-1
votes
0answers
16 views

OpenSwan VPN pings but other traffic fails

I'm setting up a VPN server using OpenSwan, to establish site to site VPN. Site A has the OpenSwan server, sitting behind the SOHO router (ports 500 and 4500 forwarded and default route to subnet B ...
-1
votes
0answers
28 views

Route public subnet to client over openVPN

I want to route a public /29 subnet over vpn to a client with a natted ipv4. After doing some research, I can't figure out to make that work. Maybe I was searching for the wrong terms, but it seems ...
0
votes
0answers
25 views

openvpn server for mobile access routing/bridging

I'm running a web server on an IPC and want to get access to the network with VPN, because the customer doesn't want to host his data directly on the internet. This web server runs a webapp, which ...
0
votes
0answers
31 views

Add routes for VPN on CentOS

I am a completely new in server routing and VPN. I have a CentOS 6 server with 2 interfaces running (eth0, eth1) and current routes like this # route Kernel IP routing table Destination Gateway ...
1
vote
0answers
20 views

Route between two branch offices via IPsec VPN to head office?

I have TMG 2010 running on Server 2008 R2 in our head office with 2 branch offices connecting in using Dray Tek 2930 routers with IPsec site to site VPNS. The remote sites can route between the head ...
2
votes
1answer
22 views

Hopping a VPN Tunnel

My central office and remote offices are connected to each other over site to site ipsec vpn. We use Fortigate firewalls and everything is working fine. On the other hand, only central office is also ...
0
votes
0answers
61 views

Pfsense PPTP VPN Error 806

I was previously using another firewall software and simply by port forwarding port 1723 from the ADSL interface to a Windows Server attached to the LAN, we were able to VPN in. Since switching to ...
2
votes
1answer
95 views

Redirect all traffic sent to an unallocated alias IP within a VPN subnet, to a fixed IP within another VPN

I have a server hosting multiple bridged (i.e. tap) VPNs using openvpn, where each VPN has a different 10.8.X.0/24 subnet. I wish to redirect traffic sent to a specific, unallocated IP address (e.g. ...
0
votes
0answers
37 views

OpenVPN Server & Two Gateways

I have a network setup as follows: Internet <---> Firewall <---> VPN (1) VPN <---> NAT (2) Internet <---> Firewall <---> NAT (3) (I don't have the reputation to post the picture :/) ...
3
votes
1answer
94 views

Windows server 2012 ignores static routing

BIG UPDATE: I was blind I see now that route 172.17.50.1 has netmask 255.255.255.255 and so it point to single host! But now I cannot understand how can I ping 172.17.50.10 because there is not route ...
0
votes
1answer
134 views

Route IP to OpenVPN client

I have to external IPv4-IPs at my VPS. I want to route one to a VPN client, OpenVPN (tun). Only one VPN-Client should use the VPN, and I want to route all traffic to my second external IP to this VPN ...
0
votes
0answers
78 views

Routing through SonicWALL SSL-VPN and Cisco L3 Switch

In the image above, we use the SonicWALL NSA 3500 at our gateway and handle VPN with its SSL-VPN. Our Layer 3 Cisco switch is our core network switch and handles about a dozen VLANs. Most VLANs ...
0
votes
1answer
323 views

How to route traffic over an active VPN tunnel by domain name?

I set up a VPN tunnel to my web server targetting its FQDN: (e.g. my.server.com) using the built-in Windows 7 VPN feature and the built-in Windows 8 Routing and Remote Access (RRAS) VPN feature. How ...
0
votes
0answers
87 views

VPN client names incorrectly resolve to their private LAN IP addresses, DNS Issue?

My office network is running a single Windows Server 2012 Standard as Domain Controller, DHCP, DNS, NPS, and RRAS. DHCP has a scope of 192.168.1.50 through .200, and RAS is configured to get IP ...
2
votes
1answer
42 views

Should we accomodate a customer asking us to NAT servers behind new PUBLIC IPs within a VPN?

