0
votes
0answers
38 views

Persistent PPTP 807 through a single 877w edge router

Im setting up another vpn for cleaning malware infected computers remotely and some other things, Normally id use SSTP nat tcp 443 and be done in 5 minutes but in this case I need to use another ...
0
votes
0answers
281 views

Site-to-Site PPTP VPN connection between two Windows Server 2008 R2 servers

We have two Windows Server 2008 R2 machines, one in our main office and one in a new office which we have just moved offsite. The main office has previously been handling client-to-server PPTP VPN ...
0
votes
0answers
41 views

Unable to access network resources on SSTP connection

I am attempting to get a SSTP server online, I have managed to successfully connect a client to the server via SSTP however the client cannot access any network resources outside the SSTP gateway ...
0
votes
0answers
38 views

Weird RRAS issue

I am all of a sudden having a weird issue with my server hosting RRAS. about 2 weeks ago my RRAS client suddenly losses network communication with the remote LAN but the RRAS MMC shows that the client ...
0
votes
0answers
76 views

Cannot ping RRAS Client from RRAS server

I have recently created an RRAS pptp connection for an outside network. The RRAS client connects fine and can ping the RRAS server and every device on the RRAS servers local network. The RRAS server ...
0
votes
1answer
82 views

Windows 2012 R2 RRAS VPN Bandwidth issue (worked fine with 2008 R2)

3 machines : VPN Server (VS) Random Server (RS) My Personnal Computer (PC) PC and VS on different networks VS and RS are on same network VS can connect the internet directly and has a bandwidth of ...
0
votes
0answers
150 views

Repair RRAS and NAT on Windows Server 2008 R2

We have a Windows Server 2008 R2 server with RRAS installed and configure with VPN and NAT. NAT stopped working and when I checked, IPv4 is missing . I've tried re-installing RRAS but it just ...
0
votes
0answers
106 views

L2TP VPN disconnects on sustained file transfer from server LAN computer to VPN client

VPN Server: Windows Server 2008 x86 RRAS installed and running All necessary firewall ports are open, I no longer get rejected log entries Behind router which is DHCP, serving 192.168.0.2 to ...
0
votes
0answers
20 views

How does RRAS determine which routes to send to connecting clients?

My Active Directory schema has three sites: Production (10.2.1.0/24, 10.5.1.0/24) Location A (10.1.1.0/24) Location B (192.168.10.0/24) I have set up RRAS servers before in both Production and ...
0
votes
1answer
135 views

Unable to connect networkshares through VPN (RRAS server only)

I have a Windows Server 2008 SP2 with these Roles installed: File server Network Policy and Access Server / Routing and Remote Access Network Policy and Access Server / NPS The VPN connection is ...
0
votes
0answers
58 views

VPN/PPTP connection dialog doesn't list my certificate to choose

I'm trying to configure VPN connection with PPTP and authentication using SSL Certificate. Client is running Windows 7, RRAS/NPS is running Windows Server 2008 R2, Cert Authority is running Windows ...
0
votes
1answer
398 views

Windows Server 2012 VPN route from LAN to client

I am trying to set up a VPN using Windows Server 2012 Standard. My network has a SonicWALL edge router, and the server in question is a DC, running DNS, DHCP and RRAS, and the subnet is 10.0.0.0/24. ...
0
votes
1answer
85 views

Can connect through SSTP but not PPTP?

I have a window server 2008 r2 box behind a a Netgear AC1750 router. I've set up RRAS for a VPN and can successfully connect using SSTP, but if I try to connect to the VPN using PPTP I get a timeout ...
1
vote
1answer
473 views

VPN Connection Causes Internal LAN Connection Loss with Server

I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server ...
0
votes
1answer
381 views

Win2008 - restrict VPN user permissions

Windows 2008 R2 SP1 Foundations file server with no AD, only workgroup sharing some folders, and now a RRAS server. Shared folders are open to everyone in the office (XPs and Sevens) without ...
0
votes
1answer
67 views

Easy Deployment Split Tunnel VPN Connection

I was wondering if anybody could offer some insight as to how I can mass deploy VPN connection settings that support split tunneling. It has to work on both Mac and Windows systems though if a script ...
1
vote
2answers
249 views

How to configure RRAS to route all traffic through squid proxy?

