0
votes
1answer
35 views

Can you publish a public IP route over a Windows RRAS VPN?

I'm trying to direct traffic to a public IP range to travel over our VPN without redirecting all traffic over the VPN. I've added the IP via RRAS > VPN > IPv4 > Static Routes however, the public IP ...
0
votes
1answer
71 views

Unable to connect networkshares through VPN (RRAS server only)

I have a Windows Server 2008 SP2 with these Roles installed: File server Network Policy and Access Server / Routing and Remote Access Network Policy and Access Server / NPS The VPN connection is ...
0
votes
1answer
59 views

Can connect through SSTP but not PPTP?

I have a window server 2008 r2 box behind a a Netgear AC1750 router. I've set up RRAS for a VPN and can successfully connect using SSTP, but if I try to connect to the VPN using PPTP I get a timeout ...
1
vote
1answer
166 views

VPN Connection Causes Internal LAN Connection Loss with Server

I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server ...
0
votes
2answers
150 views

how to disable RRAS on windows 2008 r2 pre-reserving blocks of IPs

I have a problem where one of the DHCP scopes has exhausted its scope of IPs. Investigating, I found that a couple of the window 2008 r2 servers were reserving blocks of IPs for RAS running on the ...
0
votes
1answer
38 views

Is there a way to find out who was previously assigned an IP via RRAS VPN?

I need to figure out who had a specific IP for an event from yesterday that was connected through our RRAS VPN. Are any logs or anything else where I can find this information? I've looked at Event ...
0
votes
0answers
178 views

Lost internet connection after configuring RRAS on my Windows 2008 R2 server

I've tried setting up a VPN server on my Windows 2008 R2 virtual server using the steps outlined in the following link: ...
-1
votes
2answers
132 views

using server as default gateway with static routes [closed]

Given a server or workstation (e.g. windows7, windows server 2008R2) with 2 NICs, can I use it as a simple gateway between 2 LAN segments using only static routes, or do I need to set up additional ...
0
votes
0answers
81 views

Windows 2008 RRAS VPN Users can resolve DNS but not ping to internet or surf internet when connected

I am setting us a Windows 2008 R2 Rras server on internal network 10.70.0.231 there is a DC running with DNS and DHCP on 10.70.0.230. Users are assigned 10.70.0.50-100 when connecting to VPN in RRAS. ...
0
votes
0answers
299 views

RRAS PPTP VPN Connected but not get ping my local LAN

Two days back i had configure RRAS VPN server on Windows server 2008 Std R2 with two (LAN (192.168.100.173 with 255.255.255.0 subnet, without gateway,no DNS -- only ip Address was there) / WAN ...
0
votes
1answer
788 views

How to access VPN server itself over a VPN set up with RAS?

I created a split-tunnel VPN connection to a remote server (suppose name is ABC), so I could access both the Internet and resources on the remote network simultaneously from the client. I can access ...
0
votes
1answer
101 views

Cannot connect two users to windows's VPS's VPN

I have a private VPN server in my VPS using windows Routing and Remote access. Now I cannot connect from two devices (e.g. IPad and my Laptop) in same time. I tried to change the properties but I've ...
3
votes
6answers
2k views

Cannot start ` Secure Socket Tuning Protocol Service`

I tried to start Routing and Remote Access Service but I've got an error says the dependency service or group failed to start then I tried to start Remote Access Connection Manager (one of RRAS's ...
1
vote
1answer
969 views

RRAS VPN - Clients don't receive DNS suffix

I've setup a VPN connection using RRAS on Windows Server 2008 and clients are able to connect through the firewall. However, RRAS is not assigning a DNS suffix to the clients when they connect. I ...
1
vote
0answers
139 views

Using RRAS to route network traffic through a VPN to the internet

I was hoping someone could help me setup a RRAS server to provide the following functionality. CLIENT --> RRAS SERVER --> VPN --> INTERNET I've managed to get the client talking through the RRAS ...
1
vote
1answer
5k views

RRAS won’t start with 8007042a or event ID 7024, aka the “routing remote access unable to load Iprtrmgr.dll”

History: The history of this error, which has mostly gone unsolved, dates back to Windows 2000. Platforms affected: Windows Server 2008 R2, Server 2008, Server 2003 R2, Server 2003, Server 2000 (both ...
1
vote
1answer
288 views

Is L2TP preshared key anywhere stored in plaintext on w2k8?