We're a SaaS provider, setting up a IPSec VPN between our data center and a customer's site so they can directly access their hosted database server from their LAN. Instead of exposing our internal ...
1
vote
0answers
40 views

VPN, routing and bridging two networks together

I have a site which I can VPN into via a Cisco RV082 10/100 8 Port VPN router. The IP address subnet on the LAN is 192.168.3.0. One Windows machine on this network contains two network cards which ...
0
votes
0answers
134 views

Multiple VPN connections on the same Computer at the same Time with the same Subnets

What's the best approach for such scenario? : One machine „GATEWAY” SERVER with configured multiple VPN connections. PC1, PC2, PC3, PC4 are the clients that with the same time wants to connect to ...
1
vote
2answers
2k views

Setting up a VPN connection to Amazon VPC - routing

I am having some real issues setting up a VPN between out office and AWS VPC. The "tunnels" appear to be up, however I don't know if they are configured correctly. The device I am using is a Netgear ...
1
vote
1answer
655 views

Tunneling traffic from eth0 to tun0 (OpenVPN) Ububtu 12.04

Following the steps described here I've managed to configure both the VPN server and client(I can ping both ways). Their respective configuration files are: server: ;local a.b.c.d port 1194 ;proto ...
0
votes
0answers
96 views

redirect http traffic through ppp0(vpn tunnel)

So I have this tunnel connection with a VPN on interface ppp0, I need to redirect the traffic through that vpn, of course if I do route add default dev ppp0 it will redirect all the traffic through ...
0
votes
1answer
170 views

How to route traffic only to specific hosts using sshuttle?

I'm currently using sshuttle to access some VPN-restricted resources, the vanilla version of "route everything" works fine but I'd like to know how to use it to route only traffic to those servers. I ...
0
votes
0answers
202 views

Fortigate VPN can't reach site

I've two Fortigate's here and I use one of them for each site. Site A Site B 192.168.2.0/24 <---------- VPN ...
1
vote
1answer
41 views

routing instead of VPN

I have a browser-based application deployed on an intranet server at a client's office. They have Wyse thin clients and have recently added Surface tablets for office use. 90% of the time, the users ...
0
votes
1answer
186 views

How to forward traffic to VPN device

I have set-up OpenWRT in a virtual machine which acts as a router. It has two network interfaces: br-lan: connected to vm internal network eth1: connected to internet through host via NAT I have ...
0
votes
1answer
39 views

Can I assign a virtual interface (VPN) to a 'real' interface / NIC of my choice?

I have a small server , running MINT linux with two NICS (eth0 and eth1) and I'd like to setup the MintBox as a VPN client to connect to a web-hosted VPN server. All works wonderfully on the VPN ...
0
votes
1answer
73 views

OpenVPN not redirecting

I've tried to follow the official documentation, but I can't seem to get it to work. In my /etc/openvpn/server.conf I have push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" set and I ...
1
vote
1answer
121 views

Debug: Cisco VPN Router runs 100% CPU

I've turned logging on and all I am currently getting are Debug/Kernel logs. Nothing above debug. This was also during offsite hours when hardly any traffic was going on. I have also upgraded to the ...
0
votes
0answers
35 views

simple subnetting, regarding vpn

i am using 2 cisco rv180 to build up a ipsec tunnel. thats working. but i cant get any packets trough the tunnel. first i was using: local: 10.0.0.X 255.0.0.0 remote 10.0.1.x 255.0.0.0 but 0 ...
0
votes
0answers
222 views

Using OpenVPN only for specific applications on Linux

I have a working PPTP VPN with very specific routing requirements that I need to replace with OpenVPN due to issues with our ISP, and I am having issues adapting my routing rules to OpenVPN. I only ...
2
votes
1answer
940 views

Fortigate VPN Routing issue

I have 200B Fortigate unit with 2 internet WAN connections. I also have a remote site which I'm connected to via IPSEC VPN through WAN1. This site has only one GW IP address. I'd also like to setup a ...
0
votes
0answers
151 views

Multiple virtual interfaces with multiple openvpn interfaces

I currently have 4 interfaces with static IP addresses from the local network; eth0:0 eth0:1 eth0:2 eth0:3 I also have 4 OpenVPN TUN interfaces which are connected to various servers around the ...
1
vote
1answer
54 views

Understanding VPN Implementation

The above image shows what I think occurs during an OpenVPN connection. Hosts A and B are connected to the VPN through the VPN server at 1.2.3.4:1194. My question is: if host A wishes to send a ...
0
votes
1answer
31 views

