2
votes
0answers
16 views

Non-local IP for next hop in routing

I'm working with an MPLS network and I am slightly confused about some route entries. Interfaces are (these are fake IPs): eth0 10.10.10.1 (LAN) eth1 10.9.9.1 (MPLS) eht2 2.2.2.2 ...
4
votes
2answers
484 views

Will blocking port 25 on a router cripple outlook clients?

I work at a small ISP, we manage about 60 buildings with p2p radios and a main cisco router at a central location. Recently we were notified that a phishing domain is associated with one of our IPs. ...
-4
votes
2answers
21 views

How to get forwarded with ssh [closed]

Let's say I, I know somebody's host IP-Address and the IP-Address of some lxc-container which is running on this system. When I only have the password for the user of this lxc-container and not the ...
0
votes
1answer
83 views

Is this a botnet? [closed]

I manage networking equipment at a small ISP for 60 highrise buildings. Each building has anywhere from 1 to 60 24 port switches, or some DSLAMs, or some coax gateways, with p2p radios on the roof, ...
0
votes
0answers
16 views

Static Route Dual LAN CARD Centos 6

First let me explain the scenario. I have two internet connection (Lease LINE and BroadBand). I have a CENTOS 6 Server which is used for VOIP calling (GOAUTODIAL). Now I want everyone in the LAN to ...
1
vote
0answers
43 views

Load Balancing over multiple ISP connections

I have been trying to implement load balance and fail over on a linux machine having multiple interfaces. Currently I am using two ISP lines and I wish to split the network traffic such that both of ...
0
votes
0answers
11 views

Dynamic Routes at Home Router [migrated]

I am currently using a linux box as my home router (PPPoE to my ISP and NAT, etc). Some websites are blocked in my country (don't say the name out loud), so I have another PPP in my router to a VPN ...
1
vote
1answer
42 views

How can I host multiple websites from the same Windows 2008R2 server?

server running Windows Server 2008 R2 with two NICs and running IIS two Internet connections we can only get one IP address on each Internet connection. two routers we want to serve two websites, ...
1
vote
1answer
26 views

Upgrade network Class vs Virtualized LAN

We operate on one class C network, let's say 192.168.1.0/24 But the problem is we have 262 devices! I propose upgrading the network to a class B. The opposition proposes purchasing new hardware and ...
0
votes
1answer
39 views

Network Route Test for DHCP

Is it possible to get a remote client to send a DHCP-style request to a server (which you're on) to test the network routes are open? I can check from server to client, but different ports are used on ...
2
votes
1answer
29 views

VLAN routing query on HP Switch

I have Layer 3 HP switches throughout my organisation. They are set up to perform routing between all the VLANs connected to them, and everything is working. I am pretty proficient with using them, ...
0
votes
0answers
33 views

OpenVPN network topology

I'm part of a very small startup and as such I have little money for infrastructure, etc. I need to roll out a OpenVPN service so some employees can VPN in while on-site. To give an indication of ...
1
vote
2answers
50 views

Allow only IPSEC outgoing traffic to a port (using IPTABLE?)

Problem: I've a situation where IPSEC server and the target server (Say http server) happens to be the same machine and I need allow ONLY the traffic coming through IPSEC server to have access to a ...
-3
votes
1answer
32 views

What happens if all the ports of router(doing NAT) are occupied ? [closed]

Suppose n computer are connected to a router R .It is doing NAT but suddenly all of its ports are occupied .So when a new computer N tries to connect what would router do means it simple do not ...
1
vote
1answer
85 views

How to configure routing between Azure virtual networks?

I'm designing an Azure environment which will contain multiple virtual networks, and a requirement is for all networks to be connected; a VM in any network should be able to talk to another VM in any ...
0
votes
0answers
45 views

Meaning of “scope link” when adding default route via different subnet

I've noticed different behavior when using or not using "0.0.0.0" as the gateway for host routes (and trying to understand that). I'm using CentOS 6.5 and attempt to add a default route via a host ...
1
vote
1answer
59 views

VM with 2 network cards

I have a VM with 2 network interfaces which is running CentOS. One connects to a private network (192.168.6.x) and another to our company wide network. When I try to ssh the private address from a ...
2
votes
0answers
73 views

How to setup multiple OpenVPN connections on a server for a single localhost app to use on CentOS 6.5?