I have a VPN server up and running on a windows server 2003. All the users are able to connect to the server and NAT their IP (use server IP and internet). but my problem is government filtering on my ...
6
votes
0answers
1k views

Windows VPN server can talk to VPN clients, but won't send packets from its local network to the VPN clients

I want to configure Windows Server 2012, and its Windows 7 and Windows 8 VPN clients, with an SSTP VPN that uses split tunneling and off-subnet addressing, but I'm running into a problem: the RRAS ...
1
vote
0answers
138 views

RRAS and Static Routes for VPN

I've searched and searched and cannot find an answer (that I can understand). Here's my situation: I've got an office network using IP addresses like 192.168.1.1-255 and a home network using the same ...
0
votes
0answers
287 views

Lost internet connection after configuring RRAS on my Windows 2008 R2 server

I've tried setting up a VPN server on my Windows 2008 R2 virtual server using the steps outlined in the following link: ...
0
votes
0answers
100 views

Windows 2008 RRAS VPN Users can resolve DNS but not ping to internet or surf internet when connected

I am setting us a Windows 2008 R2 Rras server on internal network 10.70.0.231 there is a DC running with DNS and DHCP on 10.70.0.230. Users are assigned 10.70.0.50-100 when connecting to VPN in RRAS. ...
0
votes
1answer
352 views

Windows Server 2008 R2 - RAS SSTP - HTTP 503 Service is unavailable

I have a Windows Server 2008 R2 machine that has the following configuration: It's a domain controller It runs IIS and serves the Default Website with HTTP bindings 0.0.0.0:80 and [::]:80 and with ...
0
votes
1answer
953 views

Static routes for VPN clients not working in Windows Server 2008 R2 RRAS

I am configuring a simple hub-and-spoke VPN using Windows Server 2008 R2 and RRAS. It is going very well and I now have a router configured to establish a VPN connection to the server. However, I have ...
3
votes
1answer
327 views

Hub-and-Spoke VPN using Window Server 2008 R2 and RRAS

I am trying to create a simple VPN hub-and-spoke topography. I have managed to get quite a long way and I hope the following diagram describes what I have been able to build thus far: As you can ...
0
votes
1answer
205 views

Configuring RRAS with WS2K8R2 VPC

I have configured a Server 2008 R2 instance in a VPC with 2 subnets. The server is configured as a DC, RRAS and CA and a NIC in each VPC subnet. SSTP VPN clients can reach the server but either the ...
0
votes
0answers
468 views

RRAS PPTP VPN Connected but not get ping my local LAN

Two days back i had configure RRAS VPN server on Windows server 2008 Std R2 with two (LAN (192.168.100.173 with 255.255.255.0 subnet, without gateway,no DNS -- only ip Address was there) / WAN ...
0
votes
1answer
388 views

How to configure RRAS VPN behind a DSL router on as single NIC 2008 R2

I already had this running once with an older server, but now I changed hardware and cannot get this running again (I'm more a dev than a admin). Here's my network setup: Internet | DSL Router | ...
0
votes
1answer
1k views

How to access VPN server itself over a VPN set up with RAS?

I created a split-tunnel VPN connection to a remote server (suppose name is ABC), so I could access both the Internet and resources on the remote network simultaneously from the client. I can access ...
0
votes
1answer
128 views

Cannot connect two users to windows's VPS's VPN

I have a private VPN server in my VPS using windows Routing and Remote access. Now I cannot connect from two devices (e.g. IPad and my Laptop) in same time. I tried to change the properties but I've ...
0
votes
0answers
488 views

Setup Single NIC DC RRAS with Firewall

I have a single NIC DC server set up for a few local client machines to mainly serve Files and provide a consistent computing environment across local client workstations thru Folder Redirection. ...
2
votes
1answer
1k views

RRAS VPN - Clients don't receive DNS suffix

I've setup a VPN connection using RRAS on Windows Server 2008 and clients are able to connect through the firewall. However, RRAS is not assigning a DNS suffix to the clients when they connect. I ...
-2
votes
1answer
148 views

RRAS vs. Open VPN [closed]

Performance wise, which is better, RRAS or OpenVPN? I'm thinking of moving to a new server but if I do, then I'll have to ditch RRAS, and switch to OpenVPN.. So back to my original question ...
1
vote
0answers
630 views

RRAS with DHCP when the IP pool is on a different subnet

I run a small business network and the last couple of days I have been setting up some equipment to add VPN capabilities to our network. I've got the following set up: Windows 2008 R2 with RRAS - ...
1
vote
0answers
175 views

Using RRAS to route network traffic through a VPN to the internet

I was hoping someone could help me setup a RRAS server to provide the following functionality. CLIENT --> RRAS SERVER --> VPN --> INTERNET I've managed to get the client talking through the RRAS ...
0
votes
1answer
1k views