Some time ago I have configured l2tp vpn server on w2k8 rras that uses preshared key. Now I am trying to setup another client but the key that I have documented does not seem to be correct. I have ...
0
votes
1answer
280 views

Windows 2008 Standard 64bit only have VPN & Dial Up options in Routing and Remote Access Server Setup Wizard

System: Windows 2008 SP2 Standard Version 64Bit Network Card: only 1 Object: Set up VPN Guide: http://blog.thesysadmins.co.uk/server-2008-r2-pptp-vpn-with-1-nic.html Problem: How come I can only ...
4
votes
2answers
3k views

Windows remote access server (PPTP) advertised routes

How does a routing and remote access server pick up routes to advertise to clients, and where can a list of routes being provided be reviewed? One of our users is reporting that the server is ...
1
vote
1answer
172 views

RRAS multiple different external IPs

I have a Windows 2008 RRAS server with 4 external IP's. Is it possible within RRAS to send outbound traffic through each external IP address once I'm connected to the VPN on that specific IP address? ...
2
votes
1answer
315 views

Route Server 08 R2 VPN (PPTP) traffic to two subnets (public & private)

I recently transitioned our VPN server from a Windows Server '03 box to '08 R2, both using built-in Routing and Remote Access for PPTP connections. Our firewall has a rule that forwards traffic from a ...
1
vote
2answers
204 views

Windows 2003 vs Windows 2008 VPN

I'm having trouble to figure out something that Microsoft changed from Win 2003->2008 VPN. This is my setup: office #1 subnet #1: 192.168.0.0/255.255.255.0 subnet #2: 10.202.0.0/255.255.0.0 ...
0
votes
1answer
287 views

Is it possible to use RRAS to create a tunnel over same subnet

I would like to setup some form of secure tunnel between servers on the same lan. We are currently using rackspace for cloud hosting, and would like to secure all communications over the 'private' ...
2
votes
2answers
7k views

Why would NPS suddenly stop authenticating users?

We use a computer running Windows Server 2008 (32-bit) with the RRAS and NPS roles to authenticate users for VPN and wireless access over RADIUS. This configuration has been working great for more ...
0
votes
1answer
683 views

Routing between two subnets on Windows Server 2008

I have a Windows Server 2008 box. One interface is on a VPN (5.140.164.156/8) and one is on the local netowrk (192.168.1.253/24) I have enabled RRAS and on a different machine on my LAN I have added a ...
0
votes
1answer
1k views

Single NIC VPN Setup on Server 2008 R2 and RRAS

Is it possible to set up a VPN server on a machine running Server 2008 R2, when you only have one NIC? I'm trying to connect to my server with the following setup Windows 7 -> Internet -> Linksys ...
2
votes
0answers
307 views

VPN client has severe intermittent connectivity issue with Windows 2008 RRAS server, but NOT with the other remote servers

I have a Windows 2008 server setup in the cloud as a RRAS running VPN access and NAT. It is joined to a domain controller also running in the cloud. A Windows 7 VPN client connects using SSTP to the ...
0
votes
1answer
794 views

Windows Server 2008 VPN creates a DNS record and breaks server access for internal clients

We have a server running Windows Server 2008. It runs DC, DNS etc and has RRAS configured. Users can VPN OK, with no issues. Under normal operation server can be found at .3, however once a VPN user ...
0
votes
1answer
439 views

Hyper-v Internal Network - No internet Access

I am trying to setup a virtual network in Hyper-V to give my VM internet access. I have created an internal and external network, and I see both connections inside of the Network Connections manager. ...
-1
votes
1answer
614 views

VirtualBox, client can't connect to Windows server 2008 (2 NIC's)

I have a virutal environment as follows: a Windows server 2008 with two NIC's. One NIC is connected to internel 'LAN' and the other to 'LAN2'. Roles: DHCP, AD, DNS and RRAS. a Windows 7 client. The ...
1
vote
2answers
355 views

2008r2 RRAS VPN issue due to poor domain naming. Any ideas?

We have a domain with 900+ clients and 250+ workstations that has the name of the domain the same as it's public domain name (we'll call it example.org). I'm trying to set up RRAS VPN, and it works ...
0
votes
0answers
493 views

Multicast Packets do not Reach all VPN Clients

I am trying to setup a PPTP VPN using RRAS on Server 2008 R2. I've got RRAS setup and working, and clients can connect to it using Windows XP or Windows 7 (my two target platforms.) However, my ...
1
vote
1answer
112 views

Can a Windows DirectAccess Server also be a RRAS server?