I have a scenario where I need to run several OpenVPN connections at one time and to allow a singular application to access each of these connections. How wold I go about starting up several ...
2
votes
1answer
117 views

Multiple network interfaces, routing configuration. IP rule fails (debian based instances)

I have debian wheezy based instance with 2 network interfaces (Primary, Secondary). My setup flow: vim /etc/network/interfaces auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet dhcp ifup ...
0
votes
1answer
46 views

load balancing multiple connections over multiple links

As I understand it (based on the kernel docs) the setting of "arp_filter=1" necessitates the use of a source based routing policy to allow multiple interfaces to route traffic, potentially (but not ...
0
votes
1answer
48 views

Same routes under VPN - how to workaround?

I only have basic experience with VPNs (mostly OpenVPN) and mostly theoric, but now I want to set up something more complex and I am evaluating the possible issues that I may face. I will try to ...
4
votes
1answer
95 views

Massive packet duplication

Short Version: We've had a problem with a particular server receiving massive duplicates of packets. After much fault finding we found the problem was caused by a switch sending my packet out every ...
0
votes
0answers
35 views

network inbound from other subnets refused to server A, Server A can go outbound to internal networks, but not internet

I have a RHEL 6 server with 4 NICs on 192.168.2.[30-33]/24 Set with DHCP reservations via infoblox, I have checked and the MACs all match up. ifconfig shows /24 for every netmask, and the routing ...
5
votes
1answer
499 views

Internet routing table breaks 512,000 routes [closed]

Looks like with all the mass IP grabs as well as subletting of space, things have finally hit the 512K mark. Anyone on the raw end of an upstream router that ran out of route space? How do most ...
2
votes
1answer
93 views

Windows ignores which interface to use in routing table

Hi i'm running windows 7 and i have 2 network cards, one wireless with internet connection and one wired with local lan connection. I want to use both at the same time so i set the lan card to 1st ...
0
votes
0answers
70 views

Windows 2008 / 2003 DC can not ping gateway or internet

Im doing some tests trying to setup a domain and i found a very weird behavior. Same thing on windows 2008 r2 and windows 2003 x64 r2. I am running on KVM over proxmox virtualized with virtio. After ...
0
votes
1answer
87 views

Linux Unraid route traffic through different interfaces

I have two interfaces: eth0 and tun5. eth0 is an ethernet to a router and tun5 is a VPN tunnel. These are on an UnRaid server, which is based on Linux. It's a headless server so I access it via SSH. ...
0
votes
0answers
58 views

Ubuntu refuses to route packets for public subnet through linknet

I've run into the novel concept of routing through a linknet from my new ISP, and am currently trying to get a /28 routed properly on my Ubuntu 13.10 server. However, this is proving futile. This is ...
0
votes
0answers
59 views

HTTP not redirecting to HTTPS, Router or Firewall Issue?

I manage an application server in a different department from IT and since they implemented a new firewall as part of emergency maintenance, users are having issues accessing the web app(Blackboard). ...
1
vote
0answers
46 views

trying to reach a port forwarded server from the subnet using the public IP not working

I set up a server which is connected to my router. The router forwards a port of my server. So when I scan that port using http://www.t1shopper.com/tools/port-scan/ I got: 188.143.126.14 is ...
0
votes
2answers
198 views

IPv6: “Destination unreachable: No route” Routing error?

I've got an IPv6 address added to a bridge (sysctl has been configured to enable forwarding). However whenever I try to ping an IPv6 host it fails with the following error: PING ...
0
votes
0answers
94 views

xen routed networking maximum segment size

For a few days now we experience issues with xen in routed networking mode regarding the MTU and MSS values (xen 4.1, debian wheezy, ISP is Hetzner) (network-script 'network-route netdev=eth0') ...
0
votes
1answer
29 views

windows route not followed

I add a route on the windows network like so: route -p add 46.137.226.16 mask 255.255.255.255 10.20.1.1 The goal is for traffic to 46.137.226.16 to be routed via the VPN/remote gateway on ...
4
votes
4answers
211 views

Monitor an internet link to a remote host

I have a Debian Wheezy server running Xivo (let's call it A), this server has 2 interfaces: eth0 and eth1 . There is no default gateway and only a few servers are statically reached from A. eth0 has ...
0
votes
1answer
96 views

Is it possible to make the server accessible from two internet connections

how to make this: have: Centos 6.5 WAN1 eth0 44.44.44.44 (DEFROUTE=yes) WAN2 ppp0 95.95.95.95 (DEFROUTE=no) HTTP server work and available only in eth0 DNS server work but port 53 blocked in ...
0
votes
0answers
89 views

Linux routing: How to allow a device inside private network to connect a public IP over an unknown network?