Microsoft RAS or NAP to assign VLAN per user credentials

I need to provide remote network access that is restricted depending on the user that dials in (i.e. different users are placed on different VLANs). I will then implement firewall security (on a ...
0
votes
1answer
199 views

Copying compressed files from Server 2008 R2 network share to XP client via VPN fails

At the first sight the question looks similar to this one. I have experienced an odd behavior while trying to copy a certain file from Windows Server 2008 R2 network share to Windows XP Professional ...
0
votes
1answer
268 views

share one vpn connection through windows rras with other clients

I'm having a Cisco VPN connection to access our branch office. Since several people using the VPN I'm planing to install the VPN client on one of our server and share it through RRAS to save the ...
0
votes
1answer
367 views

Windows 2003 server RRAS on VPC

I'm trying to setup a L2TP VPN server(to give user access on to all my VPN instance) on a Windows 2003 instance running on my VPC. While trying to enable RRAS I'm getting error, "less than two network ...
1
vote
0answers
336 views

What steps can I follow to diagnose why PPTP VPN (rasClient) has suddenly stopped connecting?

I use my a Windows Server 2008 R2 workstation as a VPN client to a Windows 2003 RRAS VPN host. It has worked flawlessly for many months. All of sudden, rasClient stops connecting and throws: Error ...
0
votes
2answers
312 views

Windows 2008 Standard 64bit only have VPN & Dial Up options in Routing and Remote Access Server Setup Wizard

System: Windows 2008 SP2 Standard Version 64Bit Network Card: only 1 Object: Set up VPN Guide: http://blog.thesysadmins.co.uk/server-2008-r2-pptp-vpn-with-1-nic.html Problem: How come I can only ...
2
votes
1answer
353 views

Changing Forefront TMG VPN Certificate

I need to change my TMG server from an old VPN server certificate to a new one due to changing my internal CA structure. Where the heck do I do that? I don't see any certificate references in TMG ...
0
votes
2answers
172 views

Accessing machine by name in a Windows 2003 RRAS VPN not working as required

I have a Windows 2003 RRAS VPN with two clients (both running Windows 7). The VPN works as expected, except that I am unable to access any of the three machines in the network using their Windows ...
1
vote
0answers
247 views

Windows Server 2008 DHCP with RRAS

I have a Windows Server 2008 R2 which is a member of a domain, but is placed in a remote location. The server is directly connected to Internet. Clients need to access a particular insecure TCP ...
2
votes
1answer
385 views

Route Server 08 R2 VPN (PPTP) traffic to two subnets (public & private)

I recently transitioned our VPN server from a Windows Server '03 box to '08 R2, both using built-in Routing and Remote Access for PPTP connections. Our firewall has a rule that forwards traffic from a ...
1
vote
2answers
220 views

Windows 2003 vs Windows 2008 VPN

I'm having trouble to figure out something that Microsoft changed from Win 2003->2008 VPN. This is my setup: office #1 subnet #1: 192.168.0.0/255.255.255.0 subnet #2: 10.202.0.0/255.255.0.0 ...
0
votes
1answer
292 views

Is it possible to use RRAS to create a tunnel over same subnet

I would like to setup some form of secure tunnel between servers on the same lan. We are currently using rackspace for cloud hosting, and would like to secure all communications over the 'private' ...
0
votes
1answer
77 views

Is it possible to have an account login more than once to Windows Server 2k3 VPN (RRAS)?

I'm creating an account for one of our support vendors to be able to login to VPN on our Windows 2003 AD domain. There may be multiple engineers logging in to the network, so is there a way to have a ...
0
votes
0answers
65 views

2NIC RRAS doesn't reply to remote requests

I have a RRAS server configured with two NIC's, one LAN and one for WAN. LAN is 192.168.0.x and the WAN is 192.168.2.x. I can connect perfect through the WAN NIC subnet, but when I go through the ...
0
votes
2answers
2k views

No DNS resolving with VPN (RRAS)

I have a RRAS server setup on a Windows 2003 machine with two NIC's. The VPN works like a charm, I can ping all the other computers on the network. But it fails when I try to access resources with ...
1
vote
2answers
700 views

Can't connect to RRAS server remotely

I have a Windows Server 2003 with RRAS (1 NIC) configured. It works like a charm when I connect to the VPN server directly on the same LAN. But it fails when I try to connect to it from the WAN. So ...