Routing public IPs (each a /32) through a VPN to another server

Hopefully the title makes sense; I have a server currently in a colo facility, with many IP addresses routed to it. They are individual IPs and not in a contiguous block. Due to vastly improved ...
0
votes
0answers
29 views

openVPN as a way to connect to a LAN by another client, different from server

Setup: one LAN handled by a router without a publicly available IP address but without any outbound connection restrictions ("target LAN"); a separate server publicly reachable from the Internet ...
0
votes
1answer
92 views

Setting up a server that routes local traffic through vpn, while still being able to access internet directly

The goal is to setup a local server that routes local traffic through an uncontrolled remote vpn service while still being able to access the internet directly (not tunneled via vpn) and provide ...
2
votes
1answer
206 views

route http and ssh traffic normally, everything else via vpn tunnel

I've read quite a bit and am close, I feel, and I'm pulling my hair out ... please help! I have an OpenVPN cliend whose server sets local routes and also changes the default gw (I know I can prevent ...
0
votes
1answer
58 views

ASA 5505 - Outside IPs required for VPN Tunnel?

I've set up a Site-Site VPN and it seems the config is fine as the other site can establish the tunnel fine. The problem I have is that my side never tries to bring the tunnel up. Ping/telnet ...
0
votes
1answer
77 views

HP MSR20 Router VPN Questions

I have limited experience with routers, I was wondering if some offer some insight. I am considering deploying a series of HP MSR20 (or similar routers) at a number of satellite offices which have ...
0
votes
1answer
94 views

conflicts with home internet and VPN [closed]

Sorry for my English. I have a usb modem through which I go out to the Internet. I want to connect via VPN to the corporative network. The connection is successful. The corporation portal works ...
5
votes
0answers
909 views

Windows VPN server can talk to VPN clients, but won't send packets from its local network to the VPN clients

I want to configure Windows Server 2012, and its Windows 7 and Windows 8 VPN clients, with an SSTP VPN that uses split tunneling and off-subnet addressing, but I'm running into a problem: the RRAS ...
1
vote
0answers
112 views

RRAS and Static Routes for VPN

I've searched and searched and cannot find an answer (that I can understand). Here's my situation: I've got an office network using IP addresses like 192.168.1.1-255 and a home network using the same ...
2
votes
1answer
180 views

OpenVPN routed lans

Setup description: One VPN server called vpn1 One VPN client called vpn2 One network behind vpn1 with IP addresses 10.0.0.0/24 One network behind vpn2 with IP addresses 10.0.2.0/24 For simplicity ...
1
vote
0answers
59 views

OpenVPN routing between static hosts

I have an OpenVPN server with successful static-key tunnels to two separate hosts - my laptop, and another server elsewhere on the internet. I have connectivity over both OpenVPN tunnels. How do I ...
1
vote
1answer
1k views

pfSense OpenVPN clients routing

We've setup OpenVPN using pfSense 2.0.2. Local subnet is 192.168.1.0/24, VPN clients are 10.0.1.0/24 We also have another subnet 192.168.0.0/24 which is connected through pfSense IPSec as a ...
0
votes
1answer
60 views

Can only access servers from one side of the VPN

I'm experiencing a rather weird problem. I have a VPN up between two sites. The VPN connects via two SSG140 Firewalls. It was working fine for about a year and yesterday it just stopped function ...
0
votes
1answer
107 views

VPN with overlapping subnets?

We have a number of site to site VPN tunnels which each have a their own consecutive subnet, for example: Branch 1 - 192.168.1.0/24 Branch 2 - 192.168.2.0/24 Branch 3 - 192.168.3.0/24 Branch 4 - ...
1
vote
2answers
136 views

Route a specific user's traffic via VPN but still allow local networking

So, I want to route certain traffic via a VPN connection and the rest via my normal Internet connection. I want to run several different programs and most of them don't support binding to a specific ...
0
votes
1answer
63 views

Site to Site VPN Tunnels

This is more of a theoritcal question then a problem. With regards to Site to Site VPN links, let's for the sake of the question say we have two Sonicwall Firewalls. Site A and Site B SonicwallA ...
0
votes
1answer
41 views

Site-To-Site VPN Failover

Conceptually, how does this work/ would be configured in a Cisco environment, I realise this is quite an open question so please let me narrow it down. Let's say we have two sites: SiteA and SiteB, ...
0
votes
0answers
44 views

tunnel two windows or linux server with routing packets

I would like to use IPIP eoip tunnel for windows/linux. In addition, It's not necessary to be IPIP, I want to route connection from server 1 to server 2. You can see following flowchart: ...