to assign public ip addresses to two virtual nic, one each which is sharing bridge networking with host. tried this Host x.x.116.2 created two nic ...
2
votes
2answers
549 views

Can't reach network 192.168.100.0/24

In one of our data-centre we've a Debian machine acting as a router. From this network we cannot reach any of the machines found on 192.168.100.0/24 network. E.g The gateway on the 192.168.100.0/24 ...
0
votes
2answers
62 views

Linux Servers in same network unreachable from each other, but however reachable from outside

I have 5 servers in the same network with IPS X.X.X.110 - 114. They are all connected to a switch. I am able to reach all 5 of them from outside(internet). However, I cant connect from servers 0 - ...
0
votes
1answer
311 views

Multiple interfaces: route packets to specific interface

I have 2 internet connections on my network. My router is running Debian. eth0 is my network (192.168.0.0/16). eth1 and eth2 are connected to 2 different internet providers (with dynamic IP). Here is ...
0
votes
1answer
192 views

MPLS link not forwarding

We have a new MPLS service and I'm having trouble getting it to work (it seems like a routing issue). It's a T3 with two circuits: a public wan port and a private MPLS circuit connecting 2 sites. ...
3
votes
2answers
147 views

How to add vpn subnet to a private local subnet (both in different subnet address)?

I set up a xl2tpd vpn server on a router, and assigned the ip range from 192.168.191.2 to 192.168.191.244, and there's local network behind the router's lan side with a 192.168.1.0/24 ip range, so I ...
1
vote
2answers
422 views

no route to default gateway

I just lost about all my hair on this one: I got an ubuntu 12.04 machine on ip address 192.168.0.100, gateway 192.168.0.1 A router on 192.168.0.1, running a forwarding dns ping 192.168.0.1 - or ...
1
vote
2answers
249 views

how're routing tables populated?

i've been reading "tcp/ip illustrated" and i started reading about ip forwarding. all about how you can receive a datagram and work out where to send it next based on the desination ip and your ...
1
vote
0answers
73 views

WAN Woes Between Satellite Offices

Having a baffling time trying to troubleshoot an issue between 3 sites on a WAN set up via site-to-site VPN. The sites are: NY: 10.30.1.0 (HQ) OH: 10.30.6.0 CT: 10.30.7.0 When I first ...
3
votes
1answer
656 views

Set source address to use tun device does not work (Debian Squeeze)

There have been similar questions on StackExchange but none of the answers helped me, so I'll try a question of my own. I have a VPN connection via OpenVPN. By default, all traffic is redirected ...
3
votes
1answer
505 views

Wget works, Ping doesn't

There are some anomalies on a Virtuozzo virtualized Debian 4 (I know, I'm gonna upgrade this one asap, but there dependences). We run some Websites on this one. And a view Days ago exmi4 wasnt able to ...
2
votes
1answer
883 views

IP Bridge for KVM with multiple subnets

I have a machine set up running KVM and a bridge on eth0 with the ip address for the machine. The machine has an IP address in a range with no more ip adresses free. I am trying to make a second ...
0
votes
1answer
49 views

Does the following route change include undesired machine?

I want to utilize both the wired lan from the company and the wireless from my phone( achieved by PdaNet ). I need to seperate the connections in the route table because the wireless connection have ...
0
votes
2answers
329 views

connecting to a network using route command

I have a computer with an external IP(192.168.223.220) and also an internal address (10.1.1.20) in order to connect to some servers that don't have external addresses only 10.1.1.xx . in order to ...
1
vote
2answers
307 views

Can't route specific subnet thru VPN in ubuntu

I'm having issues routing traffic thru VPN. Here's my setup I have 3 hosts, let's call them A, B and Z B and Z have a VPN connection in the 10.10.10.x SUBNET A and B have a direct connection in the ...
0
votes
0answers
859 views

Can't ping Ip over bridge

I'm unable to ping another host over a bridge I created, I can't see the error -.- It's a remote machine running debian stable with some backports for which I want to set up DHCP on the new Subnet ...
0
votes
2answers
56 views

4 nodes to the internet, everything works except 3rd node

I have 4 nodes to the internet: Internet <--> Node A <--> Node B <--> Node C <--> Node D Node A: main gateway, manage internet Node B: gateway/tunnel to node C Node C: ...
2
votes
3answers
99 views

what's the difference between ICMP prohibited ICMP unreachable?

If I want to forbid a route to response a network, should I use ip route add unreachable 209.10.26.51 or ip route add prohibit 209.10.26.51?
0
votes
1answer
663 views

Windows 7 + IPSec: Force all remote traffic through VPN

I have set up a VPN connection to an remote L2TP/IPSec VPN server, which works fine. Now i like to ensure that all remote traffic is being routed through this VPN, so if the VPN connection drops, no ...
1
vote
2answers
190 views

removing static route from linux doesn't disconnect session

I want to test "connection retry" with remote application server. For this, I am using route method, wherein I remove static route from my linux server and check if the connectivity goes down or not. ...
0
votes
1answer
2k views

Static route issue on Windows Server 2008 R2

There's a virtual machine with Windows Server 2008 R2 installed. There are two NICs connected to it: PROD & BUP. The BUP interface is configured without default gateway. After adding static route ...
1
vote
2answers
339 views

How do you find current internet network interface?

How do I find the network interface that's connected to the Internet? This machine could typically be connected via {eth0,eth1,usb0,wlan0}. The best I could think of is: sudo route | grep default | ...
0
votes
1answer
187 views

Manage the Win2008 routing table

I have a networking issue As I have now two network cards and each one should connect to a specific network; one should be used to connect to the internet and the other one for intranet. I want to ...
1
vote
2answers
163 views

Network configuration

please see the network map from http://i.stack.imgur.com/HqT7h.jpg I want to connect to network3 from network1 but i want to connect by network2! I have a PC which has Ubuntu 11.04 and it can ...