First of all sorry for my English: I have two switch with 2 separates vlans connected. The first Vlan in the range 192.168.26.x gateway: 192.168.26.254 The second Vlan in the range 192.168.50.x ...
I am having trouble setting up permenant routes for my network interfaces, below my config : ETH0 : 172.23.137.27 Netmask /25 - 255.255.255.128 Gateway – 192.168.126.126 ETH1 : Trunk VLAN - ...
I have a WRT610n running DDWRT v24-sp2. My goal is to setup: Single connection from switch to WRT610n, and switch passes tagged VLAN 50/40 and 1 (untagged) On WRT610n the 3 LAN ports (eth1/2/3) and ...
I'm trying to configure a host in a way that the traffic is routed either via eth0 or vlan123@eth0, depending on the source address used. Both interfaces have access to the whole network and both have ...
I have a layer 3 switch which needs to route traffic to 2 different networks which don't see each other. What would be the simplest and most efficient way to do this? And is there any straight ...
I have a two interface Linux iptables firewall. Currently I have several servers behind it on a private network 192.168.0.x. The firewall currently has each IP configured locally and uses NAT to ...