Consider following network topology: ---------- ---- (my network) ---- | Device 1 | (.101) | 192.168.191.0/24 | ---------- | | ...
1
vote
2answers
41 views

Can a cisco router execute a command itself?

I'm experiencing a problem with my Cisco router 1900 Series, the router sometimes stop routing packets, and when i log into it and show the running-config i see no ip routing executing ip routing ...
0
votes
2answers
539 views

Windows Route traffic to specific IP through secondary nic

Being reading about this on ServerFault but decided to open a new question, as I can't re-ask over existing threads. 2 computers, 2 nics: Computer A - 100.100.100.10 - 192.168.100.10 Computer B - ...
0
votes
1answer
162 views

Access to a network server without port forwarding

I have a network with the following structure. The server in PC2 is simple socket server TCP in 8080 port. I need to access to PC2 from other external network by socket client. This socket client ...
0
votes
0answers
40 views

need to exclude a static route from being redistributed into eigrp

I have some asymmetric routing and need to point a public IP back through my network. We are redistributing static into EIGRP. Does anyone know how to exclude a certain static route from being ...
-1
votes
3answers
160 views

What happen when I assign 2 IP on one NIC? [closed]

What happen when I assign 2 IP on one NIC? e.g. I have one physical NIC (eth0) and I assign on this interface 2 IPs from different network. e.g. auto eth0 iface eth0 inet static address ...
0
votes
3answers
70 views

Adding internal A-record to a second level domain [duplicate]

Just a though- if I add my internal IP address to A-record to a second level domain.com (assuming that I can't add it internally using AD/DNS) Will it work in my internal network? Theoretically, any ...
0
votes
0answers
69 views

How to add a route for a specific subnet?

I have a Linux computer and an eth0 interface with 2 IPs: ip : 10.10.1.1 mask : 255.128.0.0 gw : 0.0.0.0 ip : 10.22.32.1 mask : 255.255.255.0 gw : 10.22.32.254 I would like to add a specific ...
0
votes
1answer
83 views

Network packets flowing both ways but still can't communicate

I have a linux box with two NICS: eth0 192.168.11.14 eth1 192.168.12.14 My routing table is as follows: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref ...
2
votes
3answers
808 views

Setting up gateway on different subnet than IP address

My provider has a (stupid) setup where the IP address for the gateway is on a totally different IP range than the assigned IP address. They insist on doing this for whatever reason. I'm trying to get ...
6
votes
3answers
736 views

DNS servers already use anycast. Will adding more IPs enhance scalability?

RFC 1034 requires us to assign at least two IP addresses for DNS servers. However, redundancy can already be achieved by a single IP address if we use anycast addressing. BGP anycast seems to scale ...
0
votes
3answers
1k views

Routing between two subnets using a Linux box with two NICs

I have a Linux box with two NICs, each connected to a different LAN: Network A: 192.168.1.0 255.255.255.0 Network B: 192.168.2.0 255.255.255.0 The routers are: 192.168.1.1 192.168.2.1 Linux NICs are ...
0
votes
1answer
247 views

Block ip forwarding for specific remote ip address

I use ubuntu as gateway for several hosts. I need advise how to block ip forwarding for specific ip address or specific ip range? I tried to block ip via ufw deny rules, but it looks like ip ...
1
vote
1answer
96 views

One router and one modem+router. Can I pass a static IP range from one to the other?

I had been running a Huawei HG612 connected to a DD-WRT router for internet services using PPPoE as authentication. Due to an office move, I need to have a DG834 modem+router which will be used for ...
2
votes
1answer
1k views

Yum fails with [Errno 4] IOError: <urlopen error (111, 'Connection refused')> but TCP traceroute works

When I try to connect to yum repos using either yum info or yum install I get the error: [Errno 4] IOError: <urlopen error (111, 'Connection refused')> I first thought our Firewall may be to ...