We are upgrading our domain to Windows server 2008 R2 and I was wondering if anyone here has ever tried to make a directaccess server run RRAS so that you could also support standard VPN clients as ...
0
votes
1answer
1k views

Windows Server (SBS) 2008 - Telephony service won't start (missing permissions)

I am running a SBS 2008 server. It's setup as the domain controller for the network. After a reboot, the Telephony service (and all services that depend on it) refuses to start under the Network ...
0
votes
1answer
2k views

Windows Server 2008 R2 RRAS VPN client routing

Our company network is 10.0.0.0/24 (not /8 as the class suggests, this wasn't my decision, and sadly can't be changed). We set up an RRAS VPN server. Windows 7 clients are advised to be set up not to ...
2
votes
1answer
548 views

RRAS on Win2k8 has bound to additional IP address 443 - how to stop?

I have Apache 2.2 running Subversion on my Win2k8 box. This has been setup for a few years like this. The server has 1x NIC, with 2x IP addresses assigned, eg: 192.168.1.50 192.168.1.51 The ...
1
vote
1answer
206 views

How to route all packets through Windows web server 2008?

I have the following sitiuation I have dedicated server with IP 85.25.148.23/255.255.255.0 GW 85.25.148.1 running windows web server 2008 I installed VMware on it having linux centos OS I found a ...
1
vote
0answers
305 views

After enbaling VPN/NAT on 2008 R2 direct access to server is blocked (RDP, FTP,…)

After setting up VPN with NAT over RRAS configuration menu in windows server 2008 R2, direct access to server is blocked. Does anybody know why is this happening? How to enable RDP, FTP, and other ...
0
votes
1answer
346 views

After NAT how to setup VPN in windows server 2008 r2?

We have one windows server 2008 R2 with about 10 Hyper-V virtual machines. We've used wizard that comes when you enable RRAS to setup NAT, so that virtual machines can connect to internet (and to ...
0
votes
1answer
669 views

Configuring RRAS and network settings on Windows Server 2008 R2

I have a brand new Windows server 2008 R2, which I want to configure for one of our branch offices connected by a permanent VPN link. I have configured RRAS before but this time I am having a few ...
0
votes
1answer
337 views

Trouble printing to local printer when connected to VPN with split-tunneling enabled

I'm a volunteer network admin for a multi-tenant non-profit office space. One of our new tenants uses a VPN to connect to remote resources using RRAS and Small Business Server 2008. They also have a ...
0
votes
4answers
1k views

Windows 2008 Routing and Remote access server - access to the internet

I have a windows 2008 r2 remote access server set up and running. The remote access works fine. My problem is that the remote access server itself doesn't have access to the internet. The box has two ...
1
vote
0answers
1k views

SSTP VPN Windows Server 2008 - Clients can't access Internet Through the VPN

I have setup a SSTP VPN connect and it is assigning the local IP address to the client, e.g. 192.168.0.10. The server has two NICs, private and public. The private is on a 10.180.x.x IP address and ...
0
votes
2answers
164 views

Server 2003 Natting and dual Nics

Ok guys Im sure this is a pretty simple solution but im not exactly sure what the answer may be. I have setup a lab. 6 server 2003 Standard installs and 1 server 2008 install. I have 2 Dcs and the ...
2
votes
1answer
1k views

Assistance on setup to Connect an offsite server to the LAN via RRAS VPN - Server 2008 R2

I have an office LAN protected using a Zyxel Zywall USG 300. I've set up an L2TP/ipsec VPN on that which accepts connections using a shared secret and I've tested this from multiple clients. I have a ...
1
vote
1answer
729 views

Reverse NAT Setup for Hyper-V on Win 2008 R2

I'm trying to setup a Linux server behind a Windows Hyper-V host that will help supply some of the services (SSH, HTTPS, etc). However getting RRAS configured for reverse NAT (port forwarding) turned ...
0
votes
1answer
3k views

Windows Server 2008 R2, RRAS and NAT

I have a server running VMWare ESXi with one physical NIC. This server is running 3 VMs (S1, S2, and S3) which are all running Windows Server 2008 R2. I want to set up NAT routing on this server ...
3
votes
2answers
3k views

How do I setup a site-to-site VPN between two Windows 2008 servers?

We have a Windows 2008 server that we want to move offsite to the cloud (we're using Rackspace). It has to talk to our Active Directory domain constantly, so we need a stable site-to-site VPN between ...
0
votes
1answer
340 views

Persistent connection between RRAS servers?

I currently have a Server 2008 server at the office and a Server 2008 R2 server at a Data Center. Both have RRAS installed for PPTP VPN access. The office server is behind a router, is there a way ...
4
votes
2answers
383 views

Login-time quota for VPN users

I have configured Routing and Remote Access Service in Windows Server 2003 as the VPN server. VPN users are defined in Active Directory which is running on this server too. How i can configure the ...